Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

avoid led effect flashing on startup if leds desabled on startup #500

Merged
merged 1 commit into from
Feb 25, 2024

Conversation

Benoitone
Copy link
Collaborator

the autostart function for led_effect must be desabled to avoid led flashing on startup

Copy link
Collaborator

@Surion79 Surion79 left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

yes please.

@Frix-x : should be in the upcoming release. harder to change it again after it has been initially released.

@Frix-x Frix-x merged commit 69b453b into develop Feb 25, 2024
tehniemer added a commit to tehniemer/klippain that referenced this pull request Mar 19, 2024
* BTT S2DW V1.0 and similar RP2040 + lis2dw boards (Frix-x#439)

* Add Octopus Pro 1.0 MCU definition as duplicate of Octopus MCU

* fix typo in BTT_Octopus_Pro_v1.1.cfg (Frix-x#460)

* Turn on filter only if it was used during printing. (Frix-x#380)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>

* added parameters to park (Frix-x#391)

* M8P v2.0 SPI fix (Frix-x#389)


Co-authored-by: Félix Boisselier <[email protected]>

* Add per material filament sensor management (Frix-x#381)

* Remove _TIP_SHAPING from End/cancel print macros (Frix-x#357)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* Klipper SET_PRINT_STATS_INFO compatibility (Frix-x#392)


Co-authored-by: Félix Boisselier <[email protected]>

* Fix error with turning on filter only if it was used during printing. (Frix-x#406)

Fix issue discovered after merging Frix-x#380

* fix missing variable to cancel_print (Frix-x#408)

* filament sensor status checks universal (Frix-x#411)

* proper Shake&Tune integration in Klippain

* add mellow SB2040 v2 and SB2040 Pro toolhead boards (Frix-x#417)

* correct overriders misspelling (Frix-x#425)

* check if heatsoak is configured to verbose message (Frix-x#424)

* typo

* Add pin definitions for Fysetc S6 V2.X

* add TR8x2 leadscrew config for trident

* Add older version of Fysetc mini12864 display

* HappyHare & other related dev (Frix-x#371)

* HappyHare MMU integration in Klippain

* Spoolman support

* Multiple MCU templates added or modified, especially MMU templates

* LED system rework to support the LED_effects plugin and rainbow barf, etc... ( Frix-x#416 )

* TMC Autotune moonraker updater predefined config (add your motor defs to your overrides.cfg or mcu.cfg)

---------

Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: ksummers92 <[email protected]>

* fix status leds at startup (Frix-x#448)

* Status leds on startup fix

* display menu and V0 Display (Frix-x#420)

* Better display menu adapted to Klippain

* V0 display support

* Klippain boot logo

---------

Co-authored-by: Elias Huwyler <[email protected]>

* improved display management structure

* fixed MMU includes for HappyHare symlink

* Add BLTouch support (Frix-x#450)

* fixed nozzle and status led on/off.  (Frix-x#454)

* reverted update manager to main branch

* followed naming scheme for bltouch include as virtual

* moved the machine.cfg include and included additional thermistor defs

* Mellow fly super8 template (Frix-x#463)

* Support for TMC5160 on Z Axis (Frix-x#469)

* added fix to prevent issues when updating Klippain without MMU (Frix-x#462)

* Add configs for Fysetc SB Can TH boards (Frix-x#464)


Co-authored-by: Félix Boisselier <[email protected]>

* fix: make prime line height a variable parameter (Frix-x#466)

Fix Frix-x#465

* fix for extrude when temperature is too low (Frix-x#480)

* Add BTT Kraken MCU support (Frix-x#476)

* Update Fysetc_Spider_v3.x.cfg to fix fan ports (Frix-x#474)

* fix BTT_MMB pin (Frix-x#486)

* added fix for rsense for TMC5160 (Frix-x#489)

* Add support for dockable probes with separate retainer (Frix-x#401)

This is needed for probes like https://github.com/kevinakasam/KlackEnder-Probe

* fix for rsense on TMC5160 Z (Frix-x#490)

* Create stale action workflow (Frix-x#449)


Co-authored-by: Félix Boisselier <[email protected]>

* fixed K-Shake&Tune integration

* Avoid cooling hotend in extruder_preheating Frix-x#495 (Frix-x#496)

