ideaMaker Dreamer NX Start End G Codes examples

[Lucien-X]

---

ideaMaker

Introduction by DrVax

FF DNX ideamaker configs.zip

Start:

;Start Gcode
G90
M140 S{temperature_heatbed}     ;Heat bed up to first layer temperature
M190 S{temperature_heatbed}     ;Wait for Heat Bed temperature
M104 S{temperature_extruder1}   ;Set nozzle temperature to first layer temperature
M109 S{temperature_extruder1}    ;Wait for Extruder temperature
M107 ;start with the fan off
G28
M117 Purge extruder...
G1 Z{print_pos_min_z} F420
;Purge line
G1 X-110.00 Y-60.00 F4800
G1 Z{print_pos_min_z} F420
G92 E0
G1 X-110.00 Y60.00 E17,4 F1200
;Purge line end
G92 E0
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
M117 Printing...

End:

;end gcode
M140 S0 ; turn off heatbed
M104 S0 ; turn off temperature
G28 X Y
M84 X Y E ; disable motors

---

[Lucien-X]

@moonglow This snippet maybe helpful with people who always wanna try some thing new.
Could you append this in your documention below?
https://github.com/moonglow/FlashForge_Marlin/wiki/FlashForge-Dreamer-NX-Start-End-G-Codes-examples

[moonglow]

Done ! Thank you