Flameshot-git tray icon consistently not showing on start

[crimsonduelist]

Please fill out this form and delete the defaults(everything not in bold font), so I can help you better
Describe the bug
I m using flameshot-git.
I m starting gbar first before everything else but I still wont see the flameshot icon. It loads fine if i just kill flameshot and start it

Steps to Reproduce
Set gbar to start before the rest of your autostarted programs
Set flameshot to after gBar
i.e. in my hyprland custom conf :

exec-once = gBar bar 0
exec-once =[workspace 9 silent] flameshot &  

Expected behavior
flameshot tray icon should show normally as the rest of the icons

Screenshots/Error logs

Please include as much information about the crash/bug as possible.
Havent made any modifications in the css
Here s the tmp/log if it s usefull and i m not sure if there s another log file i should provide

Set value for ForceCSS: false
Set value for WidgetsLeft: [Workspaces]
Set value for WidgetsCenter: [Time]
Set value for WidgetsRight: [Tray, Packages, Audio, Network, Disk, VRAM, GPU, RAM, CPU, Battery, Power]
Set value for CPUThermalZone: /sys/devices/pci0000:00/0000:00:18.3/hwmon/hwmon2/temp1_input
Set value for DrmAmdCard: card1
Set value for AmdGPUThermalZone: /device/hwmon/hwmon1/temp1_input
Set value for SuspendCommand: ~/.config/scripts/sys.sh suspend
Set value for LockCommand: ~/.config/scripts/sys.sh lock
Set value for ExitCommand: killall Hyprland
Set value for BatteryFolder: /sys/class/power_supply/BAT1
Set value for BatteryWarnThreshold: 20
Set value for DiskPartition: /
Set value for DefaultWorkspaceSymbol: 
Set value for ShutdownIcon: \s
Set value for RebootIcon: 󰑐
Set value for SleepIcon: 󰏤
Set value for LockIcon: 
Set value for ExitIcon: 󰗼
Set value for BTOffIcon: 󰂲
Set value for BTOnIcon: 󰂯
Set value for BTConnectedIcon: 󰂱
Set value for DevKeyboardIcon: 󰌌\s
Set value for DevMouseIcon: 󰍽\s
Set value for DevHeadsetIcon: 󰋋\s
Set value for DevControllerIcon: 󰖺\s
Set value for DevUnknownIcon: \s
Set value for SpeakerMutedIcon: 󰝟
Set value for SpeakerHighIcon: 󰕾
Set value for MicMutedIcon: 󰍭
Set value for MicHighIcon: 󰍬
Set value for PackageOutOfDateIcon: 󰏔\s
Set value for WorkspaceScrollOnMonitor: true
Set value for WorkspaceScrollInvert: false
Set value for NumWorkspaces: 9
Set value for UseHyprlandIPC: true
Set value for Location: T
Set value for IconsAlwaysUp: false
Set value for CenterWidgets: true
Set value for CenterSpace: 300
Set value for DateTimeStyle: %a %D - %H:%M:%S %Z
Set value for MaxTitleLength: 30
Set value for AudioInput: false
Set value for AudioRevealer: false
Set value for AudioScrollSpeed: 5
Set value for AudioNumbers: false
Set value for CheckPackagesCommand: p="$(checkupdates)"; e=$?; if [ $e -eq 127 ] ; then exit 127; fi; if [ $e -eq 2 ] ; then echo "0" && exit 0; fi; echo "$p" | wc -l
Set value for CheckUpdateInterval: 300
Set value for NetworkAdapter: eno1
Set value for NetworkWidget: true
Set value for SensorTooltips: false
Set value for SensorSize: 24
Set value for NetworkIconSize: 24
Set value for EnableSNI: true
Set value for MinDownloadBytes: 0
Set value for MaxDownloadBytes: 10485760
Set value for MinUploadBytes: 0
Set value for MaxUploadBytes: 5242880
Wayland: Register <pending> at ID 0
Wayland: Monitor at ID 0 got name DP-3
NVML not found, disabling Nvidia GPU
Can't connect to BlueZ d-bus! Disabling Bluetooth!
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable
PulseAudio: Context is ready!
PulseAudio: Update info
Warning: Couldn't open /home/crimson/.config/gBar/style.scss
Warning: Failed loading SCSS, falling back to CSS!
Warning: Couldn't open /home/crimson/.config/gBar/style.css
Warning: Couldn't open /home/crimson/.local/share/gBar/style.scss
Warning: Failed loading SCSS, falling back to CSS!
Warning: Couldn't open /home/crimson/.local/share/gBar/style.css
Warning: Couldn't open /usr/local/share/gBar/style.scss
Warning: Failed loading SCSS, falling back to CSS!
Warning: Couldn't open /usr/local/share/gBar/style.css
Info: Compiling /usr/share/gBar/style.scss
SCSS found and loaded successfully!
Window: Create on monitor DP-3
Couldn't open battery charge files! Disabling battery widget.
SNI: Registered Item :1.35 /StatusNotifierItem
SNI: Registered Item :1.7 /org/ayatana/NotificationItem/udiskie
SNI: Registered Item :1.46 /StatusNotifierItem
SNI: Creating Item :1.46 /StatusNotifierItem
SNI: Creating Item :1.7 /org/ayatana/NotificationItem/udiskie
SNI: Creating Item :1.35 /StatusNotifierItem
SNI: Tooltip: KAlarm
SNI: Menu object path: /MenuBar
SNI: Creating icon from "kalarm-partdisabled"
SNI: Allocating static name buffer for :1.46
SNI: Add :1.46 to widget
SNI: No tooltip found, using title as tooltip
SNI: Fallback tooltip: udiskie
SNI: Menu object path: /org/ayatana/NotificationItem/udiskie/Menu
SNI: Creating icon from "drive-removable-media-usb-panel"
SNI: Allocating static name buffer for :1.7
SNI: Add :1.7 to widget
SNI: Tooltip: plsnthanku!kdbx.kdbx [Locked] - KeePassXC
SNI: Menu object path: /MenuBar
SNI: Creating icon from "keepassxc-monochrome-light-locked"
SNI: Allocating static name buffer for :1.35
SNI: Add :1.35 to widget
PulseAudio: Update info
SNI: Opened popup!
PulseAudio: Update info
SNI: Opened popup!
PulseAudio: Update info
SNI: Registered Item :1.61 /org/ayatana/NotificationItem/steam
SNI: Creating Item :1.61 /org/ayatana/NotificationItem/steam
SNI: No tooltip found, using title as tooltip
SNI: Fallback tooltip: Steam
SNI: Menu object path: /org/ayatana/NotificationItem/steam/Menu
SNI: Creating icon from "steam_tray_mono"
SNI: Allocating static name buffer for :1.61
SNI: Add :1.61 to widget
SNI: Opened popup!
SNI: Opened popup!
PulseAudio: Update info
SNI: Opened popup!
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
Switching workspace: hyprctl dispatch workspace 1
PulseAudio: Update info
PulseAudio: Update info
Switching workspace: hyprctl dispatch workspace 3
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info
Switching workspace: hyprctl dispatch workspace 4
Switching workspace: hyprctl dispatch workspace 1
PulseAudio: Update info
PulseAudio: Update info
PulseAudio: Update info`

