BUGS

                                   GCC Bugs

   The latest version of this document is always available at
   [1]http://gcc.gnu.org/bugs.html.
     _________________________________________________________________

Table of Contents

     * [2]Reporting Bugs
          + [3]What we need
          + [4]What we DON'T want
          + [5]Where to post it
          + [6]Detailed bug reporting instructions
          + [7]Detailed bug reporting instructions for GNAT
          + [8]Detailed bug reporting instructions when using a
            precompiled header
     * [9]Frequently Reported Bugs in GCC
          + [10]General
          + [11]Fortran
          + [12]C
          + [13]C++
               o [14]Common problems updating from G++ 2.95 to G++ 3.0
               o [15]Non-bugs
               o [16]Missing features
               o [17]Parse errors for "simple" code
               o [18]Optimization at -O3 takes a very long time
     _________________________________________________________________

                                Reporting Bugs

   Our preferred way of receiving bugs is via the [19]GCC GNATS bug
   reporting system.

   Before you report a bug, please check the [20]list of well-known bugs
   and, if possible in any way, try a current development snapshot. If
   you want to report a bug with versions of GCC before 3.1 we strongly
   recommend upgrading to the current release first.

   Before reporting that GCC compiles your code incorrectly, please
   compile it with gcc -Wall and see whether this shows anything wrong
   with your code that could be the cause instead of a bug in GCC.

Summarized bug reporting instructions

   After this summary, you'll find detailed bug reporting instructions,
   that explain how to obtain some of the information requested in this
   summary.

  What we need

   Please include in your bug report all of the following items, the
   first three of which can be obtained from the output of gcc -v:
     * the exact version of GCC;
     * the system type;
     * the options given when GCC was configured/built;
     * the complete command line that triggers the bug;
     * the compiler output (error messages, warnings, etc.); and
     * the preprocessed file (*.i*) that triggers the bug, generated by
       adding -save-temps to the complete compilation command, or, in the
       case of a bug report for the GNAT front end, a complete set of
       source files (see below).

  What we do not want

     * A source file that #includes header files that are left out of the
       bug report (see above)
     * That source file and a collection of header files.
     * An attached archive (tar, zip, shar, whatever) containing all (or
       some :-) of the above.
     * A code snippet that won't cause the compiler to produce the exact
       output mentioned in the bug report (e.g., a snippet with just a
       few lines around the one that apparently triggers the bug, with
       some pieces replaced with ellipses or comments for extra
       obfuscation :-)
     * The location (URL) of the package that failed to build (we won't
       download it, anyway, since you've already given us what we need to
       duplicate the bug, haven't you? :-)
     * An error that occurs only some of the times a certain file is
       compiled, such that retrying a sufficient number of times results
       in a successful compilation; this is a symptom of a hardware
       problem, not of a compiler bug (sorry)
     * E-mail messages that complement previous, incomplete bug reports.
       Post a new, self-contained, full bug report instead, if possible
       as a follow-up to the original bug report
     * Assembly files (*.s) produced by the compiler, or any binary
       files, such as object files, executables, core files, or
       precompiled header files
     * Duplicate bug reports, or reports of bugs already fixed in the
       development tree, especially those that have already been reported
       as fixed last week :-)
     * Bugs in the assembler, the linker or the C library. These are
       separate projects, with separate mailing lists and different bug
       reporting procedures
     * Bugs in releases or snapshots of GCC not issued by the GNU
       Project. Report them to whoever provided you with the release
     * Questions about the correctness or the expected behavior of
       certain constructs that are not GCC extensions. Ask them in forums
       dedicated to the discussion of the programming language

  Where to post it

   Please submit your bug report directly to the [21]GCC GNATS bug
   database. Only if this is not possible, mail all information to
   [22]bug-gcc@gnu.org or [23]gcc-bugs@gcc.gnu.org.

   The GCC lists have message size limits (200 kbytes) and bug reports
   over those limits will currently be bounced. If your bug is larger
   than that, please post it using the [24]GCC GNATS bug database.

Detailed bug reporting instructions

   Please refer to the [25]next section when reporting bugs in GNAT, the
   Ada compiler, or to the [26]one after that when reporting bugs that
   appear when using a precompiled header.

