Bug fixes

• ALL

  • Added

    • Support for Python 3.7 - #895
    • __version__ for all drivers - #928

  • Changed

    • No longer globally set warnings filter for DriverWarning - if you want all warnings from the driver, you will need to set warnings.filterwarnings("always", category=<driver>.DriverWarning) in your code
    • Fix __repr__ for niscope.WaveformInfo - #920

• NI-SCOPE

  • Changed

    • Format of output of wavefrom_info.str()

• NI Switch Executive

  • Added

    • Initial Release

Official 1.0 release

1.0.0 - 2018-06-08

• ALL

  • Removed

    • Explicitly disallow using a repeated capability on Session. session[0].vertical_range = 1.0 will no longer work. Instead use session.channels[0].vertical_range = 1.0 - #853

• NI-DMM

  • Changed

    • Fixed name freq_voltage_autorange became freq_voltage_auto_range

  • Removed

    • configure_ac_bandwidth() - #875
    • configure_open_cable_comp_values() - #875
    • configure_power_line_frequency() - #875
    • configure_short_cable_comp_values() - #875
    • get_aperture_time_info() - #875
    • get_auto_range_value() - #875
    • get_measurement_period() - #875
    • latency - #875
    • shunt_value - #875
    • meas_dest_slope - #875
    • sample_trigger_slope - #875
    • trigger_slope - #875

• NI-ModInst

  • Changed

    • Double close will now allow NI-ModInst to return error

• NI-Switch

  • Removed

    • cabled_module_scan_advanced_bus - #881
    • cabled_module_trigger_bus - #881
    • master_slave_scan_advanced_bus - #881
    • master_slave_trigger_bus - #881
    • parsed_scan_list - #881
    • trigger_mode - #881
    • scan_advanced_polarity - #881
    • trigger_input_polarity - #881
    • configure_scan_list() - #881
    • configure_scan_trigger() - #881
    • route_trigger_input() - #881
    • set_continuous_scan() - #881

• NI-DCPower

  • Removed

    • Remove trigger configuration methods, use attributes instead #860
      • configure_digital_edge_measure_trigger() - use session.digital_edge_measure_trigger_edge & session.digital_edge_measure_trigger_input_terminal
      • configure_digital_edge_pulse_trigger() - use session.digital_edge_pulse_trigger_edge & session.digital_edge_pulse_trigger_input_terminal
      • configure_digital_edge_sequence_advance_trigger() - use session.digital_edge_sequence_advance_trigger_edge & session.digital_edge_sequence_advance_trigger_input_terminal
      • configure_digital_edge_source_trigger() - use session.digital_edge_source_trigger_edge & session.digital_edge_source_trigger_input_terminal
      • configure_digital_edge_start_trigger() - use session.digital_edge_start_trigger_edge & session.digital_edge_start_trigger_input_terminal
    • Remove polarity attributes for triggers that are PXI backplane only (only support rising edge) #860
      • digital_edge_measure_trigger_edge
      • digital_edge_pulse_trigger_edge
      • digital_edge_sequence_advance_trigger_edge
      • digital_edge_source_trigger_edge
      • digital_edge_start_trigger_edge

• NI-FGEN

  • Changed

    • num_channels attribute renamed to channel_count - now consistent with other drivers
    • send_software_edge_trigger() no longer takes any parameters.
      • To send a start software trigger, call it on the session directly:
        python session.send_software_edge_trigger()
      • To send a script software trigger, call it on the script triggers container:
        python session.script_triggers[1].send_software_edge_trigger()

  • Removed

    • Remove trigger configuration methods, use attributes instead #860
      • configure_digital_edge_script_trigger() - use session.digital_edge_script_trigger_source & session.digital_edge_script_trigger_edge
      • configure_digital_level_script_trigger() - use session.digital_level_script_trigger_source & session.digital_level_script_trigger_active_level
      • configure_digital_edge_start_trigger() - use session.digital_edge_start_trigger_source & session.digital_edge_start_trigger_edge
    • Removed get_fir_filter_coefficients() - #535, #596

• NI-SCOPE

  • Added

    • niscope_fetch_forever.py example

  • Removed

    • Removed default value for level parameter on configure_trigger_edge()
      • parameter list is now

        configure_trigger_edge(self, trigger_source, level, trigger_coupling, slope=enums.TriggerSlope.POSITIVE, holdoff=datetime.timedelta(seconds=0.0), delay=datetime.timedelta(seconds=0.0))