• Havent really changed anything from default config - I d changed the card name for gpu to card1 cuz that what was there.

# Example configuration.
# Everything after '#' is ignored
# Format of the variables:
#    [variable]: [value]
# Whitespaces are ignored in the following locations:
# - Before the variable
# - After the ':'
# - After the value
#
# String variables can be escaped ([Notation in config] -> "Result"):
# - foo\\bar -> "foo<backlash>bar"
# - foo\nbar -> "foo<newline>bar"
# - foo\sbar -> "foo bar"

# If true, gBar ignores *.scss files and only tries to load *.css files.
# This is useful, if you don't want to SCSS, or if you want to use newer SCSS features,
# that libsass (the backend gBar uses) doesn't support.
ForceCSS: false

# The following three options control the ordering of the widgets.
# Reordering can cause slight margin inconsistencies,
# so it is recommend to only make minor adjustments to the default layout.
# Adding the same widget multiple times to the layout is *not* supported and will cause issues.

# Widgets to show on the left side
WidgetsLeft: [Workspaces]
# Widgets to center
WidgetsCenter: [Time]
# Widgets to display on the right side
WidgetsRight: [Tray, Packages, Audio, Network, Disk, VRAM, GPU, RAM, CPU, Battery, Power]

# The CPU sensor to use
CPUThermalZone: /sys/devices/pci0000:00/0000:00:18.3/hwmon/hwmon2/temp1_input

# The card to poll when using AMDGPU. If you don't have an AMD card, you can skip this config.
# Possible values can be found by querying /sys/class/drm
DrmAmdCard: card1

# Relative path to AMD gpu thermal sensor, appended after /sys/class/drm/<DrmAmdCard>
AmdGPUThermalZone: /device/hwmon/hwmon1/temp1_input

# The command to execute on suspend
SuspendCommand: ~/.config/scripts/sys.sh suspend

# The command to execute on lock
LockCommand: ~/.config/scripts/sys.sh lock

# The command to execute on exit
ExitCommand: killall Hyprland

# The folder, where the battery sensors reside
BatteryFolder: /sys/class/power_supply/BAT1

# Threshold, when the battery is considered low and a different color (as specified by the 'battery-warning' CSS property) is applied
BatteryWarnThreshold: 20

# The partition to monitor with disk sensor
DiskPartition: /

# Overrides the icon of the nth (in this case the first) workspace.
# Please note the missing space between "," and the symbol. Adding a space here adds it to the bar too!
#WorkspaceSymbol: 1,

# The default symbol for the workspaces
DefaultWorkspaceSymbol: 

# All of the icons that can be modified.
# Please note that some icons require a space ("\s") (e.g. default ShutdownIcon)
ShutdownIcon: \s
RebootIcon: 󰑐
SleepIcon: 󰏤
LockIcon: 
ExitIcon: 󰗼
BTOffIcon: 󰂲
BTOnIcon: 󰂯
BTConnectedIcon: 󰂱
DevKeyboardIcon: 󰌌\s
DevMouseIcon: 󰍽\s
DevHeadsetIcon: 󰋋\s
DevControllerIcon: 󰖺\s
DevUnknownIcon: \s
SpeakerMutedIcon: 󰝟
SpeakerHighIcon: 󰕾
MicMutedIcon: 󰍭
MicHighIcon: 󰍬
PackageOutOfDateIcon: 󰏔\s

# Scroll through the workspaces of the current monitor instead of all workspaces
WorkspaceScrollOnMonitor: true

# When true: Scroll up -> Next workspace instead of previous workspace. Analogous with scroll down
WorkspaceScrollInvert: false

# Number of workspaces to display. Displayed workspace IDs are 1-n (Default: 1-9)
NumWorkspaces: 9

# Use Hyprland IPC instead of the ext_workspace protocol for workspace polling.
# Hyprland IPC is *slightly* less performant (+0.1% one core), but way less bug prone,
# since the protocol is not as feature complete as Hyprland IPC.
# NOTE: Hyprland no longer supports ext-workspace-unstable-v1 as of commit bb09334.
# Hyprland IPC is thus *required* for workspace support under Hyprland >=v0.30.0!
UseHyprlandIPC: true

# The location of the bar
# Needs to be capitalized!!
# Values are: L (Left), R (Right), T (Top), B (bottom)
Location: T

# When the location is set to side, this option forces everything (even text) to be right-side up.
# *Always* make sure to enable SensorTooltips when enabling this option. Failure to do so *will* cause graphical issues.
IconsAlwaysUp: false

# Forces the widgets in the center to be centered.
# This can cause the right widget to clip outside, if there is not enough space on screen (e.g. when opening the text)
# Setting this to false will definitely fix this issue, but it won't look very good, since the widgets will be off-center.
# So try to decrease "CenterSpace" first, before setting this configuration to false.
# Legacy name: CenterTime
CenterWidgets: true

