0x45 and 0x46 are, for the best part, to manage when the radio is in the foreground, and to a lesser extent, how it behaves in the foreground.
The need for this is a function of how how the GT UI came to be, which was by shoehorning an aftermarket standalone navigation system into what I'd argue was BMW's first in-vehicle infotainment (IVI) system, while avoiding change how anything else worked!
Look familiar?
This is a byproduct of the GT UI needing to remain backwards compatible with radios. This is somewhat apparent in the design of the original BMBT.
When first presented with the BMBT, I couldn't figure out how to turn the radio on. There's two metaphores.
The need for arbitration is a result of heretounforeseen resource contention. The radio no longer had a dedicated display
--
| Module | Variant | Note | Command | Argument |
|---|---|---|---|---|
| GT | MK1 | Ignition | 45 |
0b0000_0000 |
| GT | MK1 | Menu | 45 |
0b0000_0001 |
| GT | MK1 | Audio OBC | 45 |
0b0000_0011 |
| GT | VM | Ignition | 45 |
0b0000_0000 |
| GT | VM | Ignition | 46 |
0b0000_0001 |
| Module | Variant | Note | Command | Argument |
|---|---|---|---|---|
| Radio | C23 | Hide Overlay | 46 |
0b0000_1110 |
| Radio | C23 | Menu (Reply?) | 46 |
0b0000_0001 |
| Radio | C23 | Hide Tone | 46 |
0b0000_1000 |
| Radio | C23 | Hide Select | 46 |
0b0000_0100 |
| Radio | C23 | Turn Off | 46 |
0b0000_1110 |
bmbt glo_l PONG status: 0x30
tv glo_h PONG status: 0x01 (Announce)
# enter announce/ignition loop... x5
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
bmbt glo_l PONG status: 0x31
# then Vid. GT comes to party...
gt glo_l PONG status: 0x41
# which causes another igntion
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
# which it's then a normal announce
gt glo_l PONG status: 0x40
gt rad SRC-SND 00 00
# setup code, limit, timer, date time, OBC....
gt rad UI-GT config: 00 ((0000 0000) )
bmbt glo_l PONG status: 0x31
# lots of ignition etc
gt glo_l PONG status: 0x41 (3B/7F -> BF [Announce])
rad glo_h PONG status: 0x01 (Announce)
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0x48 ((Tape) Stop)
# stuff doing it's thing
rad bmbt RAD-LED led: 0x48 ((Tape) Stop)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
# another ignition so BMBT announces again...
tv glo_h PONG status: 0x01 (Announce)
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
bmbt glo_l PONG status: 0x31
rad bmbt RAD-LED led: 00 ((LED) Off)
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
# GT sets it's up again...
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# then we go into BAU
bmbt rad PING
rad glo_h PONG status: 00 (Reply)
bmbt rad PING
rad glo_h PONG status: 00 (Reply)
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 00 ((LED) Off)
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x12 (Tape / (1/A) ▶︎)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
rad bmbt RAD-LED led: 0x48 ((Tape) Stop)
rad bmbt RAD-LED led: 0x48 ((Tape) Stop)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
# KL-30
# nada!
# KL-R
rad glo_h PONG status: 0x01 (Announce)
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
gt rad SRC-SND 00 00
rad bmbt RAD-LED led: 0xff ((LED) On)
gt rad UI-GT config: 00 ((0000 0000) )
# radio writes as requested
rad gt RAD-23 gt: 0x40 ((Radio) Set Station) / ike: 0x20 (Reset) / chars: 46 4D 20 03 31 30 35 2E 31 04 20 20 20 ("FM ☐105.1☐ ")
rad gt RAD-21* layout: 0x41 ([Radio] Presets) / m2: 0x05 ((0000 0101) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): P5) / m3: 0x60 ((0110 0000) Block: [ON], Flush: [ON], index: "0") / chars: 20 41 31 05 41 32 20 05 20 41 33 05 41 34 20 05 2A 41 35 05 41 36 20 (" A1☐A2 ☐ A3☐A4 ☐*A5☐A6 ")
rad gt RAD-21* layout: 0x43 ([Radio] Source) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x06 ((0000 0110) index: "6") / chars: 46 4D 05 41 4D 05 53 43 05 20 20 05 54 41 50 45 05 20 20 20 ("FM☐AM☐SC☐ ☐TAPE☐ ")
# Tone
bmbt rad BMBT-RAD* 0x04 (0000 0100) :bmbt_tone [Tone] Press
bmbt rad BMBT-RAD* 0x84 (1000 0100) :bmbt_tone [Tone] Release
rad gt RAD-ALT mode: 0x80 ((Tone) EQ. Set) / opts: 00 00 10 ( 16 )
rad gt UI-RAD state: 0x08 ((0000 1000) Hide: Tone)
# Enable Audio OBC
gt rad UI-GT config: 0x03 ((0000 0011) Audio+OBC (MK1/TV): [ON], Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# hide overlay (radio on)
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
brad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
# radio off
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 00 ((LED) Off)
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
# Disable Audio OBC
bmbt gt BMBT-GT* 0x05 (0000 0101) :bmbt_confirm [Confirm] Press
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
bmbt gt BMBT-GT* 0x85 (1000 0101) :bmbt_confirm [Confirm] Release
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# Enable Audio OBC (radio on)
gt rad UI-GT config: 0x03 ((0000 0011) Audio+OBC (MK1/TV): [ON], Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
gt rad SRC-SND 00 00
bmbt glo_l PONG status: 0x31
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
gt glo_h PONG status: 0x11
tv glo_h PONG status: 0x01 (Announce)
tv bmbt PING --
bmbt tv PONG status: 0x30
# usual stuff then...
gt rad SRC-SND 00 00
# switch LC to correct mode...
tv bmbt TV-BMBT* a: 0x12 ((0001 0010) Power: [ON], Source: [Vid. GT]) / b: 0x11 ((0001 0001) Aspect Ratio: [16:9], Encoding: [NTSC])
# familiar
bmbt glo_l PONG status: 0x31
gt glo_h PONG status: 0x11 (3B -> FF [Announce])
tv glo_h PONG status: 0x01 (Announce)
tv bmbt PING
bmbt tv PONG status: 0x30 (F0 -> 3B [Reply])
# lots of set up OBC etc...
# GT kicks in
gt bmbt GT-BMBT* a: 0x12 ((0001 0010) Power: [ON], Source: [Vid. GT])
# then tries to get radio... (bmbt pinging int he mean time)
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
bmbt rad PING --
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
bmbt rad PING --
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
bmbt rad PING --
# Regardless of radio state
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
gt bmbt GT-BMBT* a: 0x02 ((0000 0010) Power: [OFF], Source: [Vid. GT])
remove battery.. plug radio in..
# we know this...
gt rad SRC-SND 00 00
# lots of OBC, date tie stuff... and as above..
rad glo_h PONG status: 0x01 (Announce)
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0x48 ((Tape) Stop)
# similar to no radio.. GT eventually kicks in
gt bmbt GT-BMBT* a: 0x12 ((0001 0010) Power: [ON], Source: [Vid. GT])
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# then alive loop begins...
# pretty similr stuff
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 0xff ((LED) On)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
# UI
rad gt RAD-23 gt: 0x40 ((Radio) Set Station) / ike: 0x20 (Reset) / chars: 46 4D 20 03 31 30 35 2E 31 04 20 20 20 ("FM ☐105.1☐ ")
rad gt RAD-21* layout: 0x41 ([Radio] Presets) / m2: 0x05 ((0000 0101) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): P5) / m3: 0x60 ((0110 0000) Block: [ON], Flush: [ON], index: "0") / chars: 20 41 31 05 41 32 20 05 20 41 33 05 41 34 20 05 2A 41 35 05 41 36 20 (" A1☐A2 ☐ A3☐A4 ☐*A5☐A6 ")
rad gt RAD-21* layout: 0x43 ([Radio] Source) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x06 ((0000 0110) index: "6") / chars: 46 4D 05 41 4D 05 53 43 05 20 20 05 54 41 50 45 05 20 20 20 ("FM☐AM☐SC☐ ☐TAPE☐ ")
rad gt RAD-21* layout: 0x41 ([Radio] Presets) / m2: 0x05 ((0000 0101) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): P5) / m3: 0x60 ((0110 0000) Block: [ON], Flush: [ON], index: "0") / chars: 20 41 31 05 41 32 20 05 20 41 33 05 41 34 20 05 2A 41 35 05 41 36 20 (" A1☐A2 ☐ A3☐A4 ☐*A5☐A6 ")
rad gt RAD-21* layout: 0x43 ([Radio] Source) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x06 ((0000 0110) index: "6") / chars: 46 4D 05 41 4D 05 53 43 05 20 20 05 54 41 50 45 05 20 20 20 ("FM☐AM☐SC☐ ☐TAPE☐ ")
# then into BAU...
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 00 ((LED) Off)
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
# Nada, like before!
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0xff ((LED) On)
gt rad UI-GT config: 00 ((0000 0000) )
rad gt RAD-23 gt: 0x40 ((Radio) Set Station) / ike: 0x20 (Reset) / chars: 46 4D 20 03 31 30 35 2E 31 04 20 20 20 ("FM ☐105.1☐ ")
rad gt RAD-21* layout: 0x41 ([Radio] Presets) / m2: 0x05 ((0000 0101) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): P5) / m3: 0x60 ((0110 0000) Block: [ON], Flush: [ON], index: "0") / chars: 20 41 31 05 41 32 20 05 20 41 33 05 41 34 20 05 2A 41 35 05 41 36 20 (" A1☐A2 ☐ A3☐A4 ☐*A5☐A6 ")
rad gt RAD-21* layout: 0x43 ([Radio] Source) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x06 ((0000 0110) index: "6") / chars: 46 4D 05 41 4D 05 53 43 05 20 20 05 54 41 50 45 05 20 20 20 ("FM☐AM☐SC☐ ☐TAPE☐ ")
# radio on, hit MENU
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# enable Audio + OBC (radio doesn't display)
gt rad UI-GT config: 0x03 ((0000 0011) Audio+OBC (MK1/TV): [ON], Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# show overlay, then hide it
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt UI-RAD state: 0x0e ((0000 1110) Hide: Menu, Hide Header: [ON])
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
# show then MENU
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
gt rad UI-GT config: 0x03 ((0000 0011) Audio+OBC (MK1/TV): [ON], Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
# show then ignition off
# nothing!
# ignition back on (audio obc enabled of course...)
rad glo_h PONG status: 0x01 (Announce)
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0xff ((LED) On)
# as expected...
gt rad UI-GT config: 0x02 ((0000 0010) Audio+OBC (MK1/TV): [ON])
# and radio draws...
rad gt RAD-23 gt: 0x40 ((Radio) Set Station) / ike: 0x20 (Reset) / chars: 46 4D 20 03 31 30 35 2E 31 04 20 20 20 ("FM ☐105.1☐ ")
rad gt RAD-21* layout: 0x41 ([Radio] Presets) / m2: 0x05 ((0000 0101) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): P5) / m3: 0x60 ((0110 0000) Block: [ON], Flush: [ON], index: "0") / chars: 20 41 31 05 41 32 20 05 20 41 33 05 41 34 20 05 2A 41 35 05 41 36 20 (" A1☐A2 ☐ A3☐A4 ☐*A5☐A6 ")
rad gt RAD-21* layout: 0x43 ([Radio] Source) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x06 ((0000 0110) index: "6") / chars: 46 4D 05 41 4D 05 53 43 05 20 20 05 54 41 50 45 05 20 20 20 ("FM☐AM☐SC☐ ☐TAPE☐ ")
rad glo_l PONG status: 0x01 (Announce)
rad bmbt RAD-LED led: 00 ((LED) Off)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
# Radio Off
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# BM53 doesn't seem to write at power on?
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
rad cd CDC-REQ control: 00 (Status!) / mode: 00 (mode: "00")
rad cdc CDC-REQ control: 00 (Status!) / mode: 00 (mode: "00")
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x81 (Tape / Dolby Off)
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x81 (Tape / Dolby Off)
rad bmbt RAD-LED led: 0xff ((LED) On)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x41 ((0100 0001) Block: [ON], Zone: A/1) / chars: 20 46 4D 41 20 (" FMA ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 20 50 20 32 20 (" P 2 ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 20 20 20 20 20 (" ")
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 20 20 52 44 53 20 20 (" RDS ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x07 ((0000 0111) Zone: H3/7) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 39 04 20 20 20 20 20 20 ("☐101.9☐ ")
gt rad TXT-CACHE status: 00 (status: "00")
# BM53 will use "new" bitfield combination (presumably due to no menus)
rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
# At this point.. still only:
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt UI-RAD state: 0x02 ((0000 0010) Hide: --, Hide Header: [ON])
rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
# still nothing like 0x10 yet..
rad bmbt RAD-LED led: 00 ((LED) Off)
rad gt UI-RAD state: 0x02 ((0000 0010) Hide: --, Hide Header: [ON])
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# Nada!