    • Removed default values for level and hysteresis parameters on configure_trigger_hysteresis()
      • parameter list is now

        configure_trigger_hysteresis(self, trigger_source, level, hysteresis, trigger_coupling, slope=enums.TriggerSlope.POSITIVE, holdoff=datetime.timedelta(seconds=0.0), delay=datetime.timedelta(seconds=0.0))

API and Documentation cleanup

• ALL

  • Added

    • Add session.lock() and session.unlock() to all drivers except nimodinst - #846
    • session.lock() returns a context manager for managing locks - #846
    • Fix thread-safety issues by using IVI session lock where aplicable

  • Changed

    • SelfTestError now inherits from <driver>.Error rather than Exception - #830
    • Warning class name changed to <driver>.DriverWarning for all drivers - #658

  • Removed

    • IVI properties as applicable - some were already removed from some drivers #824
      • engine_major_version
      • engine_minor_version
      • engine_revision
      • primary_error
      • secondary_error
      • error_elaboration
      • io_session_type
      • io_session / visa_rm_session
      • group_capabilities
      • interchange_check
      • range_check
      • record_coercions
      • specific_driver_class_spec_major_version
      • specific_driver_class_spec_minor_version
      • query_instrument_status
      • cache
      • specific_driver_prefix

• NI-DCPower

  • Removed

    • export_signal() - #828
    • active_advanced_sequence #832
    • active_advanced_sequence_step #832
    • Default value for trigger parameter on send_software_edge_trigger() #832

• NI-FGEN

  • Changed

    • Some functions missed setting repeated capabilities, leaving these as parameters instead of using the repeated capabilites object.
      • session.configure_digital_edge_script_trigger('ScriptTrigger0', source, ...) becomes session.script_triggers[0].configure_digital_edge_script_trigger(source, ...)
      • session.configure_digital_level_script_trigger('ScriptTrigger0', source, ...) becomes session.script_triggers[0].configure_digital_level_script_trigger(source, ...)

  • Removed

    • export_signal() - #828
    • osp_fir_filter_interpolation - #864
    • osp_fir_filter_gaussian_bt - #864
    • osp_fir_filter_flat_passband - #864
    • osp_fir_filter_enabled - #864
    • osp_enabled - #864
    • osp_data_processing_mode - #864
    • osp_compensate_for_filter_group_delay - #864
    • osp_cic_filter_interpolation - #864
    • osp_cic_filter_gain - #864
    • osp_cic_filter_enabled - #864
    • osp_carrier_phase_q - #864
    • osp_carrier_phase_i - #864
    • osp_carrier_frequency - #864
    • osp_carrier_enabled - #864
    • osp_pre_filter_offset_q - #864
    • osp_pre_filter_offset_i - #864
    • osp_pre_filter_gain_q - #864
    • osp_pre_filter_gain_i - #864
    • osp_overflow_status - #864
    • osp_overflow_error_reporting - #864
    • osp_mode - #864
    • osp_frequency_shift - #864
    • osp_fir_filter_type - #864
    • osp_fir_filter_root_raised_cosine_alpha - #864
    • osp_fir_filter_raised_cosine_alpha - #864
    • ready_for_start_event_level_active_level - #859
    • started_event_level_active_level - #859
    • done_event_level_active_level - #859
    • started_event_output_behavior - #859
    • done_event_output_behavior - #859
    • marker_event_output_behavior - #859
    • marker_event_pulse_polarity - #859
    • started_event_pulse_polarity - #859
    • done_event_pulse_polarity - #859
    • started_event_pulse_width - #859
    • done_event_pulse_width - #859
    • marker_event_pulse_width - #859
    • started_event_pulse_width_units - #859
    • done_event_pulse_width_units - #859
    • marker_event_pulse_width_units - #859
    • marker_event_toggle_initial_state - #859
    • marker_event_live_status - #859
    • ready_for_start_event_live_status - #859
    • marker_event_latched_status - #859
    • done_event_latched_status - #859
    • started_event_latched_status - #859
    • marker_event_delay - #859
    • started_event_delay - #859
    • done_event_delay - #859
    • marker_event_delay_units - #859
    • started_event_delay_units - #859
    • done_event_delay_units - #859
    • direct_dma_enabled - #858
    • direct_dma_windowaddress - #858
    • direct_dma_window_size #858
    • gain_dac_value - #88
    • offset_dac_vaue - #858
    • id_query_respone - #858
    • oscillator_freq_ac_value - #858
    • oscillator_phase_dac_vale - #858
    • post_amplifier_attenuatio - #858
    • pre_amplifier_attenuation - #858
    • p2p_endpoint_fullness_strt_trigger_level - #858
    • pci_dma_optimizations_enabled - #858
    • sample_clock_absolute_delay- #858
    • synchronization - #858
    • sync_duty_cycl_high - #858
    • sync_out_output_terinal - #858
    • trigger_source - #858
    • video_wavefor_type - #858