   In general, all the information we need can be obtained by collecting
   the command line below, as well as its output and the preprocessed
   file it generates.

     gcc -v -save-temps all-your-options source-file

   Typically the preprocessed file (extension .i for C or .ii for C++)
   will be large, so please compress the resulting file with one of the
   popular compression programs such as bzip2, gzip, zip or compress (in
   decreasing order of preference). Use maximum compression (-9) if
   available. Please include the compressed preprocessor output in your
   bug report, even if the source code is freely available elsewhere; it
   makes the job of our volunteer testers much easier.

   The only excuses to not send us the preprocessed sources are (i) if
   you've found a bug in the preprocessor, (ii) if you've reduced the
   testcase to a small file that doesn't include any other file or (iii)
   if the bug appears only when using precompiled headers. If you can't
   post the preprocessed sources because they're proprietary code, then
   try to create a small file that triggers the same problem.

   Since we're supposed to be able to re-create the assembly output
   (extension .s), you usually should not include it in the bug report,
   although you may want to post parts of it to point out assembly code
   you consider to be wrong.

   Whether to use MIME attachments or uuencode is up to you. In any case,
   make sure the compiler command line, version and error output are in
   plain text, so that we don't have to decode the bug report in order to
   tell who should take care of it. A meaningful subject indicating
   language and platform also helps.

   Please avoid posting an archive (.tar, .shar or .zip); we generally
   need just a single file to reproduce the bug (the .i/.ii preprocessed
   file), and, by storing it in an archive, you're just making our
   volunteers' jobs harder. Only when your bug report requires multiple
   source files to be reproduced should you use an archive. In any case,
   make sure the compiler version, error message, etc, are included in
   the body of your bug report as plain text, even if needlessly
   duplicated as part of an archive.

   If you fail to supply enough information for a bug report to be
   reproduced, someone will probably ask you to post additional
   information (or just ignore your bug report, if they're in a bad day,
   so try to get it right on the first posting :-). In this case, please
   post the additional information to the bug reporting mailing list, not
   just to the person who requested it, unless explicitly told so. If
   possible, please include in this follow-up all the information you had
   supplied in the incomplete bug report (including the preprocessor
   output), so that the new bug report is self-contained.

Detailed bug reporting instructions for GNAT

   See the [27]previous section for bug reporting instructions for GCC
   language implementations other than Ada.

   Bug reports have to contain at least the following information in
   order to be useful:
     * the exact version of GCC, as shown by "gcc -v";
     * the system type;
     * the options when GCC was configured/built;
     * the exact command line passed to the gcc program triggering the
       bug (not just the flags passed to gnatmake, but gnatmake prints
       the parameters it passed to gcc)
     * a collection of source files for reproducing the bug, preferably a
       minimal set (see below);
     * a description of the expected behavior;
     * a description of actual behavior.

   If your code depends on additional source files (usually package
   specifications), submit the source code for these compilation units in
   a single file that is acceptable input to gnatchop, i.e. contains no
   non-Ada text. If the compilation terminated normally, you can usually
   obtain a list of dependencies using the "gnatls -d main_unit" command,
   where main_unit is the file name of the main compilation unit (which
   is also passed to gcc).

   If you report a bug which causes the compiler to print a bug box,
   include that bug box in your report, and do not forget to send all the
   source files listed after the bug box along with your report.

   If you use gnatprep, be sure to send in preprocessed sources (unless
   you have to report a bug in gnatprep).

   When you have checked that your report meets these criteria, please
   submit it according to our [28]generic instructions. (If you use a
   mailing list for reporting, please include an "[Ada]" tag in the
   subject.)

Detailed bug reporting instructions when using a precompiled header

   If you're encountering a bug when using a precompiled header, the
   first thing to do is to delete the precompiled header, and try running
   the same GCC command again. If the bug happens again, the bug doesn't
   really involve precompiled headers, please report it without using
   them by following the instructions [29]above.

   If you've found a bug while building a precompiled header (for
   instance, the compiler crashes), follow the usual instructions
   [30]above.

   If you've found a real precompiled header bug, what we'll need to
   reproduce it is the sources to build the precompiled header (as a
   single .i file), the source file that uses the precompiled header, any
   other headers that source file includes, and the command lines that
   you used to build the precompiled header and to use it.

   Please don't send us the actual precompiled header. It is likely to be
   very large and we can't use it to reproduce the problem.
     _________________________________________________________________

                        Frequently Reported Bugs in GCC

Fortran

   Fortran bugs are documented in the G77 manual rather than explicitly
   listed here. Please see [31]Known Causes of Trouble with GNU Fortran
   in the G77 manual.
     _________________________________________________________________

C

   The following are not bugs in the C compiler, but are reported often
   enough to warrant a mention here.

