This will briefly describe the steps needed to get going on various types of systems.
The build-related tools are acquired through the following packages:
$ pacman -Sy base-devel arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-gdb arm-none-eabi-newlib stlink python
Both openocd and srecord must be install thru the AUR
(Arch User Repository). Either use a AUR helper like paru or yay or
built it manually.
$ paru -S openocd-git srecord
$ yay -S openocd-git srecord
- Clone AUR openocd-git repo:
$ git clone https://aur.archlinux.org/openocd-git $ cd openocd-git- Build and install Arch Linux package:
$ makepkg -si
The packages needed for Debian are as follow:
$ sudo apt install autoconf automake gcc-arm-none-eabi gdb-multiarch git libcapstone4 libftdi1-2 libgpiod2 libhidapi-hidraw0 libtool libusb-1.0-0 libusb-1.0-0-dev make pkg-config python3 srecord stlink-tools tcl xxd
OpenOCD can be built as follow:
$ git clone https://git.code.sf.net/p/openocd/code openocd$ cd openocd$ ./bootstrap$ ./configure --prefix=/usr --disable-werror --enable-stlink$ make$ sudo make install