This is the repository the enclosure used in the Laser4DIY project.
+ CAD directory with STEP and CAD source files
+ 3dprinting directory with STL files for 3d printing
+ lasercut directory with dxf files for (metal) laser cutting
| + 1mm_steel to be cut in 1mm steel
| | + laserchamber* for the cover of the laser source
| | + laserenclosure* for the enclosure itself
| | + supply_unit for the separate supply unit
| + 2mm_aluminum to be cut in 2mm aluminum
| | + supply_unit for the separate supply unit
| + 8mm_aluminum to be cut in 8mm aluminum
| | + laserchamber* contains file for cusotom optical bread board
This hardware documentation is licensed under CERN-OHL-P v2.
Copyright FabLab München e.V. 2021.
Laser4DIY is sponsored by the Federal Ministry of Education and Research
This source describes Open Hardware and is licensed under the CERN-OHL-P v2
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-P v2 for applicable conditions