# How much space should be reserved for the center widgets. Setting this too high can cause the right widgets to clip outside.
# Therefore try to set it as low as possible if you experience clipping.
# Although keep in mind, that a value that is too low can cause the widget to be be off-center,
# which can also cause clipping.
# If you can't find an optimal value, consider setting 'CenterWidgets' to false
# Legacy name: TimeSpace
CenterSpace: 300

# Set datetime style
DateTimeStyle: %a %D - %H:%M:%S %Z

# Set datetime locale (defaults to system locale if not set or set to empty string)
#DateTimeLocale: de_DE.utf8

# How many characters of the title can be displayed. Note that higher values *will* cause styling issues, especially when it is in the center.
# If you have the title in the center, consider also increasing "CenterSpace"
MaxTitleLength: 30

# Adds a audio input(aka. microphone) widget
AudioInput: false

# Sets the audio slider to be on reveal (Just like the sensors) when true. Only affects the bar.
AudioRevealer: false

# Sets the rate of change of the slider on each scroll. In Percent
AudioScrollSpeed: 5

# Display numbers instead of a slider for the two audio widgets. Doesn't affect the audio flyin
AudioNumbers: false

# Command that is run to check if there are out-of-date packages.
# The script should return *ONLY* a number. If it doesn't output a number, updates are no longer checked.
# Default value is applicable for Arch Linux. (See data/update.sh for a human-readable version)
CheckPackagesCommand: p="$(checkupdates)"; e=$?; if [ $e -eq 127 ] ; then exit 127; fi; if [ $e -eq 2 ] ; then echo "0" && exit 0; fi; echo "$p" | wc -l


# How often to check for updates. In seconds
CheckUpdateInterval: 300

# Limits the range of the audio slider. Only works for audio output.
# Slider "empty" is AudioMinVolume, Slider "full" is AudioMaxVolume
# AudioMinVolume: 30 # Audio can't get below 30%
# AudioMaxVolume: 120 # Audio can't get above 120%

# The network adapter to use. You can query /sys/class/net for all possible values
NetworkAdapter: eno1

# Disables the network widget when set to false
NetworkWidget: true

# Use tooltips instead of sliders for the sensors
SensorTooltips: false

# The size of the of the circular sensors
SensorSize: 24

# The size of the network icon
NetworkIconSize: 24

# Enables tray icons
EnableSNI: true

# SNIIconSize sets the icon size for a SNI icon.
# SNIPaddingTop Can be used to push the Icon down. Negative values are allowed
# SNIIconName overrides what icon from an icon theme to display.
# SNIDisabled prevents an icon from being registered.
# For all SNI properties: The first parameter is a filter of the tooltip(The text that pops up, when the icon is hovered) of the icon.
# The wildcard filter '*' does not work for SNIIconName and SNIDisabled

# Scale everything down to 25 pixels ('*' as filter means everything)
#SNIIconSize: *, 25
# Explicitly make OBS a bit smaller than default
#SNIIconSize: OBS, 23
# Nudges the Discord icon a bit down
#SNIPaddingTop: Discord, 5
# Override the default icon given to gBar by discord to an icon theme supplied one (Example is from papirus theme)
#SNIIconName: Discord, discord-tray
# Prevents steam from displaying. Note: Steam doesn't have a tooltip, which means the object path is filtered instead.
#SNIDisabled: steam, true

# These set the range for the network widget. The widget changes colors at six intervals:
#    - Below Min...Bytes ("under")
#    - Between ]0%;25%]. 0% = Min...Bytes; 100% = Max...Bytes ("low")
#    - Between ]25%;50%]. 0% = Min...Bytes; 100% = Max...Bytes ("mid-low")
#    - Between ]50%;75%]. 0% = Min...Bytes; 100% = Max...Bytes ("mid-high")
#    - Between ]75%;100%]. 0% = Min...Bytes; 100% = Max...Bytes ("high")
#    - Above Max...Bytes ("over")
MinDownloadBytes: 0
MaxDownloadBytes: 10485760 # 10 * 1024 * 1024 = 10 MiB
MinUploadBytes:   0
MaxUploadBytes:   5242880    # 5 * 1024 * 1024 = 5 MiB

Information about your system and gBar

• OS: Arch
• Desktop environment Hyprland
• commit sha256 if possible r255.81b97f9-1