Skip to content

Latest commit

 

History

History
90 lines (67 loc) · 4 KB

README.md

File metadata and controls

90 lines (67 loc) · 4 KB

hacs_badge GitHub release (latest by date) GitHub all releases

Home Assistant: Wibeee (and Mirubee) energy monitor custom component

Wibeee logo

Features

Integrates CIRCUTOR Wibeee/Mirubeee energy monitoring devices into Home Assistant. Works with single and three-phase versions.

Sensors

Provides the following sensors, one for each clamp using _L1/_L2/_L3 suffixes.

Sensor Unit Description
wibeee_<mac_addr>_active_energy Wh Active Energy
wibeee_<mac_addr>_active_power W Active Power
wibeee_<mac_addr>_apparent_power VA Apparent Power
wibeee_<mac_addr>_capacitive_reactive_energy VArCh Capacitive Reactive Energy
wibeee_<mac_addr>_capacitive_reactive_power VArC Capacitive Reactive Power
wibeee_<mac_addr>_frequency Hz Frequency
wibeee_<mac_addr>_inductive_reactive_energy VArLh Inductive Reactive Energy
wibeee_<mac_addr>_inductive_reactive_power VArL Inductive Reactive Power
wibeee_<mac_addr>_current A Current
wibeee_<mac_addr>_power_factor PF Power Factor
wibeee_<mac_addr>_phase_voltage V Phase Voltage

In three-phase devices the _L4 sensors contain the total readings across all phases.

Installation

Use HACS (preferred) or follow the manual instructions below.

Installation with HACS

Custom repository installation:

  1. Open Integrations inside the HACS configuration.
  2. In the top right corner, click on the 3 dots and select Custom repositories
  3. Add the custom repository URL https://github.com/luuuis/hass_wibeee and select Integration as the category in the list, then click Add.
  4. Click the + button in the bottom right corner, select this Wibeee component and Install this repository in HACS.
  5. Once installation is complete, restart Home Assistant

Manual installation

  1. Download hass_wibeee.zip from the latest release in https://github.com/luuuis/hass_wibeee/releases/latest
  2. Unzip into <hass_folder>/config/custom_components 
    $ unzip hass_wibeee.zip -d <hass_folder>/custom_components/wibeee
  3. Restart Home Assistant

Configuration

Add device to home assistant configuration file configuration.yaml and provide the IP address of the energy monitor on your network.

sensor:
- platform: wibeee
  host: 192.168.1.xx # use static IP
  scan_interval: 15  # optional, defaults to 15 seconds
- platform: wibeee
  host: 192.168.1.yy # add a second device

Optionally, configure extra template sensors for grid consumption and feed-in to use with Home Energy Management. See SENSOR_EXAMPLES.md for suggested sensors that will help you get the most out of the integration.

Logging

To set up the logger for this custom component add following lines to configuration.yaml

logger:
  default: warn
  logs:
    custom_components.wibeee.sensor: info

Possible log levels: info, debug, warn, error.

Example View in Home Assistant

Example View in Home Assistant

Useful links

Home Assistant Community thread: https://community.home-assistant.io/t/new-integration-energy-monitoring-device-circutor-wibeee/45276/176