* Add a park front macro for toolhead maintenance (Frix-x#494)

* Update MMU include order to allow overriding default HH defs (Frix-x#497)

* avoid led effect flashing on startup if leds desabled on startup (Frix-x#500)

* Added BTT SKR2 board template (Frix-x#503)

* fixed the regression introduced in startup call

* fix typo in stale.yml

* fixed probe pin for BTT_SB2209_RP2040_v1.0 (Frix-x#507)

* LDO Nitehawk MCU template and tachometer management (Frix-x#505)


Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>

* update primeline to make it adaptive (Frix-x#498)


Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* fixed missing adaptive primeline variable

* remplaced CANCEL_PRINT by PARK in the automated error management gcode

* fixed typo in LDO Nitehawk manufacturer template

* Add support for Manta_M5P v1.0 and 0.9 degree steppers on Trident Z axis (Frix-x#514)

* fix homing check for PARK in error gcode (Frix-x#513)

* fix typo in Fysetc_ERCF_ERB.cfg (Frix-x#519)

* Update BTT_Kraken_v1.0.cfg, RGB1 fix

listed as PF10, but should be PF12 (pf10 is mcu_min7 already, an endstop)

verified rest of pins as well

* reverted PARK and PARK_FRONT to fail if axis are not homed

* fix PARK with overriden param E (Frix-x#515)

* install and uninstall scripts improvement (Frix-x#511)

* Don't fail uninstall if the backup folder has been removed
* Make uninstall work when backup has sub-directories
* Make sure we don't fail making a backup when there is no current user config folder

* added Mellow Fly Gemini v3 MCU template (Frix-x#527)

* fix pinout for Fysetc_ERB board (Frix-x#530)

* updated homing_override to improve sensorless homing (Frix-x#531)

by using M400 vs the old 2 second dwell time that is not required anymore

* fixed v0_display pin and improved overrides docs (Frix-x#535)

* Update rpi_temp.cfg

Format with _ so a space is in the name, like other temps

* Update cabinet_temp.cfg

* switched to the new minimum_cruise_ratio Klipper parameter

* commented the default minimum_cruise_ratio to not break older Klipper versions

---------

Co-authored-by: Gustavo Ribeiro Alves <[email protected]>
Co-authored-by: Andrew Wickham <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: Benoitone <[email protected]>
Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Arsène Thieffry <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: ksummers92 <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Neil Smith <[email protected]>
Co-authored-by: Reiner Uhry <[email protected]>
Co-authored-by: lokiagent <[email protected]>
Co-authored-by: Arcadien <[email protected]>
Co-authored-by: Tyler Olson <[email protected]>
Co-authored-by: Felix Boisselier <[email protected]>
Co-authored-by: elpopo <[email protected]>
Co-authored-by: tsk-2222 <[email protected]>
Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>
Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Birkemosen <[email protected]>
Co-authored-by: Eric <[email protected]>
Co-authored-by: Magne Rasmussen <[email protected]>
Co-authored-by: Parker <[email protected]>
ksummers92 added a commit to ksummers92/klippain that referenced this pull request Jun 22, 2024
* Fysetc Catalyst Config

* added respond on idle_timeout

* sherpa mini config (Frix-x#385)


Co-authored-by: Félix Boisselier <[email protected]>

* switch moonraker update management to dev channel (Frix-x#390)

* Update orbiter2.0.cfg (Frix-x#405)

Add comment about required current. At the default of 0.45 on the Orbiter 2 motor, very poor performance will occur including significant underextrusion on infill, etc.

* chore(mcu): properly label CAN H/L (Frix-x#418)

TX and RX are not helpful, looking at the back of the m8p v2 shows that RX is high, and TX is low.

* added back the proper idle timeout behavior

* BTT S2DW V1.0 and similar RP2040 + lis2dw boards (Frix-x#439)

* Add Octopus Pro 1.0 MCU definition as duplicate of Octopus MCU

* fix typo in BTT_Octopus_Pro_v1.1.cfg (Frix-x#460)

* Turn on filter only if it was used during printing. (Frix-x#380)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>

* added parameters to park (Frix-x#391)

* M8P v2.0 SPI fix (Frix-x#389)


Co-authored-by: Félix Boisselier <[email protected]>

* Add per material filament sensor management (Frix-x#381)

* Remove _TIP_SHAPING from End/cancel print macros (Frix-x#357)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* Klipper SET_PRINT_STATS_INFO compatibility (Frix-x#392)


Co-authored-by: Félix Boisselier <[email protected]>

* Fix error with turning on filter only if it was used during printing. (Frix-x#406)

Fix issue discovered after merging Frix-x#380

* fix missing variable to cancel_print (Frix-x#408)

* filament sensor status checks universal (Frix-x#411)

* proper Shake&Tune integration in Klippain

* add mellow SB2040 v2 and SB2040 Pro toolhead boards (Frix-x#417)

* correct overriders misspelling (Frix-x#425)

* check if heatsoak is configured to verbose message (Frix-x#424)

* typo

* Add pin definitions for Fysetc S6 V2.X

* add TR8x2 leadscrew config for trident

* Add older version of Fysetc mini12864 display

* HappyHare & other related dev (Frix-x#371)

* HappyHare MMU integration in Klippain

* Spoolman support

* Multiple MCU templates added or modified, especially MMU templates

* LED system rework to support the LED_effects plugin and rainbow barf, etc... ( Frix-x#416 )

* TMC Autotune moonraker updater predefined config (add your motor defs to your overrides.cfg or mcu.cfg)

---------

Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: ksummers92 <[email protected]>

* fix status leds at startup (Frix-x#448)

* Status leds on startup fix

* display menu and V0 Display (Frix-x#420)

* Better display menu adapted to Klippain

* V0 display support

* Klippain boot logo

---------

Co-authored-by: Elias Huwyler <[email protected]>

* improved display management structure

* fixed MMU includes for HappyHare symlink

* Add BLTouch support (Frix-x#450)

* fixed nozzle and status led on/off.  (Frix-x#454)

* reverted update manager to main branch

* followed naming scheme for bltouch include as virtual

* moved the machine.cfg include and included additional thermistor defs

* Mellow fly super8 template (Frix-x#463)

* Support for TMC5160 on Z Axis (Frix-x#469)

* added fix to prevent issues when updating Klippain without MMU (Frix-x#462)

* Add configs for Fysetc SB Can TH boards (Frix-x#464)


Co-authored-by: Félix Boisselier <[email protected]>

* fix: make prime line height a variable parameter (Frix-x#466)

Fix Frix-x#465

* fix for extrude when temperature is too low (Frix-x#480)

* Add BTT Kraken MCU support (Frix-x#476)

* Update Fysetc_Spider_v3.x.cfg to fix fan ports (Frix-x#474)

* fix BTT_MMB pin (Frix-x#486)

* added fix for rsense for TMC5160 (Frix-x#489)

* Add support for dockable probes with separate retainer (Frix-x#401)

This is needed for probes like https://github.com/kevinakasam/KlackEnder-Probe

* fix for rsense on TMC5160 Z (Frix-x#490)

* Create stale action workflow (Frix-x#449)


Co-authored-by: Félix Boisselier <[email protected]>

* fixed K-Shake&Tune integration

* Avoid cooling hotend in extruder_preheating Frix-x#495 (Frix-x#496)

* Add a park front macro for toolhead maintenance (Frix-x#494)

* Update MMU include order to allow overriding default HH defs (Frix-x#497)

* avoid led effect flashing on startup if leds desabled on startup (Frix-x#500)

* Added BTT SKR2 board template (Frix-x#503)

* fixed the regression introduced in startup call

* fix typo in stale.yml

* fixed probe pin for BTT_SB2209_RP2040_v1.0 (Frix-x#507)

* LDO Nitehawk MCU template and tachometer management (Frix-x#505)


Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>

* update primeline to make it adaptive (Frix-x#498)


Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* fixed missing adaptive primeline variable

* remplaced CANCEL_PRINT by PARK in the automated error management gcode

* fixed typo in LDO Nitehawk manufacturer template

* Add support for Manta_M5P v1.0 and 0.9 degree steppers on Trident Z axis (Frix-x#514)

* fix homing check for PARK in error gcode (Frix-x#513)

* fix typo in Fysetc_ERCF_ERB.cfg (Frix-x#519)

* Update BTT_Kraken_v1.0.cfg, RGB1 fix

listed as PF10, but should be PF12 (pf10 is mcu_min7 already, an endstop)

verified rest of pins as well

* reverted PARK and PARK_FRONT to fail if axis are not homed

* fix PARK with overriden param E (Frix-x#515)

* install and uninstall scripts improvement (Frix-x#511)

* Don't fail uninstall if the backup folder has been removed
* Make uninstall work when backup has sub-directories
* Make sure we don't fail making a backup when there is no current user config folder

* added Mellow Fly Gemini v3 MCU template (Frix-x#527)

* fix pinout for Fysetc_ERB board (Frix-x#530)

* updated homing_override to improve sensorless homing (Frix-x#531)

by using M400 vs the old 2 second dwell time that is not required anymore

* fixed v0_display pin and improved overrides docs (Frix-x#535)

* Update rpi_temp.cfg

Format with _ so a space is in the name, like other temps

* Update cabinet_temp.cfg

* switched to the new minimum_cruise_ratio Klipper parameter

* commented the default minimum_cruise_ratio to not break older Klipper versions

* added Beacon accelerometer support (Frix-x#552)

* Happy hare v2.5 merge (#8)

* make Klippain compatible with HH v2.5

* start print for HH > v2.5

* move HHv2.5 init in _KLIPPAIN_MMU_INIT

* add some info in mmu.md for 2.5

* add sync fonction with HH>2.5

* add eject slicer option for HH>2.5

* typo error

* Update end_print.cfg

Change EJECT to boolean for MMU_END

* show HH version on startup

* added custom4..9 in start_print (Frix-x#539)

* updated beeper sections (Frix-x#549)

by switching to pwm_cycle_time instead of output pin

* removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555)

* support for LDO Picobilical (Frix-x#533)

* removed M204 for SET_VELOCITY_LIMIT (Frix-x#554)

* removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553)

* added Beacon accelerometer support (Frix-x#552)

* deprecate HH<v2.5 and small typos

* removed old artifacts from TMC2240 init feature

Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead!

* error on changes in _INIT_CHECK_MMU

---------

Co-authored-by: Benoitone <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Colten Edwards <[email protected]>
Co-authored-by: Nick Danyluk <[email protected]>
Co-authored-by: Svennixx <[email protected]>

* Align hardware/mmu.cfg with upstream

* Update nozzle brushing to accomodate offset for situations in which standard nozzle brushing parameters lead to undesired interactions.

* Modify starting move prior to brush procedure to accomodate for brush_offset

* Fix brush center calculation

* Add some debugging messages

* ???

* Fixed brush stroke maths

* Removed unneccessary if statement

* Update Shake&Tune path

This is due to a change in Shake&Tune v3.0.0

---------

Co-authored-by: Surion79 <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: Benoitone <[email protected]>
Co-authored-by: Eric <[email protected]>
Co-authored-by: Devon Hazelett <[email protected]>
Co-authored-by: Gustavo Ribeiro Alves <[email protected]>
Co-authored-by: Andrew Wickham <[email protected]>
Co-authored-by: tehniemer <[email protected]>
Co-authored-by: Arsène Thieffry <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Neil Smith <[email protected]>
Co-authored-by: Reiner Uhry <[email protected]>
Co-authored-by: lokiagent <[email protected]>
Co-authored-by: Arcadien <[email protected]>
Co-authored-by: Tyler Olson <[email protected]>
Co-authored-by: Felix Boisselier <[email protected]>
Co-authored-by: elpopo <[email protected]>
Co-authored-by: tsk-2222 <[email protected]>
Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>
Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Birkemosen <[email protected]>
Co-authored-by: Magne Rasmussen <[email protected]>
Co-authored-by: Parker <[email protected]>
Co-authored-by: Svennixx <[email protected]>
Co-authored-by: Colten Edwards <[email protected]>
Co-authored-by: Nick Danyluk <[email protected]>
ksummers92 added a commit to ksummers92/klippain that referenced this pull request Jun 22, 2024
* feat: add LDO Leviathan main board (Frix-x#365)

Signed-off-by: Stefan Dej <[email protected]>

* fix fans pins in BTT_Manta_M8P_v2.0.cfg

* fix wrong LDO Leviathan cfg location

* added Octopus Pro v1.1 template (Frix-x#349) (Frix-x#367)

Co-authored-by: Jan-Gerrit Drexhage <[email protected]>

* Fysetc Catalyst Config

* added respond on idle_timeout

* sherpa mini config (Frix-x#385)


Co-authored-by: Félix Boisselier <[email protected]>

* switch moonraker update management to dev channel (Frix-x#390)

* Update orbiter2.0.cfg (Frix-x#405)

Add comment about required current. At the default of 0.45 on the Orbiter 2 motor, very poor performance will occur including significant underextrusion on infill, etc.

* chore(mcu): properly label CAN H/L (Frix-x#418)

TX and RX are not helpful, looking at the back of the m8p v2 shows that RX is high, and TX is low.

* added back the proper idle timeout behavior

* BTT S2DW V1.0 and similar RP2040 + lis2dw boards (Frix-x#439)

* Add Octopus Pro 1.0 MCU definition as duplicate of Octopus MCU

* fix typo in BTT_Octopus_Pro_v1.1.cfg (Frix-x#460)

* Turn on filter only if it was used during printing. (Frix-x#380)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>

* added parameters to park (Frix-x#391)

* M8P v2.0 SPI fix (Frix-x#389)


Co-authored-by: Félix Boisselier <[email protected]>

* Add per material filament sensor management (Frix-x#381)

* Remove _TIP_SHAPING from End/cancel print macros (Frix-x#357)


Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* Klipper SET_PRINT_STATS_INFO compatibility (Frix-x#392)


Co-authored-by: Félix Boisselier <[email protected]>

* Fix error with turning on filter only if it was used during printing. (Frix-x#406)

Fix issue discovered after merging Frix-x#380

* fix missing variable to cancel_print (Frix-x#408)

* filament sensor status checks universal (Frix-x#411)

* proper Shake&Tune integration in Klippain

* add mellow SB2040 v2 and SB2040 Pro toolhead boards (Frix-x#417)

* correct overriders misspelling (Frix-x#425)

* check if heatsoak is configured to verbose message (Frix-x#424)

* typo

* Add pin definitions for Fysetc S6 V2.X

* add TR8x2 leadscrew config for trident

* Add older version of Fysetc mini12864 display

* HappyHare & other related dev (Frix-x#371)

* HappyHare MMU integration in Klippain

* Spoolman support

* Multiple MCU templates added or modified, especially MMU templates

* LED system rework to support the LED_effects plugin and rainbow barf, etc... ( Frix-x#416 )

* TMC Autotune moonraker updater predefined config (add your motor defs to your overrides.cfg or mcu.cfg)

---------

Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: ksummers92 <[email protected]>

* fix status leds at startup (Frix-x#448)

* Status leds on startup fix

* display menu and V0 Display (Frix-x#420)

* Better display menu adapted to Klippain

* V0 display support

* Klippain boot logo

---------

Co-authored-by: Elias Huwyler <[email protected]>

* improved display management structure

* fixed MMU includes for HappyHare symlink

* Add BLTouch support (Frix-x#450)

* fixed nozzle and status led on/off.  (Frix-x#454)

* reverted update manager to main branch

* followed naming scheme for bltouch include as virtual

* moved the machine.cfg include and included additional thermistor defs

* Mellow fly super8 template (Frix-x#463)

* Support for TMC5160 on Z Axis (Frix-x#469)

* added fix to prevent issues when updating Klippain without MMU (Frix-x#462)

* Add configs for Fysetc SB Can TH boards (Frix-x#464)


Co-authored-by: Félix Boisselier <[email protected]>

* fix: make prime line height a variable parameter (Frix-x#466)

Fix Frix-x#465

* fix for extrude when temperature is too low (Frix-x#480)

* Add BTT Kraken MCU support (Frix-x#476)

* Update Fysetc_Spider_v3.x.cfg to fix fan ports (Frix-x#474)

* fix BTT_MMB pin (Frix-x#486)

* added fix for rsense for TMC5160 (Frix-x#489)

* Add support for dockable probes with separate retainer (Frix-x#401)

This is needed for probes like https://github.com/kevinakasam/KlackEnder-Probe

* fix for rsense on TMC5160 Z (Frix-x#490)

* Create stale action workflow (Frix-x#449)


Co-authored-by: Félix Boisselier <[email protected]>

* fixed K-Shake&Tune integration

* Avoid cooling hotend in extruder_preheating Frix-x#495 (Frix-x#496)