   Cannot initialize a static variable with stdin.
          This has nothing to do with GCC, but people ask us about it a
          lot. Code like this:

#include <stdio.h>

FILE *yyin = stdin;

          will not compile with GNU libc (GNU/Linux libc6), because stdin
          is not a constant. This was done deliberately, to make it
          easier to maintain binary compatibility when the type FILE
          needs to be changed. It is surprising for people used to
          traditional Unix C libraries, but it is permitted by the C
          standard.

          This construct commonly occurs in code generated by old
          versions of lex or yacc. We suggest you try regenerating the
          parser with a current version of flex or bison, respectively.
          In your own code, the appropriate fix is to move the
          initialization to the beginning of main.

          There is a common misconception that the GCC developers are
          responsible for GNU libc. These are in fact two entirely
          separate projects; please check the [32]GNU libc web pages for
          details.

   Cannot use preprocessor directive in macro arguments.
          Let me guess... you wrote code that looks something like this:

  memcpy(dest, src,
#ifdef PLATFORM1
         12
#else
         24
#endif
        );

          and you got a whole pile of error messages:

     test.c:11: warning: preprocessing directive not recognized within
     macro arg
     test.c:11: warning: preprocessing directive not recognized within
     macro arg
     test.c:11: warning: preprocessing directive not recognized within
     macro arg
     test.c: In function `foo':
     test.c:6: undefined or invalid # directive
     test.c:8: undefined or invalid # directive
     test.c:9: parse error before `24'
     test.c:10: undefined or invalid # directive
     test.c:11: parse error before `#'

          Update: As of GCC 3.2 this kind of construct is always accepted
          and CPP will probably do what you expect, but see the manual
          for detailed semantics.

          However, versions of GCC prior to 3.2 did not allow you to put
          #ifdef (or any other directive) inside the arguments of a
          macro. Your C library's <string.h> happens to define memcpy as
          a macro - this is perfectly legitimate. The code therefore
          would not compile.

          This kind of code is not portable. It is "undefined behavior"
          according to the C standard; that means different compilers
          will do different things with it. It is always possible to
          rewrite code which uses conditionals inside macros so that it
          doesn't. You could write the above example

#ifdef PLATFORM1
   memcpy(dest, src, 12);
#else
   memcpy(dest, src, 24);
#endif

          This is a bit more typing, but I personally think it's better
          style in addition to being more portable.

          In recent versions of glibc, printf is among the functions
          which are implemented as macros.
     _________________________________________________________________

C++

   This is the list of bugs (and non-bugs) in g++ (aka GNU C++) that are
   reported very often, but not yet fixed. While it is certainly better
   to fix bugs instead of documenting them, this document might save
   people the effort of writing a bug report when the bug is already
   well-known. [33]How to report bugs tells you how to report a bug.

   There are many reasons why reported bugs don't get fixed. It might be
   difficult to fix, or fixing it might break compatibility. Often,
   reports get a low priority when there is a simple work-around. In
   particular, bugs caused by invalid C++ code have a simple work-around,
   fix the code. Now that there is an agreed ISO/ANSI standard for C++,
   the compiler has a definitive document to adhere to. Earlier versions
   might have accepted source code that is no longer C++. This means that
   code which might have `worked' in a previous version, is now rejected.
   You should update your code to be C++.

   You should try to use the latest stable release of the GNU C++
   compiler.

  Common problems updating from G++ 2.95 to G++ 3.0

   G++ 3.0 conforms much closer to the ISO C++ standard (available at
   [34]http://www.ncits.org/cplusplus.htm).

   We have also implemented some of the core and library defect reports
   (available at
   [35]http://anubis.dkuug.dk/jtc1/sc22/wg21/docs/cwg_defects.html &
   [36]http://anubis.dkuug.dk/jtc1/sc22/wg21/docs/lwg-defects.html
   respectively).
     * The ABI has changed. This means that both class layout and name
       mangling is different. You must recompile all c++ libraries (if
       you don't you will get link errors).
     * The standard library is much more conformant, and uses the std::
       namespace.
     * std:: is now a real namespace, not an alias for ::.
     * The standard header files for the c library don't end with .h, but
       begin with c (i.e. <cstdlib> rather than <stdlib.h>). The .h names
       are still available, but are deprecated.
     * <strstream> is deprecated, use <sstream> instead.
     * streambuf::seekoff & streambuf::seekpos are private, instead use
       streambuf::pubseekoff & streambuf::pubseekpos respectively.
     * If std::operator << (std::ostream &, long long) doesn't exist, you
       need to recompile libstdc++ with --enable-long-long.

