diff --git a/Contest.md b/Contest.md
deleted file mode 100644
index c3be22f3..00000000
--- a/Contest.md
+++ /dev/null
@@ -1,26 +0,0 @@
-## Contest note!
-
-<div align="center">
-<img alt="Contest logo" src="contest.png" height="280" width="280">
-</div>
-
-**Because of the extreme amount of optimizations, developer's discretion is advised!** *Evil laugh*
-
-The build system is the same as in the original Wallet V5, **no security features have been sacrificed**
-for performance improvements, that is - there are **practically no tradeoffs or compromises**.
-
-Message and storage layouts were **not changed**, although some rearragement might squeeze a little more gas,
-but that may break existing optimizations due to stack reordering.
-
-Also, **tests were improved** - a **Global Gas Counter** mechanism was added that accounts for gas in all transactions
-of all test suites and cases (except for negative and getter ones). This allows to keep an eye on other non-contest
-cases to track how bad is tradeoff when performing optimizations here and there.
-
-Another utility that was developed for contest is ***scalpel script***, that allows for a detailed, *really* detailed optimizations
-of the code by comparing lines of code function by function, printing out diffs, and providing detailed TVM files with
-stack comments and rewrites. This utility allowed to make some latter optimizations, since with each optimization
-next one becomes exponentionally harder to make. While result is not entirely precise and is needed to be verified
-by tests, this allows to instantly estimate whether there is some progress or not, since scalpel is executed immediately,
-while tests take approximately 10 seconds to execute.
-
-### Details of optimizations, their rationale and explanations, comparison of consumed gas both in test cases and not in test cases (global gas counter) are provided on a dedicated page: [Gas improvements](Improvements.rst).
diff --git a/Improvements.rst b/Improvements.rst
deleted file mode 100644
index 9560ab9d..00000000
--- a/Improvements.rst
+++ /dev/null
@@ -1,447 +0,0 @@
-Improvements log
-================
-
-In this section a table is presented with optimization results in several projections.
-
-Contest test cases display how much gas is used by contest-like methods of test suite, total saved and percentage
-as compared to the original commit gas use.
-
-Global gas counters were introduced after commit ``Keep your functions close and vars even closer`` to make a measurable
-metric of "tradeoff" between contest test cases and all other cases, that are totalled by their corresponding test suite.
-
-Only positive (no fail) tests without getters (since there is no point to optimize getters) are included in the table.
-
-This metric proven to be useful, because an ``Localize extensions in loop and short-circ simple`` commit resulted in very
-big jump in savings on the test cases, meanwhile it severly impaired all other cases (GGC increased a lot on it). As a
-result, the very next commit ``Refactored internal message flows, good GGC value`` managed to bring the GGC below the initial
-total level, with further commits do a ``stable development`` of contest test cases with improving GGC as well.
-
-+----------------------------------------------------------------+-------------------------------------------+--------------------------------+
-| Commit                                                         |               Contest test cases          |       Global gas counters      |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| .____________________________________________________________. | Ext  | Int  | Extn | Total | Save | Perc% | Exter | Inter | Exten | Total  |
-+================================================================+======+======+======+=======+======+=======+=======+=======+=======+========+
-| *Origin point: INITIAL*                                        | 3235 | 4210 | 2760 | 10205 | 0    | 0.00% | 64038 | 71163 | 38866 | 174067 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Optimized unneccessary cell loads and operations               | 3185 | 4014 | 2744 | 9943  | 262  | 2.56% | 65556 | 70764 | 40304 | 176624 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Removed unneccessary always true check                         | 3185 | 3823 | 2501 | 9509  | 696  | 6.82% | 65504 | 68993 | 38998 | 173495 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Unrolled the common internal handler code                      | 3185 | 3700 | 2373 | 9258  | 947  | 9.28% | 65504 | 67886 | 38204 | 171594 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Implicitly return from the external handler                    | 3165 | 3700 | 2373 | 9238  | 967  | 9.48% | 65264 | 67886 | 38204 | 171354 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Reaped benefits of separated internal loaders                  | 3165 | 3700 | 2295 | 9160  | 1045 | 10.2% | 65264 | 67886 | 37736 | 170886 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Discarded unneccessary slice remains in dispatcher             | 3155 | 3690 | 2285 | 9130  | 1075 | 10.5% | 65034 | 67716 | 37646 | 170396 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Loaded auth_kind optionally using LDUQ instruction             | 3155 | 3654 | 2249 | 9058  | 1147 | 11.2% | 65050 | 67408 | 37430 | 169888 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Is ifnot a joke for you? (emits less instructions)             | 3155 | 3654 | 2231 | 9040  | 1165 | 11.4% | 65050 | 67408 | 37322 | 169780 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Localize extensions in loop and short-circ simple              | 3045 | 3644 | 2121 | 8810  | 1395 | 13.7% | 69697 | 71316 | 39314 | 180327 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Reordering int msg handlers somehow saves 10 gas               | 3045 | 3567 | 2188 | 8800  | 1405 | 13.8% | 69697 | 70623 | 39716 | 180036 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Moving signature check higher saves some gas                   | 3027 | 3549 | 2188 | 8764  | 1441 | 14.1% | 69481 | 70461 | 39716 | 179658 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Reordering checks somehow sames some more gas                  | 3009 | 3531 | 2188 | 8728  | 1477 | 14.5% | 69265 | 70299 | 39716 | 179280 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Removing end_parse is -gas and +reliability                    | 2983 | 3505 | 2188 | 8676  | 1529 | 15.0% | 68953 | 70065 | 39716 | 178734 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Keep your functions close and vars even closer                 | 2957 | 3505 | 2188 | 8650  | 1555 | 15.2% | 68641 | 70065 | 39716 | 178422 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < restore extensions var in loop >                             | 3067 | 3533 | 2288 | 8888  |      |       | 65669 | 67568 | 38456 |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < move complex logic to inline_ref >                           | 2957 | 3423 | 2316 | 8696  |      |       | 65528 | 67495 | 39148 |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < optimize tail loading of extensions >                        | 2957 | 3423 | 2298 | 8678  |      |       | 65528 | 67495 | 39040 |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < optimize preference for simple ext ops >                     | 2957 | 3423 | 2248 | 8628  |      |       | 65528 | 67495 | 39324 |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Refactored internal message flows, good GGC value              | 2957 | 3423 | 2248 | 8628  | 1577 | 15.5% | 65528 | 67495 | 39324 | 172347 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| ^^^ This commit finally shows TOTAL GGC less then initial one WHILE providing 15.5% gas save on contest test cases! ^^^                     |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Reorganized inlining point for extension message flow          | 2957 | 3423 | 2230 | 8610  | 1595 | 15.6% | 65528 | 67495 | 38782 | 171805 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Do not carry around params not needed (ext opt)                | 2957 | 3423 | 2176 | 8556  | 1649 | 16.2% | 65176 | 67275 | 38586 | 171037 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Optimize argument order to match stack                         | 2939 | 3405 | 2148 | 8492  | 1713 | 16.8% | 64960 | 67113 | 38346 | 170419 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Swapping extn and sign order back saves some net gas           | 2939 | 3464 | 2063 | 8466  | 1739 | 17.0% | 65004 | 67676 | 37876 | 170556 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Short-circuit optimization of LDUQ with IFNOTRET               | 2939 | 3420 | 2019 | 8378  | 1827 | 17.9% | 64929 | 67205 | 37612 | 169746 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < short-circuit flags check with asm >                         | 2939 | 3402 | 2001 | 8342  |      |       |       |       |       |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < short-circuit int msg sign last check with asm >             | 2939 | 3376 | 2001 | 8316  |      |       |       |       |       |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < short-circuit ext msg sign last check with asm >             | 2913 | 3376 | 2001 | 8290  |      |       |       |       |       |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| < short-circuit extension dictionary check with asm >          | 2913 | 3376 | 1983 | 8272  |      |       |       |       |       |        |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Short-circuited some returns with asm                          | 2913 | 3376 | 1983 | 8272  | 1933 | 18.9% | 64599 | 66791 | 37373 | 168763 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| ASM-optimized simple action cases                              | 2885 | 3348 | 1981 | 8214  | 1991 | 19.5% | 64470 | 66700 | 37351 | 168521 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Optimized out more unneeded instructions if may RET            | 2885 | 3338 | 1955 | 8178  | 2027 | 19.9% | 64470 | 66610 | 37177 | 168257 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Removed another unneccessary DROP with preload uint            | 2875 | 3338 | 1955 | 8168  | 2037 | 20.0% | 64350 | 66610 | 37177 | 168137 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| ^^^ Finally got **20%** optimization in test cases! ^^^                                                                                     |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Reordered argument order to optimize stack operations          | 2857 | 3320 | 1955 | 8132  | 2073 | 20.3% | 64134 | 66448 | 37137 | 167719 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Rewritten RETALT to IFNOTJMP - less gas, more reliable         | 2836 | 3299 | 1934 | 8069  | 2136 | 20.9% | 64071 | 66406 | 37220 | 167697 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Another argument stack optimization (psr -> dr call)           | 2818 | 3281 | 1934 | 8033  | 2172 | 21.3% | 64017 | 66370 | 37220 | 167607 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| ^^^ Finally this solution is better then original in **EVERY** test suite branch! The last hurdle - Exter GGC is now less!!! ^^^            |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Black magic route optimization (drop some result later)        | 2818 | 3281 | 1916 | 8015  | 2190 | 21.5% | 64017 | 66370 | 37130 | 167517 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Another black magic optimization (drop auth_kind later)        | 2818 | 3281 | 1906 | 8005  | 2200 | 21.6% | 64017 | 66370 | 37102 | 167489 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Backported FunC optimizations from entrypoint branch           | 2782 | 3373 | 1824 | 7979  | 2226 | 21.8% | 60011 | 64810 | 34138 | 158959 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Use SDBEGINS to enforce prefix in external message             | 2710 | 3373 | 1824 | 7907  | 2298 | 22.5% | 59147 | 64810 | 34138 | 158095 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Use SDBEGINSQ to check internal message prefixes               | 2710 | 3283 | 1736 | 7729  | 2476 | 24.3% | 59237 | 64090 | 33578 | 156905 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Backport some optimizations from EP and coalesce code          | 2699 | 3165 | 1828 | 7692  | 2513 | 24.6% | 59108 | 63031 | 34141 | 156280 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| Optimized instructions order for extension and fix args        | 2699 | 3165 | 1810 | 7674  | 2531 | 24.8% | 59108 | 63031 | 34033 | 156172 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-| *Reminder and origin point: INITIAL*                           | 3235 | 4210 | 2760 | 10205 | 0    | 0.00% | 64038 | 71163 | 38866 | 174067 |
-+----------------------------------------------------------------+------+------+------+-------+------+-------+-------+-------+-------+--------+
-
-*It seems that backporting optimization wiggles around values here and there.* To get the maximum possible gas savings please consider taking
-a look at ``entrypoint`` ("radical") branch. Since optimizations are carefully made there, they decrease used gas by all cases without compromises.
-
-As an example, here is a comparison of used gas in main ("conservative") and entrypoint ("radical") branches:
-
-+-----------------+----------+----------------+
-| Test case       | main gas | entrypoint gas |
-+=================+==========+================+
-| External        | 2699     | **2707**       |
-+-----------------+----------+----------------+
-| Internal        | 3165     | **2963**       |
-+-----------------+----------+----------------+
-| Extension       | 1810     | **1608**       |
-+-----------------+----------+----------------+
-| External GGC    | 59108    | **58893**      |
-+-----------------+----------+----------------+
-| Internal GGC    | 63031    | **61011**      |
-+-----------------+----------+----------------+
-| Extension GGC   | 34033    | **32821**      |
-+-----------------+----------+----------------+
-
-The external test case uses a tiny miniscule more gas due to if ordering, making it way around messes up cell slicing completely.
-Nevertheless, external global counter is still less, therefore the overall result is not that bad.
-
-N.B. Contest multiplier: 9905/10205 = 0.9706 (approximate) -> place multipliers ~ 0.3235342, 0.0970602, 0.0485301
-
-Details and rationale
-=====================
-
-In this section, details of optimization in each commit are pointed out, sometimes with detailed rationale and reasoning,
-when neccessary (in some relatively controversial optimizations).
-
-Origin point: INITIAL
----------------------
-The origin point, the state of the contract when the contest was started. It is used as a basis point to measure further improvements.
-
-Optimized unneccessary cell loads and operations
-------------------------------------------------
-There is some data that is not needed to be loaded right away, since most likely it won't be used, so that data loading is deferred
-until the moment it is actually needed. First of all, that is ``extensions`` dictionary, since loading dict (consequently, a cell)
-is a pretty expensive operation.
-
-Also, reading ``stored_subwallet, public_key, extensions`` and writing them back just to increase ``stored_seqno`` is completely
-unneccessary, so I took a snapshot of slice immediately after ``stored_seqno``, and write it as a slice, instead of 3 write operations
-when increasing the ``stored_seqno``.
-
-Instead of ``extensions`` now ``immutable_tail`` is being passed around, and ``extensions`` are extracted from it, when needed.
-
-Removed unneccessary always true check
---------------------------------------
-Adding return to the if condition decreased amount of gas (due to turning ``IF`` into ``IFJMP``), and, consequently,
-second check of opcode is not required, since it is allowed to be only one of two options, one of which was already checked.
-
-Unrolled the common internal handler code
------------------------------------------
-Copying the common data load code to separate execution paths in internal message handler somehow saves considerable amount
-of gas, but, most importantly, allows to optimize the data loading in future (since it is now different code).
-
-Implicitly return from the external handler
--------------------------------------------
-*Explicity* (commit name has logic mistake) returning from the external handler saves some gas due to some TVM optimizations.
-
-Reaped benefits of separated internal loaders
----------------------------------------------
-Because data loading is now handled separately for signed and extension messages, it is possible to optimize data loading
-so as not to waste unneccessary gas to load data that is not required for a specific execution path.
-
-More precisely, extensions are now loaded from immutable tail, that allows to streamline stack manipulations that decrease
-amount of used gas, also, this logic will be even more simplified in future to save even more gas.
-
-Discarded unneccessary slice remains in dispatcher
---------------------------------------------------
-Using ``preload_ref`` instead of ``load_ref`` on a varible that is not used anymore saves considerable amount of gas, since
-it is not required anymore to do stack manipulations and dropping the unneccessary result.
-
-Loaded auth_kind optionally using LDUQ instruction
---------------------------------------------------
-An ``LDUQ`` TVM instruction was used to construct a ``try_load_uint32`` that attempts to load an ``uint32`` from a slice,
-and returns the success indicator alongside with result, that allows to compact checking of availability of bits in slice
-and reading the integer itself into one instruction - less branching, instructions, checks and gas.
-
-Is ifnot a joke for you? (emits less instructions)
---------------------------------------------------
-Using ``ifnot`` instead of ``if ~...`` saves gas, since ``NOT`` instruction is not needed anymore. ``ifnot`` has same price
-and bit length as the ``if``, therefore it is **always** advised to use ``ifnot`` for negative conditions.
-
-Localize extensions in loop and short-circ simple
--------------------------------------------------
-In this commit, there are two different changes. First one is localizing ``extensions`` inside loop, that allowed to save
-some gas in case ``extensions`` are not needed to be changed.
-
-**The second one is one of the most important optimizations**, that opens the door for many more further gas optimizations
-in the code. The idea is that if the message is simple, that it, has no extended actions (the first bit is right away 0),
-it is possible to immediately do the ``set_actions`` and ``return``.
-
-While the first idea has a noticeable tradeoff, that will be eliminated in future by optimizations all around the code,
-the second one does not make other execution paths more pricey, while making the main ones much better in terms of gas.
-
-Reordering int msg handlers somehow saves 10 gas
-------------------------------------------------
-Moving ``sign`` above ``extn`` one in internal message handler somehow saved 10 gas.
-
-Moving signature check higher saves some gas
---------------------------------------------
-In ``process_signed_request`` moving signature check to the top of the function saves some gas.
-
-Reordering checks somehow sames some more gas
----------------------------------------------
-In ``process_signed_request`` changing order of parameter checks decreased amount of stack manipulations and saved some gas.
-
-Removing end_parse is -gas and +reliability
--------------------------------------------
-In this commit, ``end_parse`` (and coincidentally now unneeded ``skip_dict``) was removed from this code. This leads to
-increased reliability, less gas usage, and opens road to some more optimizations (like tail preloading).
-
-**While decreasing gas usage and opening road to more optimizations is pretty obvious, let's me explain on the increased reliabilty.**
-
-The idea behind it is, that usually, ``end_parse`` is used to force structure of user messages. Therefore, mostly, using
-it to enforce structure of internal data of the contract is quite excessive, since the contract itself is the one, who
-only can write it's own data, and therefore if it cannot be corrupted by the code, then there is no way extra data appears
-after the expected end. Therefore, using ``end_parse`` is unneccessary, and just wastes gas.
-
-However, in this contract the user can directly do ``set_data`` using extended actions on the contract. And here is the point
-why reliability of the contract is actually **increased** by removing the ``end_parse``. It is possible in future, that the
-user might accidentally append extra data to the end of the contract. This may happen if the user would like to upgrade the
-contract, it will have some more extra data, but for some reason failed or forgot to do the code upgrade action, or it failed
-one or another way. In this situation the user will end up with **the old contract with the new data**. And in this situation,
-all the TONs, tokens and NFTs on this wallet will be locked **forever!!!** just because of that ``end_parse``. Therefore,
-removing the ``end_parse`` also helps against such kind of mistakes, and there are no any kind of implications on removing it.
-
-The only place where it should **really** be used is checking close-structured (without open ends, like in our case, where
-the list can be of any length) input user data, in order to make sure, that a specific request can have only one single
-implementation in order to prevent some playing with signatures, but that is completely not an our case.
-
-Keep your functions close and vars even closer
-----------------------------------------------
-This refactoring of external message handler streamlines data flows in it, therefore avoiding unneccessary stack manipulations
-and saving some gas as a result. More precisely, the ``auth_kind`` is loaded right away from ``body`` (since it is the last
-parameter of the function, it is at the top of the stack at that moment), and data is being loaded later after the check.
-
-Refactored internal message flows, good GGC value
--------------------------------------------------
-This commit, and several other technical commits before it (not described here, since they are technical ones and do not
-affect the code) lays beginning for calculation and optimizations of **GGC** (global gas counter). While not being a direct
-target of the contest, the **GGC** is important metric, that allows to measure the tradeoff, of how optimizing contest paths
-inadversely affects all other logic of the code that is not measured. Therefore, keeping an eye on **GGC** is important for
-**sustained development** of contest paths, where optimizing them does not severely impair all other code logic.
-
-This commit, while increasing extension gas usage a little (this problem will be addressed to and solved in later commits),
-immensely decreases usage of gas in GGC, and brings it down below the GGC in initial commit. Therefore, starting at this point,
-I can strongly assert, that the optimizations of the main contest paths do not impair the other code paths and logic.
-
-restore extensions var in loop
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-First of all, ``extensions`` variable in complex handling loop was reinstated, because saving exts in cell and popping them
-off each time required a lot of gas due to recreation of cell each time.
-
-move complex logic to inline_ref
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Next, the complex dispatch request handling logic was moved off to a separate function, that is called with ``inline_ref``
-modifier. This allows to save some gas on simple cases, and **is actually a very important optimization for future**, because
-at some point in future, the *cell breaking point* where TVM Assembler decides to break cell into pieces because a critical
-point for further optimization.
-
-optimize tail loading of extensions
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The way how extensions are loaded in internal message handler is optimized so as not to load the unneccessary at that moment data.
-
-optimize preference for simple ext ops
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Simple operations initiated by extensions now do not require to load the unneccessary data from the contract.
-
-Reorganized inlining point for extension message flow
------------------------------------------------------
-Some optimizations were made to tell the compiler to break the cell at exact place by using ``inline`` and ``inline_ref`` accurately.
-
-Do not carry around params not needed (ext opt)
------------------------------------------------
-Getting the data of the contract in place, even accounting for the ``begin_slice`` is more efficient than carrying it around
-in many parameters, that forces stack shaping when crossing the function boundary, and constraints on how efficient stack
-manipulations may be, therefore all the unneccessary parameters were removed and data is extracted closer to the point
-where it is actually needed.
-
-Optimize argument order to match stack
---------------------------------------
-Some parameters were reordered to match how they are ordered in stack, so that to decrease amount of unneccessary stack operations.
-
-Swapping extn and sign order back saves some net gas
-----------------------------------------------------
-In internal message handler ``sign`` and ``extn`` message handlers were swapped back once again, since somehow, after all the
-optimizations carried out above, that order is now more efficient in terms of gas.
-
-Short-circuit optimization of LDUQ with IFNOTRET
-------------------------------------------------
-Instead of pretty complex in terms of instructions and gas FunC construct, a single ``IFNOTRET`` is used to quickly end
-execution when there are not enough bits in the slice to obtain the opcode from the internal message.
-
-Short-circuited some returns with asm
--------------------------------------
-Following the idea of the previous commit, some more operations now use ``IF(NOT)RET`` instead of conditionals to save more gas.
-
-short-circuit flags check with asm
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Flags of internal message (bounced, to be more precise) are now checked by a concise ASM function that does ``IFRET`` to
-end the execution in case a bounced message is detected.
-
-short-circuit int msg sign last check with asm
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The check of second operation can be made shorter by comparing two numbers equality and performing ``IFNOTRET`` in ASM.
-
-short-circuit ext msg sign last check with asm
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The same applies for opcode check in internal message handler.
-
-short-circuit extension dictionary check with asm
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-... and the ``success?`` result of locating the sender in the ``extensions`` dictionary.
-
-ASM-optimized simple action cases
----------------------------------
-An optimized code construct was built to replace the not-so-efficient FunC code for simple function cases. This one uses
-a specific ordering of result on the stack after executing the neccessary instructions.
-
-Optimized out more unneeded instructions if may RET
----------------------------------------------------
-An ``udict_get_or_return`` instruction was introduced that instead of returning ``success?`` alongside with the result
-returns immediately if the entry is not found in the dictionary.
-