• NI-SCOPE

  • Removed

    • Properties removed
      • stream_relative_to #825
      • oscillator_phase_dac_value #825
      • mux_mode_register #825
      • ddc_center_frequency #823
      • ddc_data_processing_mode #823
      • ddc_enabled #823
      • ddc_frequency_translation_enabled #823
      • ddc_frequency_translation_phase_i #823
      • ddc_frequency_translation_phase_q [#823](#823...

More API Clean up - multiple source breakers

• ALL

  • Changed

    • All exceptions raised by the Python bindings inherit from <driver>.Error
    • Exception type formerly known as <driver>.Error is now known as <driver>.DriverError
      • This encapsulates any error that is returned by the underlying driver
    • All timeout parameters can now also take a simple number in seconds. timeout=datetime.timedelta(milliseconds=100) and timeout=0.1 are identical. #796

• NI-DMM

  • Changed

    • Enum values that start with an underscore + digit have been renamed
      • Function._2_WIRE_RES --> Function.TWO_WIRE_RES
      • Function._4_WIRE_RES --> Function.FOUR_WIRE_RES
      • ThermistorType._44004 --> ThermistorType.THERMISTOR_44004
      • ThermistorType._44006 --> ThermistorType.THERMISTOR_44006
      • ThermistorType._44007 --> ThermistorType.THERMISTOR_44007
      • TransducerType._2_WIRE_RTD --> TransducerType.TWO_WIRE_RTD
      • TransducerType._4_WIRE_RTD --> TransducerType.FOUR_WIRE_RTD
    • Session.get_ext_cal_recommended_interval() now returns a datetime.timedelta for the interval #794

• NI-DCPower

  • Changed

    • Session.fetch_multiple() and Session.measure_multiple() now return list of named tuples instead of multiple arrays. See fetch_multiple and measure_multiple
    • Session.cal_self_calibration() renamed to Session.self_cal() to match other drivers - issue #615
    • Session.set_sequence() values parameter no longer has a default value and must be passed in. Parameter order has changed as a result of this - issue #797
    • Session constructor channel parameter can now use any channel format that repeated capabilities can use #807
    • Session.get_ext_cal_recommended_interval() now returns a datetime.timedelta for the interval #794

  • Removed

    • Advanced Sequence functions - until #504 can be fixed in a proper way
      • create_advanced_sequence()
      • create_advanced_sequence_step()
      • delete_advanced_sequence()

• NI-FGEN

  • Changed

    • Session.export_signal() signal_identifier now has a default of "". This moves it to the end of the parameter list #801
    • Session.get_ext_cal_recommended_interval() now returns a datetime.timedelta for the interval #794

  • Removed

    • Session.cal_adc_input attribute and Session.enums.CalADCInput enum - External Cal not supported in Python
    • Session constructor channel parameter can now use any channel format that repeated capabilities can use #807

