Update HandAssemblyParts.md

Fix for issue stuartpittaway#72

ModuleV440/HandAssemblyParts.md

@@ -5,10 +5,9 @@ These parts are not usually available for assembly by JLCPCB, so you need to ord
 |Qty|Part                  |Footprint                                                 |LCSCStockCode|Part Number      |Digikey            |Mouser              |
 |---|----------------------|----------------------------------------------------------|-------------|-----------------|-------------------|--------------------|
 |1  |ATtiny841-SSU         |Package_SO:SOIC-14_3.9x8.7mm_P1.27mm                      |C219103      |ATtiny841-SSU    |ATTINY841-SSU-ND   |556-ATTINY841-SSU   |
-|4  |Ext Temp Sensor       |Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal     |C265016      |S2B-PH-K(LF)(SN) |455-1719-ND        |Not stocked         |
+|4  |JST socket (Ext Temp) |Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal     |C265016      |S2B-PH-K(LF)(SN) |455-1719-ND        |PRT-09749           |
 |1  |AVR-ISP-6             |Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm          |C65114       |                 |1849-PR20203VBDN-ND|649-1012938190601BLF|
 
-
 You will also need some JST cables to connect the controller and modules together.  
 
 These have a FEMALE JST PH 2.0 2pin connector on them and are wired "straight through", that is, pin 1 goes to pin 1, 2 to 2.
@@ -18,3 +17,4 @@ You may be able to connect two of these cables together, take a look at Amazon
 https://amzn.to/3dPgfxi
 (affiliate link)
 
+Mouser seeedstudio part number for JST connector with pigtail 713-321050009