You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have a bigger ZHA network running with about 100 devices and multiple smart plugs that i hoped to be able to use as routers and track the power consumption around the house.
I fear, that the network traffic the zigbee network is almost at a maximum (reports of ~85% utilization occured multiple times). I already moved the wifi away from the zigbee channel.
Besides the power report on the zigbee channel I find it hard with the standard tools to get a feeling for the traffic that is going on in the network and to distinguish actual traffic that the network generated from noise on the channel.
Is there anyway to just monitor the message or data rate of the coordinator?
Back to the routers. They are
14x TS011F by _TZ3000_gjnozsaz
3x TS011F by _TZ3000_w0qqde0g
both are using the quirk
Quirk: zhaquirks.tuya.ts011f_plug.Plug
So far I understood, that there are push messages by the devices and I think in this case it is cluster 0x0702 for which I can also read and set the respective parameters that influence the pushing of messages by the device:
min_interval: 60
max_interval: 900
reportable_change: 10
tries: 3
this seems to be only energy (kWh delivered).
The cluster 0x0b04 seems to provide the values for voltage, current and power. There is no setting for the reporting (push) interval, so I guess that these values are collected by issuing pull request, correct?
How can I influence the frequency of these pull messages? I really would love to better understand and configure the traffic on the network. Or do I misunderstand sth?
Thanks a lot for your help!
Steps to reproduce
Check the polling interval of the above mentioned smart plugs and try to change the frequency.
Expected behavior
Option to alter the polling interval per device or globally.
A monitor that reports the overall traffic and traffic by device
Screenshots/Video
Screenshots/Video
[Paste/upload your media here]
Device signature
Device signature
[Paste the device signature here]
Diagnostic information
Diagnostic information
[Paste the diagnostic information here]
Logs
Logs
[Pastethelogshere]
Additional information
No response
The text was updated successfully, but these errors were encountered:
Bug description
Hi,
I have a bigger ZHA network running with about 100 devices and multiple smart plugs that i hoped to be able to use as routers and track the power consumption around the house.
I fear, that the network traffic the zigbee network is almost at a maximum (reports of ~85% utilization occured multiple times). I already moved the wifi away from the zigbee channel.
Besides the power report on the zigbee channel I find it hard with the standard tools to get a feeling for the traffic that is going on in the network and to distinguish actual traffic that the network generated from noise on the channel.
Is there anyway to just monitor the message or data rate of the coordinator?
Back to the routers. They are
14x TS011F by _TZ3000_gjnozsaz
3x TS011F by _TZ3000_w0qqde0g
both are using the quirk
Quirk: zhaquirks.tuya.ts011f_plug.Plug
So far I understood, that there are push messages by the devices and I think in this case it is cluster 0x0702 for which I can also read and set the respective parameters that influence the pushing of messages by the device:
min_interval: 60
max_interval: 900
reportable_change: 10
tries: 3
this seems to be only energy (kWh delivered).
The cluster 0x0b04 seems to provide the values for voltage, current and power. There is no setting for the reporting (push) interval, so I guess that these values are collected by issuing pull request, correct?
How can I influence the frequency of these pull messages? I really would love to better understand and configure the traffic on the network. Or do I misunderstand sth?
Thanks a lot for your help!
Steps to reproduce
Check the polling interval of the above mentioned smart plugs and try to change the frequency.
Expected behavior
Option to alter the polling interval per device or globally.
A monitor that reports the overall traffic and traffic by device
Screenshots/Video
Screenshots/Video
[Paste/upload your media here]
Device signature
Device signature
[Paste the device signature here]
Diagnostic information
Diagnostic information
[Paste the diagnostic information here]
Logs
Logs
Additional information
No response
The text was updated successfully, but these errors were encountered: