diff --git a/headphone_holder/cable_holder.scad b/headphone_holder/cable_holder.scad
new file mode 100644
index 0000000..33d6efd
--- /dev/null
+++ b/headphone_holder/cable_holder.scad
@@ -0,0 +1,218 @@
+// table
+
+table_height = 25;
+
+module Table() {
+	cube([500,gripper_length,table_height], center=true);
+}
+
+// gripper to attach the cable holder to the table
+
+gripper_width = table_height;
+gripper_length = table_height*2;
+gripper_thickness = 4;
+
+module Gripper() {
+	//gripper top back angle
+	translate([0,-gripper_length/2,table_height/2]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=gripper_width,d=gripper_thickness*2,center=true,$fn=100);
+		}
+	}
+
+	//gripper bottom back angle
+	translate([0,-gripper_length/2,-table_height/2]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=gripper_width,d=gripper_thickness*2,center=true,$fn=100);
+		}
+	}
+
+	//gripper top front angle
+	translate([0,gripper_length/4-gripper_thickness,table_height/2-gripper_thickness/2-gripper_thickness/5]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=gripper_width,d=gripper_thickness*2,center=true,$fn=100);
+		}
+	}
+
+	//gripper bottom front angle
+	translate([0,gripper_length/2-gripper_thickness,-table_height/2]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=gripper_width,d=gripper_thickness*2,center=true,$fn=100);
+		}
+	}
+
+	//gripper top
+	translate([0,-gripper_length/8-gripper_thickness/2,table_height/2+gripper_thickness/6]) {
+		rotate(-gripper_thickness-0.7,[1,0,0]) {
+			cube([gripper_width, 3*gripper_length/4-gripper_thickness, gripper_thickness], center=true);
+		}
+	}
+
+	//gripper left
+	translate([0,-gripper_length/2-gripper_thickness/2,0]) {
+		rotate(90,[1,0,0]) {
+			cube([gripper_width, table_height, gripper_thickness], center=true);
+		}
+	}
+
+	//gripper bottom
+	translate([0,-gripper_thickness/2,-table_height/2-gripper_thickness/2]) {
+			cube([gripper_width, gripper_length-gripper_thickness/2-0.2, gripper_thickness], center=true);
+	}
+}
+
+difference() {
+	Gripper();
+	Table();
+}
+
+// cable holder
+// inspired by: https://www.thingiverse.com/thing:3022893 (USB Cable Holder byjb20200606, CC-BY-NC)
+
+cable_holder_thickness = 12;
+cable_holder_height = table_height/2;
+cable_holder_width = gripper_width*4.5;
+hole_thickness = 8;
+
+module cableHolderBody() {
+	cube([cable_holder_width,cable_holder_thickness,cable_holder_height],center=true,$fn=100);
+	// lower wing
+	translate([0,0,-cable_holder_height/2]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=cable_holder_width,d=cable_holder_thickness,center=true,$fn=100);
+		}
+	}
+	translate([0,cable_holder_thickness/4,-cable_holder_thickness/2]) {
+		cube([cable_holder_width,cable_holder_thickness/2,cable_holder_height],center=true,$fn=100);
+	}
+	// left wing
+	translate([-cable_holder_width/2,0,0]) {
+		cylinder(h=cable_holder_height,d=cable_holder_thickness,center=true,$fn=100);
+	}
+	translate([-cable_holder_thickness/2,cable_holder_thickness/4,0]) {
+		cube([cable_holder_width,cable_holder_thickness/2,cable_holder_height],center=true,$fn=100);
+	}
+	// right wing
+	translate([cable_holder_width/2,0,0]) {
+		cylinder(h=cable_holder_height,d=cable_holder_thickness,center=true,$fn=100);
+	}
+	translate([cable_holder_thickness/2,cable_holder_thickness/4,0]) {
+		cube([cable_holder_width,cable_holder_thickness/2,cable_holder_height],center=true,$fn=100);
+	}
+	// rounded edges bottom
+	translate([cable_holder_width/2,0,-cable_holder_height/2]) {
+		sphere(cable_holder_thickness/2,$fn=100);
+	}
+	translate([cable_holder_width/2,cable_holder_thickness/4,-cable_holder_height/2]) {
+		rotate(90,[1,0,0]) {
+			cylinder(h=cable_holder_thickness/2,d=cable_holder_thickness,center=true, $fn=100);
+		}
+	}
+	translate([-cable_holder_width/2,0,-cable_holder_height/2]) {
+		sphere(cable_holder_thickness/2,$fn=100);
+	}
+	translate([-cable_holder_width/2,cable_holder_thickness/4,-cable_holder_height/2]) {
+		rotate(90,[1,0,0]) {
+			cylinder(h=cable_holder_thickness/2,d=cable_holder_thickness,center=true, $fn=100);
+		}
+	}
+	// rounded edges top
+	translate([cable_holder_width/2,0,cable_holder_height/2]) {
+		sphere(cable_holder_thickness/2,$fn=100);
+	}
+	translate([cable_holder_width/2,cable_holder_thickness/4,cable_holder_height/2]) {
+		rotate(90,[1,0,0]) {
+			cylinder(h=cable_holder_thickness/2,d=cable_holder_thickness,center=true, $fn=100);
+		}
+	}
+	translate([-cable_holder_width/2,0,cable_holder_height/2]) {
+		sphere(cable_holder_thickness/2,$fn=100);
+	}
+	translate([-cable_holder_width/2,cable_holder_thickness/4,cable_holder_height/2]) {
+		rotate(90,[1,0,0]) {
+			cylinder(h=cable_holder_thickness/2,d=cable_holder_thickness,center=true, $fn=100);
+		}
+	}
+	// upper wing
+	translate([0,0,cable_holder_height/2]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=cable_holder_width,d=cable_holder_thickness,center=true,$fn=100);
+		}
+	}
+	translate([0,cable_holder_thickness/4,cable_holder_thickness/2]) {
+		cube([cable_holder_width,cable_holder_thickness/2,cable_holder_height],center=true,$fn=100);
+	}
+}
+
+module cableHoles() {
+	translate([0,-1,0]) {
+		cylinder(h=cable_holder_height+cable_holder_thickness+5,d=hole_thickness,center=true, $fn=100);
+	}
+	translate([0,-cable_holder_thickness/3,0]) {
+		cube([hole_thickness/2+1,hole_thickness/2,cable_holder_height+cable_holder_thickness+5],center=true,$fn=100);
+	}
+}
+
+module smoothie() {
+	// smoothes the upper wing
+	translate([0,-cable_holder_thickness/4,cable_holder_height/2+cable_holder_thickness/12]) {
+		rotate(90,[0,1,0]) {
+			cylinder(h=cable_holder_width+cable_holder_thickness+5, d=cable_holder_thickness/2, center=true, $fn=200);
+		}
+	}
+	translate([0,0,-cable_holder_height/3]) {
+		cube([cable_holder_width+cable_holder_thickness+5, cable_holder_width, cable_holder_height*2], center=true);
+	}
+}
+
+module cableHolder() {
+	intersection(){
+		difference() {
+			cableHolderBody();
+			translate([0,-0.5,0]) { cableHoles(); }
+			distance = ((cable_holder_width-cable_holder_thickness/2)/2);
+			translate([-distance/3,0,0]) { cableHoles(); }
+			translate([-2*distance/3,0,0]) { cableHoles(); }
+			translate([-distance,0,0]) { cableHoles(); }
+			translate([distance/3,0,0]) { cableHoles(); }
+			translate([2*distance/3,0,0]) { cableHoles(); }
+			translate([distance,0,0]) { cableHoles(); }
+			// upper cable canyon
+			translate([0,cable_holder_thickness*0.2,cable_holder_height/2+cable_holder_thickness*0.35]) {
+				rotate(90,[0,1,0]) {
+					cylinder(h=cable_holder_width+cable_holder_thickness+5,d=cable_holder_thickness*0.9,center=true, $fn=100);
+				}
+			}
+		}
+		smoothie();
+	}
+}
+
+translate([0,-gripper_length/2-cable_holder_thickness/2,0]) {
+	cableHolder();
+}
+
+// lower cable holder
+
+module lowerCableHolder() {
+	translate([0,0,-table_height/2-cable_holder_thickness/2]) {
+		rotate(90, [1,0,0]) {
+			difference() {
+				cableHolderBody();
+				translate([0,1,0]) {
+					mirror([0,1,0]) {
+						distance = ((cable_holder_width-cable_holder_thickness/2)/2);
+						translate([-distance/3,0,0]) { cableHoles(); }
+						translate([-2*distance/3,0,0]) { cableHoles(); }
+						translate([-distance,0,0]) { cableHoles(); }
+						translate([distance/3,0,0]) { cableHoles(); }
+						translate([2*distance/3,0,0]) { cableHoles(); }
+						translate([distance,0,0]) { cableHoles(); }
+					}
+				}
+			}
+		}
+	}
+}
+
+//lowerCableHolder();
\ No newline at end of file