Skip to content

Latest commit

 

History

History
92 lines (62 loc) · 3.64 KB

README.md

File metadata and controls

92 lines (62 loc) · 3.64 KB
Raw

TortoiseBot Mini

1. Installation:

1.1 Download Arduino IDE:

Download the latest version Arduino IDE from https://www.arduino.cc/en/software

1.2 Setup ESP board in Arduino IDE:

Follow the following tutorial to add ESP board in your Arduino IDE - https://randomnerdtutorials.com/how-to-install-esp8266-board-arduino-ide/

Simply go to Files > Preferences and add the following line in the Additional Board Managers URLs:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

After that go into Tools > Board > Boards Manager and search for "esp32" and install the ESP32 board. That's it!

1.3 Install ROS Serial Library for Arduino on Ubuntu:

sudo apt-get install ros-$ROS_DISTRO-rosserial-arduino
sudo apt-get install ros-$ROS_DISTRO-rosserial

1.4 Clone the TortoiseBot Mini Repo:

Clone the TortoiseBot Mini repo into your src folder of your catkin workspace

git clone https://github.com/rigbetellabs/tortoisebot_mini

2. Setup:

2.0 Build the Arduino serial library and msgs

Navigate to Arduino > libraries Open a terminal in the current directory

rosrun rosserial_arduino make_libraries.py .

This should build the required msgs

2.1 Change Wi-Fi's SSID and Password:

Open the tortoisebot_mini_ros code in Arduino IDE and change the SSID and Password on line number 25 & 26 to that of your Wi-Fi Connection.

2.2 Change the ROS Master IP Address:

Check the IP Address of your ROS Master PC using ifconfig command and put that in line number 31 of tortoisebot_mini_ros code with commas(,) instead of dot(.)

2.3 Check Board and Port:

Make sure the switch on motor driver board is turned off and battery is not connected and then connect your ESP32 board to your computer using USB type B cable. Make sure the board is selected to "ESP32 Dev Module" in Arduino IDE and select the appropriate Port as well.

2.4 Upload the Code:

Upload the tortoisebot_mini_ros code on your ESP32 board.

2.5 Connection:

Once code is Successfully uploaded, disconnect the USB Cable and connect the DC Jack of Battery to the Board .
DO NOT TURN ON THE ROBOT YET!

3. Demo:

3.1 Running ROS Master:

Launch the tortoisebot_mini.launch file on your Master PC to start ROS Master along with ROS Serial Node.

roslaunch tortoisebot_mini tortoisebot_mini.launch

It will prompt a INFO message saying "Waiting for socket connections on port 11411 waiting for socket connection"

3.2 Turning on Robot:

Once the above INFO message is popped up, then you can turn on your Robot upon which you will see that different ROS topics start automatically.

3.3 Testing out Teleop:

Keep the previous terminal running add on a new terminal type the following command to start the teleoperation node.

rosrun teleop_twist_keyboard teleop_twist_keyboard.py

Note that the minimum operational speed for the robot is :

  • Linear Velocity : 0.131 m/s
  • Angular Velocity : 2.175 r/s

Now you can control the robot using teleoperation commands.

References: