Ring stream permanently active. #664
-
Hey - apologies if this is a simple question, but I have a problem where as soon as I add my camera configuration into go2rtc the Ring stream is instantly turned on. I thought it was because a client was connected so I have removed all cameras and just have the camera configured in go2rtc, but still have the problem. I have added a password to ensure it go2rtc that's accessing the stream and it is. My question is have I got the correct live stream link and is it set correctly to only stream on demand? This is the config in go2rtc - when viewing the stream it connects perfectly., so just want to make sure i'm setting the correct link. streams: camera_whoop: Any advise would be great! thanks 🙏 |
Beta Was this translation helpful? Give feedback.
Replies: 7 comments 8 replies
-
It's a little difficult to judge something like this without full logs, but it looks like the correct format overall. |
Beta Was this translation helpful? Give feedback.
-
OK. I have completely disabled RTSPto WEB and my doorbell is working, but the stream will not stay off. Where can I check the persistent/on-demand options for go2rtc? |
Beta Was this translation helpful? Give feedback.
-
I'm adding this in hopes of helping anyone as frustrated as I've been. First of all, the MQTT_Ring add on is great...thanks for all your work on it. I removed RTSPtoWEB and WEBRTCCamera integrations and add-ons. Seems they weren't necessary to get my Eufy cameras working in the first place. What I think I've figured out is that the persistent stream only occurs when go2rtc is actually open (web UI?) as soon as I closed this, the persistence stopped. Now I just have to update Core and hope everything keeps working. LOL |
Beta Was this translation helpful? Give feedback.
-
Nope. That's not the answer. The streaming switch continues to turn on by itself. HELP! |
Beta Was this translation helpful? Give feedback.
-
Hey, I have the same issue. I am using the RTSP from a generic camera (ring-mqtt) and when I open the stream the connection never close and my ring doorbell stuck in ringing mode. |
Beta Was this translation helpful? Give feedback.
-
Since the weekend the same issue here. But only on two cameras which have one common denominator that I equipped them with a solar panel to charge the ring battery. Completely confused |
Beta Was this translation helpful? Give feedback.
-
I am going to close this discussion as it is not useful. In the end, there are only three answers:
Also note that the native Home Assistant live live, without go2rtc/WebRTC, will always keep the stream alive for 5 minutes after the last viewer stops, there's nothing that can be done about it. If you disconnect, wait 4 minutes, then view the stream for 1 second, the 5 minute timer will restart. Even though this has been documented in the FAQ for ages, some people still seem unaware of this. |
Beta Was this translation helpful? Give feedback.
I am going to close this discussion as it is not useful. In the end, there are only three answers:
If you restart the addon (not restarting HA or go2rtc, or something else, but restarting the ring-mqtt addon/container itself), and the stream still starts automatically, then some device is requesting a stream and it will not stop until you figure out what device is doing that. Common issues are things like not setting the image URL correctly, or having no password and some device is finding the unprotected URL and starting the stream. This is always a good troubleshooting step anyway, changing the livestream username/password and restarting the addon, since that will keep all external cl…