* Add a park front macro for toolhead maintenance (Frix-x#494)

* Update MMU include order to allow overriding default HH defs (Frix-x#497)

* avoid led effect flashing on startup if leds desabled on startup (Frix-x#500)

* Added BTT SKR2 board template (Frix-x#503)

* fixed the regression introduced in startup call

* fix typo in stale.yml

* fixed probe pin for BTT_SB2209_RP2040_v1.0 (Frix-x#507)

* LDO Nitehawk MCU template and tachometer management (Frix-x#505)


Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>

* update primeline to make it adaptive (Frix-x#498)


Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>

* fixed missing adaptive primeline variable

* remplaced CANCEL_PRINT by PARK in the automated error management gcode

* fixed typo in LDO Nitehawk manufacturer template

* Add support for Manta_M5P v1.0 and 0.9 degree steppers on Trident Z axis (Frix-x#514)

* fix homing check for PARK in error gcode (Frix-x#513)

* fix typo in Fysetc_ERCF_ERB.cfg (Frix-x#519)

* Update BTT_Kraken_v1.0.cfg, RGB1 fix

listed as PF10, but should be PF12 (pf10 is mcu_min7 already, an endstop)

verified rest of pins as well

* reverted PARK and PARK_FRONT to fail if axis are not homed

* fix PARK with overriden param E (Frix-x#515)

* install and uninstall scripts improvement (Frix-x#511)

* Don't fail uninstall if the backup folder has been removed
* Make uninstall work when backup has sub-directories
* Make sure we don't fail making a backup when there is no current user config folder

* added Mellow Fly Gemini v3 MCU template (Frix-x#527)

* fix pinout for Fysetc_ERB board (Frix-x#530)

* updated homing_override to improve sensorless homing (Frix-x#531)

by using M400 vs the old 2 second dwell time that is not required anymore

* fixed v0_display pin and improved overrides docs (Frix-x#535)

* Update rpi_temp.cfg

Format with _ so a space is in the name, like other temps

* Update cabinet_temp.cfg

* switched to the new minimum_cruise_ratio Klipper parameter

* commented the default minimum_cruise_ratio to not break older Klipper versions

* added Beacon accelerometer support (Frix-x#552)

* Update Shake&Tune path

This is due to a change in Shake&Tune v3.0.0

* fixed max_z bug in PARK macro

* Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578)

* Nozzle cleaning parameters update (Frix-x#569)

* add built in adxl sensor from nitehawk sb board (Frix-x#602)

* add: mcu Fystec Cheetah v3 (Frix-x#604)

---------

Signed-off-by: Stefan Dej <[email protected]>
Co-authored-by: Stefan Dej <[email protected]>
Co-authored-by: Félix Boisselier <[email protected]>
Co-authored-by: Jan-Gerrit Drexhage <[email protected]>
Co-authored-by: Benoitone <[email protected]>
Co-authored-by: Eric <[email protected]>
Co-authored-by: Devon Hazelett <[email protected]>
Co-authored-by: Gustavo Ribeiro Alves <[email protected]>
Co-authored-by: Andrew Wickham <[email protected]>
Co-authored-by: tehniemer <[email protected]>
Co-authored-by: Arsène Thieffry <[email protected]>
Co-authored-by: claudioguareschi <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Elias Huwyler <[email protected]>
Co-authored-by: Neil Smith <[email protected]>
Co-authored-by: Reiner Uhry <[email protected]>
Co-authored-by: lokiagent <[email protected]>
Co-authored-by: Arcadien <[email protected]>
Co-authored-by: Tyler Olson <[email protected]>
Co-authored-by: Felix Boisselier <[email protected]>
Co-authored-by: elpopo <[email protected]>
Co-authored-by: tsk-2222 <[email protected]>
Co-authored-by: Meindert <[email protected]>
Co-authored-by: Akash Patel <[email protected]>
Co-authored-by: Frédéric Beaucamp <[email protected]>
Co-authored-by: Birkemosen <[email protected]>
Co-authored-by: Magne Rasmussen <[email protected]>
Co-authored-by: Parker <[email protected]>
Co-authored-by: Svennixx <[email protected]>
Co-authored-by: dev-aphex <[email protected]>
Co-authored-by: Minims <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

3 participants