• NI-SCOPE

  • Changed

    • Session.fetch(), Session.read() and Session.fetch_into() updated
      • Takes additional parameters that modify fetch behavior
      • Add resulting record as part of the waveform info
      • Channel name and record number added to waveform info
      • See documentation for fetch,
        read,
        and fetch_into for more details.
    • Rename wfm parameter to waveform in fetch() and fetch_into()
    • Enum values and attribute names that start with an underscore + digit have been renamed
      • Session._5102_adjust_pretrigger_samples --> Session.adjust_pretrigger_samples_5102
      • Session._5v_out_output_terminal --> Session.five_v_out_output_terminal
      • ExportableSignals._5V_OUT --> ExportableSignals.FIVE_V_OUT
      • FlexFIRAntialiasFilterType._48_TAP_STANDARD --> FlexFIRAntialiasFilterType.FOURTYEIGHT_TAP_STANDARD
      • FlexFIRAntialiasFilterType._48_TAP_HANNING --> FlexFIRAntialiasFilterType.FOURTYEIGHT_TAP_HANNING
      • FlexFIRAntialiasFilterType._16_TAP_HANNING --> FlexFIRAntialiasFilterType.SIXTEEN_TAP_HANNING
      • FlexFIRAntialiasFilterType._8_TAP_HANNING --> FlexFIRAntialiasFilterType.EIGHT_TAP_HANNING
      • VideoSignalFormat._480I_59_94_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_480I_59_94_FIELDS_PER_SECOND
      • VideoSignalFormat._480I_60_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_480I_60_FIELDS_PER_SECOND
      • VideoSignalFormat._480P_59_94_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_480P_59_94_FRAMES_PER_SECOND
      • VideoSignalFormat._480P_60_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_480P_60_FRAMES_PER_SECOND
      • VideoSignalFormat._576I_50_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_576I_50_FIELDS_PER_SECOND
      • VideoSignalFormat._576P_50_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_576P_50_FRAMES_PER_SECOND
      • VideoSignalFormat._720P_50_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_720P_50_FRAMES_PER_SECOND
      • VideoSignalFormat._720P_59_94_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_720P_59_94_FRAMES_PER_SECOND
      • VideoSignalFormat._720P_60_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_720P_60_FRAMES_PER_SECOND
      • VideoSignalFormat._1080I_50_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_1080I_50_FIELDS_PER_SECOND
      • VideoSignalFormat._1080I_59_94_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_1080I_59_94_FIELDS_PER_SECOND
      • VideoSignalFormat._1080I_60_FIELDS_PER_SECOND --> VideoSignalFormat.VIDEO_1080I_60_FIELDS_PER_SECOND
      • VideoSignalFormat._1080P_24_FRAMES_PER_SECOND --> VideoSignalFormat.VIDEO_1080P_24_FRAMES_PER_SECOND
    • Session.cal_self_calibration() renamed to Session.self_cal() to match other drivers - issue #615

  • Removed

    • Following properties are now removed (use parameters to fetch calls):
      • fetch_relative_to
      • fetch_offset
      • fetch_record_number
      • fetch_num_records
    • Removed number_of_coefficients parameter from get_equalization_filter_coefficients()
    • Removed Measurement Library waveform methods and properties - issue #809
      • actual_meas_wfm_size()
      • add_waveform_processing()
      • clear_waveform_processing()
      • fetch_array_measurement()
      • clear_waveform_measurement_stats()
      • fetch_measurement()
      • fetch_measurement_stats()
      • read_measurement()
      • configure_ref_levels()
      • meas_ref_level_units
      • meas_other_channel
      • meas_hysteresis_percent
      • meas_last_acq_histogram_size
      • meas_voltage_histogram_size
      • meas_voltage_histogram_low_volts
      • meas_voltage_histogram_high_volts
      • meas_time_histogram_size
      • meas_time_histogram_low_volts
      • meas_time_histogram_high_volts
      • meas_time_histogram_low_time
      • meas_time_histogram_high_time
      • meas_polynomial_interpolation_order
      • meas_interpolation_sampling_factor
      • meas_filter_cutoff_freq
      • meas_filter_center_freq
      • meas_filter_ripple
      • meas_filter_transient_waveform_percent
      • meas_filter_type
      • meas_filter_order
      • meas_filter_taps
      • meas_chan_low_ref_level
      • meas_chan_mid_ref_level
      • meas_chan_high_ref_level
      • meas_filter_width
      • meas_fir_filter_window
      • meas_array_gain
      • meas_array_offset
      • meas_percentage_method
      • fetch_meas_num_samples

API Clean up - multiple source breakers

• ALL

  • Changed

    • Option string can now be a python dictionary instead of a string. (Fix #661)
      • Key/Value pairs approporiate for desired behavior

        session = nidmm.Session('Dev1', False, {'simulate': True, 'driver_setup': {'Model': '4071', 'BoardType': 'PXI'}})

    • Repeated capabilities are handled differently. See #737 for discussion
    • All function parameters or attributes that represent time now use datetime.timedelta(). See #659 for discussion
    • All functions that return calibration dates now return datetime.datetime(). See #659 for discussion

• NI-DMM

  • Changed

    • nidmm.Session() no longer takes id_query parameter (Fix #670)
    • The following functions timeout or delay parameter now is required to be a datetime.timedelta() object:
      • configure_multi_point()
      • configure_trigger()
      • fetch()
      • fetch_multi_point()
      • fetch_waveform()
      • read()
      • read_multi_point()
      • read_waveform()
    • The following functions return a datetime.datetime() object representing the date and time
      • get_cal_date_and_time()
    • Metadata updated to NI-DMM 17.5

  • Removed

    • Removed these enums and disconnected them from the associated attribute (Fix #666)
      • DCBias - DC_BIAS
      • OffsetCompensatedOhms - OFFSET_COMP_OHMS

• NI-Switch

  • Changed

    • The following functions timeout, delay or holdoff parameters now is required to be a datetime.timedelta() object:
      • configure_scan_trigger()
      • wait_for_debounce()
      • wait_for_scan_complete()

• NI-DCPower

  • Added

    • channel repeated capability - See #737 for discussion

  • Changed

    • Metadata updated to NI-DCPower 17.6.1
    • The following functions timeout parameter now is required to be a datetime.timedelta() object:
      • fetch_multiple()
      • wait_for_event()
    • The following functions return a datetime.datetime() object representing the date and time
      • get_ext_cal_last_date_and_time()
      • get_self_cal_last_date_and_time()

  • Removed

    • Removed these enums and disconnected them from the associated attribute (Fix #666)
      • CurrentLimitAutorange - CURRENT_LIMIT_AUTORANGE
      • CurrentLevelAutorange - CURRENT_LEVEL_AUTORANGE
      • VoltageLevelAutorange - VOLTAGE_LEVEL_AUTORANGE
      • VoltageLimitAutorange - VOLTAGE_LIMIT_AUTORANGE

• NI-FGEN

  • Changed

    • Repeated capablilites - See #737 for discussion:
      • channel repeated capability
      • markers repeated capability
      • script_triggers repeated capability
    • The following functions timeout parameter now is required to be a datetime.timedelta() object:
      • adjust_sample_clock_relative_delay()
      • wait_until_done()
    • The following functions return a datetime.datetime() object representing the date and time
      • get_ext_cal_last_date_and_time()
      • get_self_cal_last_date_and_time()

• NI-SCOPE

  • Added

    • Repeated capablilites - See #737 for discussion:
      • channel repeated capability

  • Changed

    • niscope.Session() no longer takes id_query parameter (Fix #670)
    • The following functions timeout, delay or holdoff parameters now is required to be a datetime.timedelta() object:
      • configure_trigger_digital()
      • configure_trigger_edge()
      • configure_trigger_hysteresis()
      • configure_trigger_software()
      • configure_trigger_video()
      • configure_trigger_window()
      • fetch()
      • fetch_measurement_stats()
      • read()

  • Removed

    • Removed these enums and disconnected them from the associated attribute (Fix #666)
      • BoolEnableDisable - P2P_ENABLED, P2P_ADVANCED_ATTRIBUTES_ENABLED, P2P_ONBOARD_MEMORY_ENABLED
      • BoolEnableDisableChan - CHANNEL_ENABLED
      • BoolEnableDisableIQ - FETCH_INTERLEAVED_IQ_DATA
      • BoolEnableDisableRealtime - HORZ_ENFORCE_REALTIME
      • BoolEnableDisableTIS - ENABLE_TIME_INTERLEAVED_SAMPLING

nimi-python 0.6 release (numpy support)

• ALL

  • Added

    • abort. See #660.

• NI-DMM

  • Added

    • fetch_waveform_into for high-performance fetch using numpy.array of float64.

  • Changed

    • Property powerline_freq no longer uses enum PowerlineFrequency.
    • Property current_source no longer uses enum CurrentSource.
    • Property input_resistance no longer uses enum InputResistance.
    • Removed actual_number_of_points from fetch_waveform() returned tuple
    • Removed actual_number_of_points from fetch_multi_point() returned tuple
    • Removed actual_number_of_points from read_multi_point() returned tuple
    • Removed actual_number_of_points from read_waveform() returned tuple

• NI-Switch

  • Removed

    • Removed init_with_topology. Clients should use niswitch.Session constructor. See #660.

