The second version of cases for ADALM-PLUTO and Red Pitayas.

Both are designed using Fusion 360. Both binary and ASCII .stl files are provided, along with the full .f3d project.

ADALM-PLUTO Case V2 Lite

ASCII STL File

Binary STL File

New Features

• The footprint of the case is decreased to save filament and print time. It is ideal for initial testing.
• The height of the case is reduced to save filament and print time.
• 4-side walls keep ADALM-PLUTOs in place.
• The side walls that keep ADALM-PLUTOs in place are extended to the wall of the case for rigidity.
• TX and RX labels are moved outside of the ADALM-PLUTOs for easier maintenance.
• TX and RX labels' word sizes are increased for better readability.

Printing Setting

• Printer Build Volume: 300x300x100 or greater, can be printed on some 256x256x256 printers
• Printing Temperature: 215 Celcius (PLA)
• Heat Bed Temperature: 60 Celcius (PLA)
• Layer Height: 0.28 mm (0.4 mm nozzle)
• Print Speed: 120 mm/s
• Walls Count: 3
• Infill Density: >=15%

Red Pitaya Case V2

ASCII STL File

Binary STL File

New Features

• Red Pitayas are kept in a place in the case because of 4 side walls.
• A Red Pitaya can be mounted onto the case using 4 M3x4 machine screws and 5 mm M3 spacers.
• Various openings on the bottom of the case reduce filament usage and save print time.

Printing Setting

• Printer Build Volume: 300x300x100 or greater
• Printing Temperature: 215 Celcius (PLA)
• Heat Bed Temperature: 60 Celcius (PLA)
• Layer Height: 0.28 mm (0.4 mm nozzle)
• Print Speed: 120 mm/s
• Walls Count: 3
• Infill Density: >=15%