# As before...
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# Radio On
bmbt rad BMBT-RAD* 0x06 (0000 0110) :bmbt_power [Power] Press
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x81 (Tape / Dolby Off)
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x81 (Tape / Dolby Off)
bmbt rad BMBT-RAD* 0x86 (1000 0110) :bmbt_power [Power] Release
rad bmbt RAD-LED led: 0xff ((LED) On)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
# Overlay
bmbt rad BMBT-RAD* 0x30 (0011 0000) :bmbt_overlay [Overlay] Press
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x41 ((0100 0001) Block: [ON], Zone: A/1) / chars: 20 46 4D 41 20 (" FMA ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 20 20 52 44 53 20 20 (" RDS ")
bmbt rad BMBT-RAD* 0xb0 (1011 0000) :bmbt_overlay [Overlay] Release
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x07 ((0000 0111) Zone: H3/7) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
gt rad TXT-CACHE status: 00 (status: "00")
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 20 38 37 2E 37 04 20 20 20 20 20 20 ("☐ 87.7☐ ")
rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
# Ignition Off
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
gt nav_jp SRC-NAV_JP* 02
gt bmbt GT-BMBT* a: 0x02 ((0000 0010) Power: [OFF], Source: [Vid. GT])
rad bmbt RAD-LED led: 00 ((LED) Off)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
rad gt UI-RAD state: 0x02 ((0000 0010) Hide: --, Hide Header: [ON])
# Ignition On
rad bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
rad bmbt RAD-LED led: 0x5f ((Tape) Dolby OFF)
rad bmbt RAD-LED led: 0xff ((LED) On)
bmbt rad TAPE control: 0x06 (Tape) / mode: 0x30 (Tape / Stopped)
gt bmbt GT-BMBT* a: 0x12 ((0001 0010) Power: [ON], Source: [Vid. GT])
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
I wonder if this is due to no date/time being set? Won't let Radio draw at KL-R?
# Exit Settings via Menu
gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# No defaults to home screen
# No radio change...
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# Radio On
# Overlay On
# Overlay Off
# Overlay On
# Radio Off
# FM Band FMA, FM1, FM2
# Change presets
# Menu
# Still nothing....
# Mode: Tape
# Overlay Off
# Overlay On
# Menu
# Nup, still he same...
21:51:36 [INFO ] [ virtual] [ Display] bmbt rad BMBT-RAD* 0x04 (0000 0100) :bmbt_tone [Tone] Press
21:51:36 [INFO ] [ virtual] [ Display] bmbt rad BMBT-RAD* 0x84 (1000 0100) :bmbt_tone [Tone] Release
21:51:36 [INFO ] [ virtual] [ Display] rad gt RAD-ALT mode: 0x86 ((Tone) EQ. Set) / opts: 06 15 13 ( 398611 )
21:51:37 [INFO ] [ virtual] [ Display] gt ike PING --
21:51:37 [INFO ] [ virtual] [ Display] gt tel PING --
21:51:37 [INFO ] [ virtual] [ Display] ike glo_l PONG status: 00 (Reply)
21:51:37 [INFO ] [ virtual] [ Display] tel glo_h PONG status: 0x30 (BMBT (Wide)/Tel (Motorola) -> 3B [Reply])
21:51:37 [INFO ] [ virtual] [ Display] ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
21:51:37 [INFO ] [ virtual] [ Display] ike anzv ANZV-BOOL-IKE control_a: 00 ((0000 0000) (Settings) Memo: [OFF], (OBC) Timer: [OFF], (OBC) Limit: [OFF]) / control_b: 00 ((0000 0000) (Code) Lock: [OFF], (Aux.) Heating: [OFF], (Aux.) Timer 2: [OFF], (Aux.) Vent.: [OFF], (Aux.) Timer 1: [OFF])
21:51:39 [INFO ] [ virtual] [ Display] rad dsp PING --
21:51:40 [INFO ] [ virtual] [ Display] bmbt rad PING --
21:51:40 [INFO ] [ virtual] [ Display] rad glo_l PONG status: 00 (Reply)
21:51:44 [INFO ] [ virtual] [ Display] rad gt UI-RAD state: 0x08 ((0000 1000) Hide: Tone)
21:51:44 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x41 ((0100 0001) Block: [ON], Zone: A/1) / chars: 20 46 4D 41 20 (" FMA ")
21:51:44 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 20 50 20 31 20 (" P 1 ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 20 20 20 20 20 (" ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 20 20 20 20 20 (" ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 20 20 52 44 53 20 20 (" RDS ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x07 ((0000 0111) Zone: H3/7) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
21:51:45 [INFO ] [ virtual] [ Display] rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 31 04 20 20 20 20 20 20 ("☐101.1☐ ")
21:51:45 [INFO ] [ virtual] [ Display] gt rad TXT-CACHE status: 00 (status: "00")
21:51:45 [INFO ] [ virtual] [ Display] rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
# Hit Menu... still nothing...
21:52:18 [INFO ] [ virtual] [ Display] bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
21:52:18 [WARN ] [ tel] [ Telephone::Emulated] Menu pressed! @layout -> :background
21:52:18 [INFO ] [ virtual] [ Display] bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
21:52:18 [INFO ] [ virtual] [ Display] gt rad UI-GT config: 0x01 ((0000 0001) Main Menu: [ON])
21:52:18 [INFO ] [ virtual] [ Display] rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
21:52:19 [INFO ] [ virtual] [ Display] rad dsp PING --
rad gt UI-RAD state: 0x04 ((0000 0100) Hide: Select)
bmbt glo_h BMBT-SOFT 0x0f (0000 1111) :bmbt_soft_select [Select] Press
rad gt RAD-ALT mode: 0x04 ((Select) "m" Manual Staion Choice) / opts: ( 0 )
bmbt glo_h BMBT-SOFT 0x8f (1000 1111) :bmbt_soft_select [Select] Release
bmbt gt BMBT-GT* 0x05 (0000 0101) :bmbt_confirm [Confirm] Press
bmbt gt BMBT-GT* 0x85 (1000 0101) :bmbt_confirm [Confirm] Release
rad gt RAD-ALT mode: 0x05 ((Select) "< m >" Manual Staion Choice [Selected]) / opts: ( 0 )
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x03 ((0000 0011) Zone: C/3) / chars: 20 20 6D 20 20 (" m ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
bmbt gt BMBT-NAV 0x81 (1000 0001) :bmbt_right Right: 1
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 33 04 20 20 20 20 20 20 ("☐101.3☐ ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x02 ((0000 0010) Zone: B/2) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
bmbt gt BMBT-NAV 0x81 (1000 0001) :bmbt_right Right: 1
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 35 04 20 20 20 20 20 20 ("☐101.5☐ ")
bmbt gt BMBT-NAV 0x81 (1000 0001) :bmbt_right Right: 1
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 37 04 20 20 20 20 20 20 ("☐101.7☐ ")
bmbt gt BMBT-NAV 0x81 (1000 0001) :bmbt_right Right: 1
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 39 04 20 20 20 20 20 20 ("☐101.9☐ ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x02 ((0000 0010) Zone: B/2) / chars: 20 50 20 32 20 (" P 2 ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
bmbt gt BMBT-GT* 0x05 (0000 0101) :bmbt_confirm [Confirm] Press
bmbt gt BMBT-GT* 0x85 (1000 0101) :bmbt_confirm [Confirm] Release
rad gt RAD-ALT mode: 0x04 ((Select) "m" Manual Staion Choice) / opts: ( 0 )
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x03 ((0000 0011) Zone: C/3) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
rad gt UI-RAD state: 0x04 ((0000 0100) Hide: Select)
As long as Menu has not been pressed in the time since radio was off, thus not having radio send 0x46 0x01, when it is next turned on, it will be displayed.
Which interestinly, is enforced by the radio, which doesn't actually send any text when powered on. Presumably 0x46 0x01 is in radio state, and it won't draw until "overlay" is requested.
bmbt glo_h BMBT-SOFT 0x38 (0011 1000) :bmbt_soft_info [Info] Press
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x41 ((0100 0001) Block: [ON], Zone: A/1) / chars: 20 46 4D 41 20 (" FMA ")
bmbt glo_h BMBT-SOFT 0xb8 (1011 1000) :bmbt_soft_info [Info] Release
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 20 50 20 32 20 (" P 2 ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 20 20 52 44 53 20 20 (" RDS ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x07 ((0000 0111) Zone: H3/7) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 39 04 20 20 20 20 20 20 ("☐101.9☐ ")
# Info Menu
rad gt RAD-21* layout: 0x60 ([Digital] Menu A) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x40 ((0100 0000) Block: [ON], index: "0") / chars: 50 54 59 20 20 20 20 20 20 20 20 20 20 2A 06 ("PTY *☐")
rad gt RAD-21* layout: 0x60 ([Digital] Menu A) / m2: 00 ((0000 0000) Band (0x43): FMA, Preset (0x41), Dolby: (0x83): No Preset) / m3: 0x01 ((0000 0001) index: "1") / chars: 52 44 53 20 20 20 20 20 20 20 20 20 20 2A 06 06 06 06 06 06 06 06 06 ("RDS *☐☐☐☐☐☐☐☐☐")
rad gt RAD-A5* layout: 0x60 (Menu A) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
# Header
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x41 ((0100 0001) Block: [ON], Zone: A/1) / chars: 20 46 4D 41 20 (" FMA ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 20 50 20 32 20 (" P 2 ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 20 20 52 44 53 20 20 (" RDS ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x07 ((0000 0111) Zone: H3/7) / chars: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 (" ")
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 03 31 30 31 2E 39 04 20 20 20 20 20 20 ("☐101.9☐ ")
# Timeout, hide menu.
rad gt UI-RAD state: 0x0c ((0000 1100) Hide: Menu)
Still no change...
# Whoops.. I don't have block in generate...?
# I'll try Menu now...
# Radio overlay on, then off, radio off/on.. still no change...
# Fix menu generate.. okay, fixed..
# generate menu 0x60 (no header...)
# hit menu.. nothing!
# overlay on...
# try again menu.. (also no header..)
# select multiple presets...
# still nothing...
# trying menu 0x61
# change preset
# menu: same again
# overlay back on
# redraw.. change preset...
# try header...0xa5
# hit menu..
# nada..
# full retard with wilhelm...
# nothing...
Emulation: No TV, or DSP
gt rad UI-GT config: 00 ((0000 0000) )
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
gt glo_l PONG status: 0x41 (Navi. GT (MK1/4) -> BF [Announce])
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
rad glo_h PONG status: 0x01 (Announce)
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
ike glo_l IGN position: 0x03 (Ignition: KL-15 (Pos. II))
gt glo_l PONG status: 0x40 (Navi. GT (MK1/4) -> BF [Reply])
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0))
nav rad PONG status: 0x01 (Announce),
gt glo_l PONG status: 0x41 (Navi. GT (MK1/4) -> BF [Announce]),
gt ike IGN-REQ --,
gt ike REGION-GT?--,
gt ike CONF-BOOL field: 0x01 ((Settings) Time) / control: 0x01 (Variable Request (0x24)),
gt ike CONF-BOOL field: 0x02 ((Settings) Date) / control: 0x01 (Variable Request (0x24)),
ike glo_l REGION lang: 0x08 (Unknown?) / b2: 0x81 ((1000 0001) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42"),
ike anzv ANZV-VAR-IKE* field: 0x01 ((Settings) Time) / ike: 00 (--) / chars: 2D 2D 3A 2D 2D 20 20 ("--:-- "),
ike anzv ANZV-VAR-IKE* field: 0x02 ((Settings) Date) / ike: 00 (--) / chars: 2D 2D 2F 2D 2D 2F 32 30 31 39 ("--/--/2019"),
nav glo_l PONG status: 0xc1 (7F -> BF (Guidance Active) [Announce]),
ike glo_l IGN position: 00 (Ignition: KL-30 (Pos. 0)),
# some messages removed for brevity...
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I)),
gt glo_l PONG status: 0x40 (Navi. GT (MK1/4) -> BF [Reply])
gt rad SRC-SND 00 00
gt cid PING --
gt nav_jp SRC-NAV_JP* 02 00
gt bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
gt dsp DSP-SET mode: 0x28 (Demo Off) / adjustment: 00 ((0000 0000) Band: 80hz, ±: +, magnitude: "0")
nav rad TMC-REQ 1F 00,
nav rad TMC-REQ 3F 00,
gt ike REGION-SET lang: 0x01 (GB) / b2: 0x85 ((1000 0101) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42"),
nav rad PONG status: 0x01 (Announce),
gt glo_l PONG status: 0x41 (Navi. GT (MK1/4) -> BF [Announce]),
gt ike IGN-REQ --,
gt ike REGION-GT?--,
gt ike CONF-BOOL field: 0x01 ((Settings) Time) / control: 0x01 (Variable Request (0x24)),
gt ike CONF-BOOL field: 0x02 ((Settings) Date) / control: 0x01 (Variable Request (0x24)),
nav glo_l PONG status: 0xc1 (Navi. Computer -> BF [Announce]),
nav ses NAV-VOICE-AF 04,
nav rad TMC-REQ 10,
nav rad TMC-REQ 30
nav rad PONG status: 0x01 (Announce)
gt glo_l PONG status: 0x41 (Navi. GT (MK1/4) -> BF [Announce])
gt ike IGN-REQ --
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
ike anzv ANZV-BOOL-IKE control_a: 00 ((0000 0000) (Settings) Memo: [OFF], (OBC) Timer: [OFF], (OBC) Limit: [OFF]) / control_b: 00 ((0000 0000) (Code) Lock: [OFF], (Aux.) Heating: [OFF], (Aux.) Timer 2: [OFF], (Aux.) Vent.: [OFF], (Aux.) Timer 1: [OFF])
ike glo_l IGN position: 0x01 (Ignition: KL-R (Pos. I))
