Does ESP32-C3-WROOM work with this library?

[clarkbremer]

The ESP32 development board I've been using has an ESP32-WROOM-32D module on it. I'm thinking about placing the module directly onto my own PCB (without the development board), but that module is flagged as "not recommended for new designs". So I'm looking at using an ESP32-C3-WROOM-02 module (https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf). Any reason why the A2DP library wouldn't work on that? I notice it's a single core. But they're only $2! Anything else I should be thinking about?

[pschatzmann]

The C3 does not support the Standard Bluetooth stack. It only allows BLE. So A2DP will not be possible

…

On 5 May 2022, at 16:05, Clark Bremer ***@***.***> wrote: The ESP32 development board I've been using has an ESP32-WROOM-32D module on it. I'm thinking about placing the module directly onto my own PCB (without the development board), but that module is flagged as "not recommended for new designs". So I'm looking at using an ESP32-C3-WROOM-02 module (https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf). Any reason why the A2DP library wouldn't work on that? I notice it's a single core. But they're only $2! Anything else I should be thinking about? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.

[clarkbremer]

Thanks. I thought that sounded too good to be true. The 32D is about $4, and I've found dev boards with that module for $6. Not sure I'll get a cost savings that way.