   This means you may get lots of errors about things like strcmp not
   being found. You've most likely forgotten to tell the compiler to look
   in the std:: namespace. There are several ways to do this,
     * Say, std::strcmp at the call. This is the most explicit way of
       saying what you mean.
     * Say, using std::strcmp; somewhere before the call. You will need
       to do this for each function or type you wish to use from the
       standard library.
     * Say, using namespace std; somewhere before the call. This is the
       quick-but-dirty fix. This brings the whole of the std:: namespace
       into scope. Never do this in a header file, as you will be forcing
       users of your header file to do the same.

  ABI bugs

   3.0 had a new ABI, which affected class layout, function mangling and
   calling conventions. We had intended it to be complete, unfortunately
   some issues came to light, too late to fix in the 3.0 series. The ABI
   should not change in dot releases, so we addressed most issues in GCC
   3.1.

   Covariant return types
          We do not implement non-trivial covariant returns. We also
          generate incorrect virtual function tables for trivial
          covariance. Although trivial covariance will work, it is
          incompatible with the ABI. GNATS PR 3706 tracks this problem.

  Non-bugs

   Here are some features that have been reported as bugs, but are not.

   Nested classes can access private types of the containing class.
          G++ now implements type access control on member types. Defect
          report 45 clarifies that nested classes are members of the
          class they are nested in, and so are granted access to private
          members of that class.

   Classes in exception specifiers must be complete types.
          [15.4]/1 tells you that you cannot have an incomplete type, or
          pointer to incomplete (other than cv void *) in an exception
          specification.

   G++ emits two copies of constructors and destructors.
          In general there are three types of constructors (and
          destructors).

         1. The complete object constructor/destructor.
         2. The base object constructor/destructor.
         3. The allocating destructor/deallocating destructor.

          The first two are different, when virtual base classes are
          involved. In some cases we can do better, and this is logged in
          GNATS.

   Exceptions don't work in multithreaded applications.
          You need to rebuild g++ and libstdc++ with --enable-threads.
          Remember, c++ exceptions are not like hardware interrupts. You
          cannot throw an exception in one thread and catch it in
          another. You cannot throw an exception from a signal handler,
          and catch it in the main thread.

   Global destructors are not run in the correct order.
          Global destructors should be run in the reverse order of their
          constructors completing. In most cases this is the same as the
          reverse order of constructors starting, but sometimes it is
          different, and that is important. You need to compile and link
          your programs with --use-cxa-atexit. We have not turned this
          switch on by default, as it requires a cxa aware runtime
          library (libc, glibc, or equivalent).

   Problems with floating point computations.
          In a number of cases, GCC appears to perform floating point
          computations incorrectly. For example, the program

     #include <iostream>
     int main() {
     double min = 0.0;
     double max = 0.5;
     double width = 0.01;
     std::cout << (int)(((max - min) / width) - 1) << std::endl;
     }

          might print 49 on some systems and optimization levels, and 48
          on others.

          The is the result of rounding: The computer cannot represent
          all real numbers exactly, so it has to use approximations. When
          computing with approximation, the computer needs to round to
          the nearest representable number.

          This is not a bug in the compiler, but an inherent limitation
          of the float and double types. Please study [37]this paper for
          more information.

   Templates, scoping, and digraphs.
          If you have a class in global namespace, say named X, and want
          to give it as a template argument to some other class, say
          std::vector, then this here fails with a parser error:
          std::vector<::X>.

          The reason is that the standard mandates that the sequence <:
          is treated as if it were the token [, and the parser then
          reports a parse error before the character : (by which it means
          the second colon). There are several such combinations of
          characters, and they are called digraphs.

          The simplest way to avoid this is to write std::vector< ::X>,
          i.e. place a space between the opening angle bracket and the
          scope operator.

  Missing features

   We know some things are missing from G++.

   The export keyword is not implemented.
          Most C++ compilers (G++ included) do not yet implement export,
          which is necessary for separate compilation of template
          declarations and definitions. Without export, a template
          definition must be in scope to be used. The obvious workaround
          is simply to place all definitions in the header itself.
          Alternatively, the compilation unit containing template
          definitions may be included from the header.

   Two stage lookup in templates is not implemented.
          [14.6] specifies how names are looked up inside a template. G++
          does not do this correctly, but for most templates this will
          not be noticeable.

  Parse errors for "simple" code

   Up to and including GCC 3.0, the compiler will give "parse error" for
   seemingly simple code, such as
struct A{
  A();
  A(int);
  void func();
};

struct B{
  B(A);
  B(A,A);
  void func();
};

void foo(){
  B b(A(),A(1));     //Variable b, initialized with two temporaries
  B(A(2)).func();    //B temporary, initialized with A temporary
}

   The problem is that GCC starts to parse the declaration of b as a
   function b returning B, taking a function returning A as an argument.
   When it sees the 1, it is too late. The work-around in these cases is
   to add additional parentheses around the expressions that are mistaken
   as declarations:
  (B(A(2))).func();

   Sometimes, even that is not enough; to show the compiler that this
   should be really an expression, a comma operator with a dummy argument
   can be used:
  B b((0,A()),A(1));

   Another example is the parse error for the return statement in
struct A{};

struct B{
  A a;
  A f1(bool);
};

A B::f1(bool b)
{
  if (b)
    return (A());
  return a;
}

   The problem is that the compiler interprets A() as a function (taking
   no arguments, returning A), and (A()) as a cast - with a missing
   expression, hence the parse error. The work-around is to omit the
   parentheses:
  if (b)
    return A();

   This problem occurs in a number of variants; in throw statements,
   people also frequently put the object in parentheses. The exact error
   also somewhat varies with the compiler version. The work-arounds
   proposed do not change the semantics of the program at all; they make
   them perhaps less readable.

  Optimization at -O3 takes a very long time

   At -O3, all functions are candidates for inlining. The heuristic used
   has some deficiencies which show up when allowed such freedom. This is
   g++ specific, as it has an earlier inliner than gcc.

References

   1. http://gcc.gnu.org/bugs.html
   2. http://gcc.gnu.org/bugs.html#report
   3. http://gcc.gnu.org/bugs.html#need
   4. http://gcc.gnu.org/bugs.html#dontwant
   5. http://gcc.gnu.org/bugs.html#where
   6. http://gcc.gnu.org/bugs.html#detailed
   7. http://gcc.gnu.org/bugs.html#gnat
   8. http://gcc.gnu.org/bugs.html#pch
   9. http://gcc.gnu.org/bugs.html#known
  10. http://gcc.gnu.org/bugs.html#general
  11. http://gcc.gnu.org/bugs.html#fortran
  12. http://gcc.gnu.org/bugs.html#c
  13. http://gcc.gnu.org/bugs.html#cplusplus
  14. http://gcc.gnu.org/bugs.html#updating
  15. http://gcc.gnu.org/bugs.html#nonbugs
  16. http://gcc.gnu.org/bugs.html#missing
  17. http://gcc.gnu.org/bugs.html#parsing
  18. http://gcc.gnu.org/bugs.html#-O3
  19. http://gcc.gnu.org/gnats.html
  20. http://gcc.gnu.org/bugs.html#known
  21. http://gcc.gnu.org/gnats.html
  22. mailto:bug-gcc@gnu.org
  23. mailto:gcc-bugs@gcc.gnu.org
  24. http://gcc.gnu.org/gnats.html
  25. http://gcc.gnu.org/bugs.html#gnat
  26. http://gcc.gnu.org/bugs.html#pch
  27. http://gcc.gnu.org/bugs.html#detailed
  28. http://gcc.gnu.org/bugs.html#where
  29. http://gcc.gnu.org/bugs.html#detailed
  30. http://gcc.gnu.org/bugs.html#detailed
  31. http://gcc.gnu.org/onlinedocs/g77/Trouble.html
  32. http://www.gnu.org/software/glibc/
  33. http://gcc.gnu.org/bugs.html#report
  34. http://www.ncits.org/cplusplus.htm
  35. http://anubis.dkuug.dk/jtc1/sc22/wg21/docs/cwg_defects.html
  36. http://anubis.dkuug.dk/jtc1/sc22/wg21/docs/lwg-defects.html
  37. http://www.validlab.com/goldberg/paper.ps