bond-ks-initramfs.ks.in

# Test bond configured via kickstart in initramfs
# Because kickstart is obtained (injected in initramfs) without activating
# network (which would be done from boot options network configuration),
# network in initramfs will be activated from kickstart configuration.

%ksappend common/common.ks
%ksappend repos/default.ks
%ksappend l10n/default.ks
%ksappend users/default.ks
%ksappend storage/default.ks
%ksappend payload/default_packages.ks

network --device bond0 --bootproto dhcp --bondslaves=@KSTEST_NETDEV1@,@KSTEST_NETDEV2@ --bondopts=mode=active-backup,primary=@KSTEST_NETDEV1@ --activate

%pre

# We will copy /root/RESULT to /mnt/sysimage/root/RESULT at the beginning of the %post (--nochroot) checks
@KSINCLUDE@ post-lib-network.sh
@KSINCLUDE@ scripts-lib.sh
platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"

if [ "${platform}" == "rhel8" ]; then
    # Ifcfg files for the kickstart configuration are created in initramfs
    check_config_exists bond0 yes
    check_config_exists bond0_slave_1 yes
    check_config_exists bond0_slave_2 yes
    # NM creates 3 connections in initramfs plus
    # 3 connections after switchroot based on ifcfg files created in initramfs.
    # There is a short drop in connectivity switching to the ifcfg connections
    # but it does not seem to be causing any issues.
    check_number_of_connections 6
else
    check_config_exists bond0 no
    check_config_exists @KSTEST_NETDEV1@ no
    check_config_exists @KSTEST_NETDEV2@ no
    # includes "lo" connection
    check_number_of_connections 4
fi

check_device_connected bond0 yes


%end

%post --nochroot

@KSINCLUDE@ post-nochroot-lib-network.sh

# First copy result from %pre stage to chroot
copy_pre_stage_result

@KSINCLUDE@ post-nochroot-lib-network.sh

check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ bond0

%end

%post

@KSINCLUDE@ post-lib-network.sh
@KSINCLUDE@ scripts-lib.sh
platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"

check_device_config_value bond0 ONBOOT yes connection autoconnect __NONE
if [ "${platform}" == "rhel8" ]; then
    check_device_config_value bond0_slave_1 ONBOOT yes connection autoconnect __NONE
    check_device_config_value bond0_slave_1 SLAVE yes connection port-type bond
    check_device_config_value bond0_slave_2 ONBOOT yes connection autoconnect __NONE
    check_device_config_value bond0_slave_2 SLAVE yes connection port-type bond
else
    # config files are not named bond0_slave_1 as opposed to kickstart config
    check_device_config_value @KSTEST_NETDEV1@ ONBOOT yes connection autoconnect __NONE
    check_device_config_value @KSTEST_NETDEV1@ SLAVE yes connection port-type bond
    check_device_config_value @KSTEST_NETDEV2@ ONBOOT yes connection autoconnect __NONE
    check_device_config_value @KSTEST_NETDEV2@ SLAVE yes connection port-type bond
fi

check_device_connected bond0 yes
check_bond_has_slave bond0 @KSTEST_NETDEV1@ yes
check_bond_has_slave bond0 @KSTEST_NETDEV2@ yes

# No error was written to /root/RESULT file, everything is OK
if [[ ! -e /root/RESULT ]]; then
   echo SUCCESS > /root/RESULT
fi
%end