-Also, I have noticed, that ``public_key`` is read from ``cs`` using ``~load_uint``, but that ``cs`` is not used anymore
-in the code, so saved an unneccessary ``DROP`` by using ``.preload_uint`` instead.
-
-Removed another unneccessary DROP with preload uint
----------------------------------------------------
-The same optimization for ``public_key`` loading was done in the external message handler in this commit.
-
-Reordered argument order to optimize stack operations
------------------------------------------------------
-Some arguments were reordered to save gas on stack manipulations. Also, another ``public_key`` loading was optimized (the
-last one, in the extension handler execution path).
-
-Rewritten RETALT to IFNOTJMP - less gas, more reliable
-------------------------------------------------------
-The simple actions handler was rewritten from ``IFNOT:<{ ... RETALT }>`` to ``IFNOTJMP:<{ ... }>``. This saves some gas
-(since implicit returns are cheaper), and makes the code more reliable (since we cannot be 100% sure that ``RETALT`` will
-end the execution as expected if the code will be modified in future, therefore using ``IFNOTJMP`` eliminates this uncertainity).
-
-Another argument stack optimization (psr -> dr call)
-----------------------------------------------------
-Some another reordering of function arguments was done to eliminate unneccessary stack operations.
-
-Black magic route optimization (drop some result later)
--------------------------------------------------------
-An unused result of extension dictionary checking is now carried around inside the called function in order to be dropped
-later after the simple actions checker. Surprisingly, this does not impair non-test code paths at all, since the ``DROP``
-at the end of simple actions checker is merged with drop of the carried result into ``2DROP``, thus having no drawbacks.
-
-Another black magic optimization (drop auth_kind later)
--------------------------------------------------------
-Another variable is now called around for delayed drop, this time ``auth_kind``, which turns ``2DROP`` into ``3 BLKDROP``,
-that is still not bad, increases gas efficiency on primary paths, and does not impair it on other ones.
-
-Backported FunC optimizations from entrypoint branch
-----------------------------------------------------
-Backported some FunC optimizations done in entrypoint branch (although, they may be not as efficient):
-
-Rearranged entrypoint conditions flow, compiler fix
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-External and internal message processing conditions order are swapped that result in less gas usage overall. Also, some
-mistakes in TVM Assembler are fixed and functions were renamed so as not to accidentally compile it using an ordinary compiler.
-
-some commits not affecting the main test branches
-"""""""""""""""""""""""""""""""""""""""""""""""""
-Some additional improvements to the complex dispatch case were made to decrease the global gas counters. This did not affect
-the gas usage in the main test cases, but made my optimizations for friendly to the natur... to the other code branches.
-
-Removed unneccessary exploded data parameters
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Moved data (``ds``) variables closer to their actual usage. Therefore it is not required to pass lots of those variables
-in the arguments anymore saving some gas on stack reorganizations.
-
-Moreover, this allows to move data variable code inbetween other code in ``process_signed_request`` function, saving even
-more code by optimizing order of operations.
-
-Use SDBEGINS to enforce prefix in external message
---------------------------------------------------
-I have found out a super useful ``SDBEGINS(Q)`` TVM instruction that allows to verify the prefix of a slice against another
-one (in this version of function the prefix is even conveniently embedded into the instruction code itself), and even has
-a very convenient behaviour of throwing if prefix does not match (that is very convenient for external message, since
-returning from it without accepting message is effectively the same as throwing an exception), and returns the slice without
-that prefix is correct, that perfectly matches the previous behaviour.
-
-As such, replacing compare and return with this instruction saves considerable amount of gas with no implications.
-
-Use SDBEGINSQ to check internal message prefixes
-------------------------------------------------
-The quiet version of aforementioned instruction, ``SDBEGINSQ`` exhibits even more convenient behaviour for multi-case checking
-and pipelining: on the top of the stack it puts whether the prefix matched or not, that can be consumed for any kind of condition
-checks, and always returns a slice after it. The great behaviour is that if the prefix matched the returned slice is stripped of
-it, and if the prefix did not match, the original slice is returned. This allows to use this instruction, branch into processing
-code if it matched, or use it again if did not, and keep doing that (something like a switch-case).
-
-Therefore, I have used this instruction to check for opcode prefix in internal message processing.
-
-Backport some optimizations from EP and coalesce code
------------------------------------------------------
-Backported some more optimizations from entrypoint branch
-
-Use SDFIRST instead of PLDU to check first bit
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-It is possible to use shorter ``SDFIRST`` instruction to check if first bit of slice is set, that saves some gas.
-
-I have used it in checking whether to use simple action processing code, that saves some gas in each execution branch.
-
-Check bounced flag using slices and trail bits
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-It is more efficient to get a 4-bit slice and check trailing bits with ``SDCNTTRAIL1`` (it will always be non-zero
-if last bit (bounced) is non-zero, and it always will be zero if it is zero - a perfect instruction to check the last bit).
-Therefore by such approach checking bounced flag bit is much more effective than loading 4-bit number from slice, pushing 1
-to stack, and performing the or operation.
-
-Using SDBEGINSQ to check for starting zero
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Like with internal message prefixes, it is more efficient to use a single ``SDBEGINSQ`` instruction to check that prefix
-starts with zero and is a simple action even than preload a single uint1.
-
-Optimized instructions order for extension and fix args
--------------------------------------------------------
-Adjusting order of instructions in extension branch allows to save some gas. Also fixed arguments because TON Plugin
-was complaining (no gas or instructions change whatsoever).
\ No newline at end of file
diff --git a/README.md b/README.md
index c695619c..96f866cf 100644
--- a/README.md
+++ b/README.md
@@ -1,8 +1,22 @@
-# 🔥W5: wallet v5 standard
+# W5: wallet smart contract v5
 
