Cylindrical MC - Uniform source off-centre and at an angle.

[l-hemsley]

When I make a source that is off centre and at an angle to the cylindrical sample, as in;

source = mc.mcsource.UniformBeam([0.5e-3,5.0e-3],position =(-20e-3, 5e-3, 0),direction=(np.cos(2*np.pi*ang/360), np.sin(2*np.pi*ang/360),0))

Looks like this in the x-y plane

But the 2D cross section of the beam seems to be tilted - the beam should be symmetrical in the z axis I believe.

It looks like the beam is rotated somehow.

Thank you :)

[xopto]

The rotation of non-circular beams in current implementation of the UniformBeam wont be aligned with the coordinate system if the propagation direction is not along the x, y, or z axis.

A solution to this issue is to slightly modify the UniformBeam constructor to take orientation of the beam (the first axis of the ellipse) and rewrite the sampling part of the OpenCL code. Unfortunately, I don't have an example yet but will come back to you later with a snippet.

[l-hemsley]

Thanks for your quick response! I am trying to implement a slit-type uniform input off-axis and off-angle. I was thinking if nothing else works then I can just iterate over the line source though will be time consuming.