Universal IR Blaster TV-B-Gone Firmware Version 1.5.3

Changes made in V1.5.3 compared to V1.5.2:

• Default code list changed to region codes
• Wake button without options starts transmission of region codes
• Left option button is now used for User1 code list selection, middle and right option buttons remain unchanged
• Boot configuration for left option button remains unchanged (sleep override)
• Added option to switch region on the fly without reprogramming. To switch region press and hold reset button, press and hold all option buttons together with wake button and release the reset button. When STAT led starts to glow constantly release option and wake buttons then press reset button to reboot the board. STAT led will inform about selected region as usual. One blink during boot means its set to EU, 2 blinks for NA.

Full Changelog: v1.5.2...v1.5.3

Universal IR Blaster TV-B-Gone Firmware Version 1.5.2

Changes made in V1.5.2 compared to V1.5.1:

• Fixed bug where number of starts and boots would overflow at 255

Universal IR Blaster TV-B-Gone Firmware Version 1.5.1

Changes made in V1.5.1 compared to V1.4:

• Added PalatisSoftPWM library by per1234 and Palatis
• STAT LED is now dimmable using software pwm using Timer1, frequency is currently set to 60Hz
• Added P command to set PWM value for STAT LED. Value is saved to and read from EEPROM. Possible range is from 1 to 255
• In N command mode ID of code in list can be entered to skip directly to that id and transmit that code.
• Low battery warning is now changed to STAT LED fading out 2 times.
• BAUD Rate changed from 115200 to 1000000 (1M) Baud due to high error at 115.2k. There is no baud error at 1M baud now.
• Hardware version check fail watchdog timeout is increased to 2 seconds from 15ms to prevent bootloader lockup.
• Default selected user is now User1 and not Region codes.
• Added CP2104 USB Serial Number to EEPROM and Info menu / JSON Data Query.
• Wake button now selects User1 instead of Region codes.
• Wake button + Option switch 1 now select Region codes.
• Wake button + Option switch 2 now select User2 codes.
• Wake button + Option switch 3 now select User3 codes.
• Option switch 1 during boot now turns on sleep override.
• Option switch 2 during boot now turns on debug override.
• Changed sequence of User1 codes.
• Added TV codes to User1:
  • Blueberry
  • LG
  • Tesla (classic version, not smart tv)
• Added STB codes to User1:
  • D3Mini STB

Universal IR Blaster TV-B-Gone Firmware Version 1.4

Initial release