Can't plot the subcircuit node voltage curve when using Nutmeg script #773
-
|
Dear developer, When I use the command "write spice4qucs.tr1.plot v(X1.mz)" in Nutmeg Script to visualize the voltage change on a node in the subcircuit, I will encounter an error that is "Warning from checkvalid: vector x1.mz is not available or has zero length". I guess it is because of the destroy and reset commands, as the follow picture. Do you have any solutions?
|
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
You are using Nutmeg script wrong. It is a separate simulation type and it knows nothing about other simulations on the schematic. You should use Nutmeg equation instead. It is different component and located in the equations group. Assign the subcircuit node voltage to some variable and you should be able to export in the dataset. |
Beta Was this translation helpful? Give feedback.
-
|
Moved to Discussion/Q&A. |
Beta Was this translation helpful? Give feedback.
You are using Nutmeg script wrong. It is a separate simulation type and it knows nothing about other simulations on the schematic. You should use Nutmeg equation instead. It is different component and located in the equations group. Assign the subcircuit node voltage to some variable and you should be able to export in the dataset.