• NI-DCPower

  • Changed

    • Property power_line_frequency no longer uses enum PowerLineFrequency.
    • Removed actual_count from fetch_multiple() returned tuple

• NI-FGEN

  • Added

    • Support for calling write_waveform using list (float) or numpy.array (int16 or float64)
    • Support for calling write_waveform with a waveform handle (int) or a name (str).
    • Support for calling create_waveform using list (float) or numpy.array (int16 or float64)

  • Changed

    • Renamed create_waveform_f64 -> create_waveform

  • Removed

    • create_waveform_i16
    • write_binary16_waveform: Use write_waveform
    • write_named_waveform_i16: Use write_waveform
    • write_named_waveform_f64: Use write_waveform

• NI-SCOPE

  • Added

    • fetch_into for high-performance fetch using numpy.array. Supported element types:
      • numpy.float64
      • numpy.int8
      • numpy.int16
      • numpy.int32

  • Changed

    • Added default values for timeout on all fetch and read functions.
    • Property input_impedance no longer uses enum InputImpedance.

  • Removed

    • AddWaveformProcessing - See #667 for rationale
    • ClearWaveformProcessing - See #667 for rationale
    • FetchArrayMeasurement - See #667 for rationale

nimi-python 0.5 release (NI-SCOPE)

• ALL

  • Removed

    • enum definitions that are not referenced by a function and/or an attributes

• NI-DMM

  • Added

    • get_ext_cal_recommended_interval()

• NI-DCPower

  • Added

    • get_ext_cal_last_date_and_time()
    • get_ext_cal_last_temp()
    • get_ext_cal_recommended_interval()

• NI-FGEN

  • Removed

    • adjust_sample_clock_relative_delay()

• NI-SCOPE

  • Added

    • Initial release

  • Removed

    • Removed Peer to Peer attributes

nimi-python 0.4 release (NI-FGEN)

• ALL

  • Changed

    • Simplified examples by removing try/except
    • SOURCE BREAKER: Changed names of enum value names to correspond to C #defines

• NI-DMM

  • Changed

    • Removed incorrect leading underscore from some enum values:
      • Function.AC_VOLTS_DC_COUPLED
      • Function.WAVEFORM_CURRENT
      • MeasurementCompleteDest.LBR_TRIG_0
      • OperationMode.IVIDMM_MODE
      • SampleTrigger.EXTERNAL
      • SampleTrigger.TTL_3
      • TriggerSource.TTL_0
      • TriggerSource.TTL_3
      • TriggerSource.TTL_7
      • TriggerSource.PXI_STAR

• NI-Switch

  • Removed

    • Support for is_debounced and is_scanning functions. Instead use the attribute of the same name.

• NI-DCPower

  • Added

    • New example nidcpower_advanced_sequence.py

  • Changed

    • Fixed method signature for:
      • wait_for_event
      • create_sequence
      • create_advanced_sequence

  • Removed

    • Support for measure_multiple until issue #444 is addressed.

• NI-FGEN

  • Added

    • Initial release

nimi-python 0.3 release (NI-DCPower)

[0.3.0] - 2017-10-13

• ALL

  • Added

    • Support for ViInt64 (64-bit integers)

  • Changed

    • Modified how methods with repeated capabilities are invoked. There's no longer (for example) a "channel_name" input. Instead:

      # Sets sequence on channels 0 through 3
      session['0-3'].set_sequence(values, source_delays)

    • Enum value documentation lists the fully qualified name - this is to allow easy copy/paste

• NI-DMM

  • Changed

    • Added default values to some parameters.

  • Removed

    • Removed methods that aren’t useful in the Python bindings.

• NI-SWITCH

  • Changed

    • Added default values to some parameters.

  • Removed

    • Removed methods that aren’t useful in the Python bindings.

• NI-DCPower

  • Added

    • Initial release

nimi-python 0.2 release (NI-SWITCH)

• ALL

  • Added

    • Suport for channel-based properties

  • Changed

    • Warnings no longer raise an exception
      • Warnings are now added to warnings.warn()

• NI-DMM

  • Changed

    • Added support for enums with types other than ViInt32 (Fixes #330)

• NI-ModInst

  • Changed

    • Device index is now on session not attribute. The correct way is now

      i = 0
      with nimodinst.Session('nidmm') as session:
          name = session[i].device_name

• NI-SWITCH

  • Added

    • Initial Release