-This is an extensible wallet specification aimed at replacing V4 and allowing arbitrary extensions.
+New version of wallet smart contract, the previous one was [v4r2](https://github.com/ton-blockchain/wallet-contract).
 
-W5 has **25% lower fees**, supports **gasless transactions** (via third party relayers) and implements a **flexible extension mechanism**.
+The entire concept is proposed by the [Tonkeeper team](https://tonkeeper.com/).
+
+New Features:
+
+- Send up to 255 messages at once;
+
+- Signed actions can be sent not only by external message, but also by internal messages (can be used for gasless transactions);
+
+- Unlimited extensions;
+
+- Extension can prohibit signed actions in the wallet (can be used for 2fa or key recovery);
+
+- Optimizations to reduce network fees;
+
+- Better foolproofing safety - reply-protection for external messages, wallet id rethinking;
 
 ## Project structure
 
@@ -13,25 +27,63 @@ W5 has **25% lower fees**, supports **gasless transactions** (via third party re
 -   `scripts` - scripts used by the project, mainly the deployment scripts, additionally contains utilities for gas optimisation.
 -   `fift` - contains standard Fift v0.4.4 library including the assembler and disassembler for gas optimisation utilities.
 
-### Additional documentation
-
--   [Gas improvements](Improvements.rst) - a log of improvements, detailed by primary code paths, global gas counters per commit.
--   [Contest](Contest.md) - a note showing some information about interesting improvements during the optimisation contest.
-
 ## How to use
 
 ### Build
 
-`npm run build:v5`
+`npm run build`
 
 ### Test
 
 `npm run test`
 
 ### Deployment
-1. Deploy library: `npm run deploy-library`
-2. Deploy wallet: `npm run deploy-wallet`
 
-### Get wallet compiled code
+Deploy wallet: `npm run deploy-wallet`
+
+### Known issues
+
+1) Since the `valid_until` is uint32 it will not work after 2106 year. We believe new versions of wallet smart contract will be available by then.
+
+2) If the `action_send_msg` content is invalid and the sendmode has +2, the error will not be ignored. An update of the node is planned where this behaviour will be changed (with +2 sendmode and `action_send_msg` invalid content the error will be ignored).
+
+3) It would be good to do `end_parse()` for messages and contract data. But this is not done within optimisations.
+
+### Gasless flow
+
+1. When sending an USDt (or other Jetton) the user signs one message containing two outgoing USDt transfers:
+
+     * USDt transfer to the recipient's address.
+
+     * Transfer of a small amount of USDt in favor of the Service.
+
+2. This signed message is sent offchain by HTTPS to the Service backend. The Service backend checks message and sends it to the TON blockchain paying Toncoins for network fees.
+
+### Gasless known issues
+
+1) By requesting a gasless service, a user can have time to increase the seqno on his own, or via another service. 
+
+    In this case, the gasless service will incur gas costs. 
+
+    However, this is a non-scalable scenario, as it requires the user to incur gas costs as well. 
+
+    A blacklist on the service backend side solves the problem.
+
+2) The user can request a gasless service and by means of a specialised extension have time to withdraw the entire balance of Jettons without change seqno.
+
+    In this case, the Jetton transfer message from the service will encounter a balance shortage and the Toncoins attached to message will return to the user's wallet.
+
+    However, this is a non-scalable scenario, as it requires the user to incur gas costs as well. 
+
+    A blacklist on the service backend side solves the problem.
+
+### Suggested extensions
+
+1) Decentralised subscriptions. The extension can withdraw a given number of Toncoins or Jettons once in a given period.
+
+2) 2FA: Multisig extension is added, extension prohibits wallet signature;
+
+3) Key recovery: 2FA, but in multisig extension there is an option to change the control keys. Possible cooldown period when the other party can cancel the key change.
+
+4) Key compromise: An extension with a new key is added, extension prohibits wallet signature;
 
-`npm run print-wallet-code`
diff --git a/Specification.md b/Specification.md
index 8533d90e..9896b0b6 100644
--- a/Specification.md
+++ b/Specification.md
@@ -7,8 +7,6 @@ This is an extensible wallet specification aimed at replacing V4 and allowing ar
 * [Features](#features)
 * [Overview](#overview)
 * [Discussion](#discussion)
-* [Wallet ID](#wallet-id)
-* [Packed address](#packed-address)
 * [TL-B definitions](#tl-b-definitions)
 * [Source code](#source-code)
 
@@ -30,7 +28,7 @@ Thanks to [Skydev](https://github.com/Skydev0h) for optimization and preparing t
 * Extensions can perform the same operations as the signer: emit arbitrary messages on behalf of the owner, add and remove extensions.
 * Signed requests can be delivered via internal message to allow 3rd party pay for gas.
 * For consistency and ease of indexing, external messages also receive a 32-bit opcode.
-* To lay foundation for support of scenarios like 2FA or access recovery it is possible to disable signature authentication.
+* To lay foundation for support of scenarios like 2FA or access recovery it is possible to disable signature authentication by extension.
 
 ## Overview
 
diff --git a/contest.png b/contest.png
deleted file mode 100644
index ab835439..00000000
Binary files a/contest.png and /dev/null differ
diff --git a/contracts/wallet_v5.fc b/contracts/wallet_v5.fc
index 0835c9a0..83b5199c 100644
--- a/contracts/wallet_v5.fc
+++ b/contracts/wallet_v5.fc
@@ -70,7 +70,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
     ;; only `action_send_msg` is allowed; `action_set_code`, `action_reserve_currency` or `action_change_library` are not.
     cs = cs.enforce_and_remove_action_send_msg_prefix();
 
-    throw_unless(error::invalid_c5, cs.slice_bits() == 8); ;; send_mode
+    throw_unless(error::invalid_c5, cs.slice_bits() == 8); ;; send_mode uint8
     throw_unless(error::invalid_c5, cs.slice_refs() == 2); ;; next-action-ref and MessageRelaxed ref
 
     ;; enforce that send_mode has +2 bit (ignore errors) set for external message.
@@ -100,7 +100,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
     return ();
   }
 
-  ;; Loop extended actions until we reach standard actions
+  ;; Loop extended actions
   while (true) {
     int is_add_extension = cs~check_and_remove_add_extension_prefix();
     int is_remove_extension = is_add_extension ? 0 : cs~check_and_remove_remove_extension_prefix();
@@ -109,7 +109,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
       (int address_wc, int address_hash) = parse_std_addr(cs~load_msg_addr());
       (int my_address_wc, _) = parse_std_addr(my_address());
 
-      throw_unless(error::extension_wrong_workchain, my_address_wc == address_wc);
+      throw_unless(error::extension_wrong_workchain, my_address_wc == address_wc); ;; the extension must be in the same workchain as the wallet.
 
       slice data_slice = get_data().begin_parse();
       slice data_slice_before_extensions = data_slice~load_bits(size::bool + size::seqno + size::wallet_id + size::public_key);
@@ -131,7 +131,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
               .store_dict(extensions)
               .end_cell());
 
-    } elseif (cs~check_and_remove_set_signature_allowed_prefix()) {
+    } elseif (cs~check_and_remove_set_signature_allowed_prefix()) { ;; allow/disallow signature
       throw_unless(error::only_extension_can_change_signature_mode, is_extension);
       int allow_signature = cs~load_int(1);
       slice data_slice = get_data().begin_parse();
@@ -184,6 +184,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
       return ();
     }
   }
+  ;; In case the wallet application has initially, by mistake, deployed a contract with the wrong bit (signature is forbidden and extensions are empty) - we allow such a contract to work.
   throw_if(error::signature_disabled, (~ is_signature_allowed) & is_extensions_not_empty);
   throw_unless(error::invalid_seqno, seqno == stored_seqno);
   throw_unless(error::invalid_wallet_id, wallet_id == stored_wallet_id);
@@ -193,7 +194,6 @@ cell verify_c5_actions(cell c5, int is_external) inline {
     accept_message();
   }
 
-  ;; Store and commit the seqno increment to prevent replays even if the subsequent requests fail.
   stored_seqno = stored_seqno + 1;
   set_data(begin_cell()
     .store_int(true, size::bool) ;; is_signature_allowed
@@ -202,6 +202,7 @@ cell verify_c5_actions(cell c5, int is_external) inline {
     .end_cell());
 
   if (is_external) {
+    ;; For external messages we commit seqno changes, so that even if an exception occurs further on, the reply-protection will still work.
     commit();
   }
 
@@ -217,14 +218,14 @@ cell verify_c5_actions(cell c5, int is_external) inline {
 
 () recv_internal(cell in_msg_full, slice in_msg_body) impure inline {
   if (in_msg_body.slice_bits() < size::message_operation_prefix) {
-    return ();
+    return (); ;; just receive Toncoins
   }
   int op = in_msg_body.preload_uint(size::message_operation_prefix);
   if ((op != prefix::extension_action) & (op != prefix::signed_internal)) {
-    return ();
+    return (); ;; just receive Toncoins
   }
 
-  ;; bounded messages has 0xffffff prefix and skipped by op check
+  ;; bounced messages has 0xffffffff prefix and skipped by op check
 
   if (op == prefix::extension_action) {
     in_msg_body~skip_bits(size::message_operation_prefix);
@@ -257,7 +258,9 @@ cell verify_c5_actions(cell c5, int is_external) inline {
 
   }
 
-  ;; Additional check to make sure that there are enough bits for reading before signature check
+  ;; Before signature checking we handle errors silently (return), after signature checking we throw exceptions.
+
+  ;; Check to make sure that there are enough bits for reading before signature check
   if (in_msg_body.slice_bits() < size::message_operation_prefix + size::wallet_id + size::valid_until + size::seqno + size::signature) {
     return ();
   }
@@ -290,7 +293,7 @@ int get_public_key() method_id {
     .preload_uint(size::public_key);
 }
 
-;; Returns raw dictionary (or null if empty) where keys are address hashes. Workchains of extensions are same with wallet smart contract workchain
+;; Returns raw dictionary (or null if empty) where keys are address hashes. Workchains of extensions are same with wallet smart contract workchain.
 cell get_extensions() method_id {
   return get_data().begin_parse()
     .skip_bits(size::bool + size::seqno + size::wallet_id + size::public_key)
diff --git a/scripts/deployLibrary.ts b/scripts/deployLibrary.ts
index 171241be..94059f39 100644
--- a/scripts/deployLibrary.ts
+++ b/scripts/deployLibrary.ts
@@ -1,5 +1,5 @@
 import { toNano } from 'ton-core';
-import { compile, NetworkProvider } from '@ton-community/blueprint';
+import { compile, NetworkProvider } from '@ton/blueprint';
 import 'dotenv/config';
 import { LibraryDeployer } from '../wrappers/library-deployer';
 
diff --git a/scripts/deployWalletV5.ts b/scripts/deployWalletV5.ts
index ce66fbbe..47625220 100644
--- a/scripts/deployWalletV5.ts
+++ b/scripts/deployWalletV5.ts
@@ -1,6 +1,6 @@
 import { Dictionary, toNano } from 'ton-core';
 import { WalletId, WalletV5 } from '../wrappers/wallet-v5';
-import { compile, NetworkProvider } from '@ton-community/blueprint';
+import { compile, NetworkProvider } from '@ton/blueprint';
 import { LibraryDeployer } from '../wrappers/library-deployer';
 import { getSecureRandomBytes, keyPairFromSeed } from 'ton-crypto';
 
@@ -15,11 +15,11 @@ export async function run(provider: NetworkProvider) {
     const walletV5 = provider.open(
         WalletV5.createFromConfig(
             {
-                signature_auth_disabled: false,
+                signatureAllowed: true,
                 seqno: 0,
                 walletId: new WalletId({ networkGlobalId: -3 }).serialized, // testnet
                 publicKey: keypair.publicKey,
-                extensions: Dictionary.empty()
+                extensions: Dictionary.empty() as any
             },
             LibraryDeployer.exportLibCode(await compile('wallet_v5'))
         )