gt ike CONF-BOOL field: 0x09 ((OBC) Limit) / control: 0x02 (Boolean Request (0x2A))
ike anzv ANZV-BOOL-IKE control_a: 00 ((0000 0000) (Settings) Memo: [OFF], (OBC) Timer: [OFF], (OBC) Limit: [OFF]) / control_b: 00 ((0000 0000) (Code) Lock: [OFF], (Aux.) Heating: [OFF], (Aux.) Timer 2: [OFF], (Aux.) Vent.: [OFF], (Aux.) Timer 1: [OFF])
ike anzv ANZV-VAR-IKE* field: 0x09 ((OBC) Limit) / ike: 00 (--) / chars: 2D 2D 2D 20 4B 4D 2F 48 ("--- KM/H")
gt ike REGION-GT? --
gt ike CONF-BOOL field: 0x0c ((Settings) Memo) / control: 0x02 (Boolean Request (0x2A))
gt ike CONF-BOOL field: 0x07 ((OBC) Distance) / control: 0x01 (Variable Request (0x24))
gt lcm LAMP-REQ --
gt ike CONF-BOOL field: 0x01 ((Settings) Time) / control: 0x01 (Variable Request (0x24))
lcm glo_l LAMP l1: 00 ((0000 0000) ) / l2: 00 ((0000 0000) ) / l3: 00 ((0000 0000) ) / l4: 00 ((0000 0000) )
ike glo_l REGION lang: 0x08 (Unknown?) / b2: 0x81 ((1000 0001) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
gt ike CONF-BOOL field: 0x02 ((Settings) Date) / control: 0x01 (Variable Request (0x24))
ike anzv ANZV-BOOL-IKE control_a: 00 ((0000 0000) (Settings) Memo: [OFF], (OBC) Timer: [OFF], (OBC) Limit: [OFF]) / control_b: 00 ((0000 0000) (Code) Lock: [OFF], (Aux.) Heating: [OFF], (Aux.) Timer 2: [OFF], (Aux.) Vent.: [OFF], (Aux.) Timer 1: [OFF])
ike anzv ANZV-VAR-IKE* field: 0x07 ((OBC) Distance) / ike: 00 (--) / chars: 20 20 20 30 20 4B 4D 20 (" 0 KM ")
ike anzv ANZV-VAR-IKE* field: 0x01 ((Settings) Time) / ike: 00 (--) / chars: 2D 2D 3A 2D 2D 20 20 ("--:-- ")
ike anzv ANZV-VAR-IKE* field: 0x02 ((Settings) Date) / ike: 00 (--) / chars: 2D 2D 2F 2D 2D 2F 32 30 31 39 ("--/--/2019")
gt rad SRC-SND 00 00
gt cid PING --
gt nav_jp SRC-NAV_JP* 02 00
gt bmbt RAD-LED led: 0x90 ((LED) Off (Reset))
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
gt dsp DSP-SET mode: 0x28 (Demo Off) / adjustment: 00 ((0000 0000) Band: 80hz, ±: +, magnitude: "0")
gt ike REGION-SET lang: 0x01 (GB) / b2: 0x05 ((0000 0101) Time: (24h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 00 (b4: "00")
gt ike REGION-SET lang: 0x01 (GB) / b2: 0x05 ((0000 0101) Time: (24h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 00 (b4: "00")
bmbt rad TAPE control: 0x05 (No Tape!)
ike glo_l REGION lang: 0x01 (GB) / b2: 0x05 ((0000 0101) Time: (24h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
ike glo_l REGION lang: 0x01 (GB) / b2: 0x05 ((0000 0101) Time: (24h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
gt ike REGION-SET lang: 0x01 (GB) / b2: 0x85 ((1000 0101) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
gt ike REGION-SET lang: 0x01 (GB) / b2: 0x85 ((1000 0101) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
gt ike CONF-VAR field: 0x07 ((OBC/Nav.) Distance) / input: 00 00 ( 0 )
ike glo_l REGION lang: 0x01 (GB) / b2: 0x85 ((1000 0101) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
ike glo_l REGION lang: 0x01 (GB) / b2: 0x85 ((1000 0101) Time: (12h), Temp.: (C.), Date: (mm/dd)) / b3: 0x60 ((0110 0000) Distance: (km), Consump.: (l/100km)) / b4: 42 (b4: "42")
ike anzv ANZV-VAR-IKE* field: 0x07 ((OBC) Distance) / ike: 00 (--) / chars: 20 20 20 30 20 4B 4D 20 (" 0 KM ")
ike anzv ANZV-VAR-IKE* field: 0x08 ((OBC) Arrival) / ike: 00 (--) / chars: 2D 2D 3A 2D 2D 20 20 ("--:-- ")
no difference mate!
no difference!
rad glo_l PONG status: 0x01 (Announce)
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x61 ((0110 0001) Block: [ON], Flush: [ON], Zone: A/1) / chars: 61 35 20 36 32 20 30 31 20 30 31 20 29 59 34 46 36 4B 75 65 35 28 ("a5 62 01 01 )Y4F6Kue5(")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x42 ((0100 0010) Block: [ON], Zone: B/2) / chars: 61 35 20 36 32 20 30 31 20 30 32 20 64 39 24 3B 70 53 6E 2F 67 6A ("a5 62 01 02 d9$;pSn/gj")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x43 ((0100 0011) Block: [ON], Zone: C/3) / chars: 61 35 20 36 32 20 30 31 20 30 33 20 4C 44 4E 3F 5F 5E 4E 6C 57 23 ("a5 62 01 03 LDN?_^NlW#")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x44 ((0100 0100) Block: [ON], Zone: D/4) / chars: 61 35 20 36 32 20 30 31 20 30 34 20 40 4E 2F 72 6F 26 37 6D 49 58 ("a5 62 01 04 @N/ro&7mIX")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x45 ((0100 0101) Block: [ON], Zone: E/5) / chars: 61 35 20 36 32 20 30 31 20 30 35 20 33 6B 3D 69 40 5B 5E 53 28 43 ("a5 62 01 05 3k=i@[^S(C")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x46 ((0100 0110) Block: [ON], Zone: H2/6) / chars: 61 35 20 36 32 20 30 31 20 30 36 20 6C 58 6C 5C 25 3A 6C 75 6B 48 ("a5 62 01 06 lXl\%:lukH")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 0x47 ((0100 0111) Block: [ON], Zone: H3/7) / chars: 61 35 20 36 32 20 30 31 20 30 37 20 22 23 2D 72 2D 21 25 39 41 29 ("a5 62 01 07 "#-r-!%9A)")
rad gt RAD-A5* layout: 0x62 (Header) / padding: 0x01 (No Padding) / zone: 00 ((0000 0000) Zone: 0) / chars: ("")
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
gt rad UI-GT config: 0x91 ((1001 0001) Main Menu: [ON])
radio announce
radio draw
ignition off
ignition on
radio announce
gt 0x45 as 0x10
radio announce
radio draw
radio hide (0x02 | 0x0c)
ignition off
ignition on
radio announce
gt 0x45 as 0x11
rad glo_l PONG status: 00 (Reply)
rad gt RAD-23 gt: 0x62 ((RDS)) / ike: 0x10 (Overwrite) / chars: 42 2E 67 7A 4F 68 62 6B 3B 3E 60 ("B.gzOhbk;>`")
bmbt glo_h BMBT-GLO 0x34 (0011 0100) :bmbt_menu [Menu] Press
bmbt glo_h BMBT-GLO 0xb4 (1011 0100) :bmbt_menu [Menu] Release
gt rad UI-GT config: 0x91 ((1001 0001) Main Menu: [ON])
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
# some time later
nav gt2 NAV-GT2-AB 11
gt rad UI-GT config: 0x10 ((0001 0000) )
nav gt2 NAV-GT2-AB 21
- GT will send 0x45 at KL-R as response to Radio annoucement.
- but GT will also send 0x45 at KL-R after reset
- GT will retain last display state and render it, and not rely upon radio.
- If radio does not announce/reply- GT will clear display.
note: radio was on and attempts to resume after power cycle
tel anzv ANZV-BOOL-TEL status: 0x04 ((0000 0100) Incoming Call: [ON])
gt rad UI-GT config: 0x11 ((0001 0001) Main Menu: [ON])
rad gt UI-RAD state: 0x01 ((0000 0001) Hide: --, Main Menu: [ON])
# Return
gt bmbt GT-BMBT* a: 0x10 ((0001 0000) Power: [ON], Source: [Nav. GT])
bmbt gt BMBT-GT* 0x05 (0000 0101) :bmbt_confirm [Confirm] Press
gt rad UI-GT config: 0x10 ((0001 0000) )