Merge pull request #872 from marionbarker/working-docs

remove loop-3- from figure names in loop-3/img folder, adjust links

docs/browser/edit-browser.md

@@ -52,7 +52,7 @@
         1. Save your changes to a patch branch
         1. Prepare lines needed for each customization and save
     * New with 3.4.x release, there are 2 ways to add customizations (use only one)
-        * See [Update LoopWorkspace](#updateloopworkspace){: target="_blank" }
+        * See [Update LoopWorkspace](#update-loopworkspace){: target="_blank" }
         * See [How to use the `patches` Folder](#how-to-use-the-patches-folder){: target="_blank" }
     * Regardless of the method, incorporate the customization with `Action 4: Build Loop`
     * (Optional): [Add Test Details to *TestFlight*](bb-update.md#add-test-details-to-testflight){: target="_blank" }

docs/browser/phone-install.md

@@ -82,7 +82,7 @@ Once the app is available in *TestFlight*, you can adjust whether it is automati
 
 Go back to the *TestFlight* app on your phone and tap on your app name in the list to see an expanded screen similar to the graphic below. The row to enable or disable automatic updates is highlighted in the graphic, which shows the feature disabled. This is recommended for all users.
 
-* If you leave automatic update enabled (default), then whenever a new build is created and uploaded to *TestFlight* , it will be installed immediately (see [Unexpected *TestFlight* Expiration](#unexpected-testflight-expiration))
+* If you leave automatic update enabled (default), then whenever a new build is created and uploaded to *TestFlight* , it will be installed immediately (see [Unexpected *TestFlight* Beta Expiration](#unexpected-testflight-beta-expiration))
 * WARNING: If you switch between Building with Browser and *Mac*, you must disable automatic update or Xcode will not be able to install to your phone
 
 ![enable or disable automatic update for Loop](img/testflight-auto-update.png){width="300"}

docs/faqs/safety-faqs.md

@@ -31,7 +31,7 @@ Be sure to do this for every *Focus* mode you use.
 
 If you do not understand the components displayed in the graphic below, please spend time reviewing the information at [Displays](../loop-3/displays-v3.md).
 
-![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](../loop-3/img/loop-3-main-annotated.png){width="450"}
+![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](../loop-3/img/main-annotated.png){width="450"}
 {align="center"}
 
 ## Carb Entry and Insulin Delivery

docs/faqs/time-faqs.md

@@ -38,7 +38,7 @@ If you have future glucose from a manual time change or just entering something
 
 The *Loop* app is very aggressive at warning you if you make this mistake. you will get a notification - even when you are in a different app. The graphic below shows the alert when you next view the *Loop* app after turning off automatic time and changing the time. Even if you respond right away, you may have at least one glucose reading in the future when you see this alert. Please [Remove Future Glucose](#remove-future-glucose).
 
-![notification displayed when automatic time is disabled on Loop phone](../loop-3/img/loop-3-omnipod-time-change.svg){width="350"}
+![notification displayed when automatic time is disabled on Loop phone](../loop-3/img/omnipod-time-change.svg){width="350"}
 {align="center"}
 
 The rest of this page is about changing time zones.

docs/loop-3/add-cgm.md

@@ -4,7 +4,7 @@ A CGM can be added from the Heads-Up-Display ([HUD](displays-v3.md#heads-up-disp
 
 The HUD will look like the graphic below if no CGM or Pump is connected with Loop:
 
-![Loop HUD when CGM and Pump have not been added](img/loop-3-hud-add-cgm-add-pump.svg){width="350"}
+![Loop HUD when CGM and Pump have not been added](img/add-cgm-add-pump.svg){width="350"}
 {align="center"}
 
 Loop can be connected to the following CGMs:
@@ -28,7 +28,7 @@ Loop can be connected to the following CGMs:
 
 To add a CGM, go to the Settings screen ⚙️, tap on `Add CGM`, and tap on your CGM.
 
-![graphic showing some of the CGMs available with Loop 3](img/loop-3-setting-add-cgm.svg){width="500"}
+![graphic showing some of the CGMs available with Loop 3](img/setting-add-cgm.svg){width="500"}
 {align="center"}
 
 If you later decide to use a different CGM type, you must first delete the CGM and then add CGM to choose the new one.
@@ -67,7 +67,7 @@ To use the Dexcom G5, G6 or ONE:
     * Do not tap, leave it alone
 * Only add the **transmitter ID** to Loop **after** it is paired with the *Dexcom app* on your phone
 
-![interface to add transmitter ID for Dexcom](img/loop-3-setting-add-dexcom.svg){width="300"}
+![interface to add transmitter ID for Dexcom](img/setting-add-dexcom.svg){width="300"}
 {align="center"}
 
 #### Where to get the Transmitter ID for Dexcom G6? 

docs/loop-3/add-pump.md

@@ -4,7 +4,7 @@ You can choose a pump from the Heads-Up-Display ([HUD](displays-v3.md#heads-up-d
 
 The HUD looks like the graphic below if no CGM or Pump is chosen:
 
-![Loop HUD when both CGM and Pump have not been added](img/loop-3-hud-add-cgm-add-pump.svg){width="350"}
+![Loop HUD when both CGM and Pump have not been added](img/add-cgm-add-pump.svg){width="350"}
 {align="center"}
 
 !!! question "Switching Pumps?"
@@ -61,7 +61,7 @@ Tap on Add Pump in the Settings screen to see pump options (shown in the graphic
 
 Tap on your Pump.
 
-![graphic showing the pumps available with Loop 3](img/loop-3-setting-add-pump.svg){width="500"}
+![graphic showing the pumps available with Loop 3](img/setting-add-pump.svg){width="500"}
 {align="center"}
 
 
@@ -73,7 +73,7 @@ Medtronic pump users - skip ahead to [Insulin Type](#insulin-type).
 
 Here are the common screens for adding Omnipod or Omnipod DASH showing the default settings. You can change the default settings later.
 
-![initial screens for pod set up to define default notifications](img/loop-3-pod-notification.svg){width="600"}
+![initial screens for pod set up to define default notifications](img/pod-notification.svg){width="600"}
 {align="center"}
 
 After you complete these screens, you select the insulin type.
@@ -86,7 +86,7 @@ For all pumps, you can choose from the insulin types below.
     * **Rapid Acting** (Novolog, Humalog, Apidra) or **Ultra Rapid** (Fiasp, Lyumjev)
     * Inhaled insulin (Afrezza) is not offered because it is not used in pumps. [Non-Pump Insulin](displays-v3.md#event-history-reservoir-and-non-pump-insulin)
 
-![initial selection for insulin used in pump](img/loop-3-add-pump-insulin.svg){width="250"}
+![initial selection for insulin used in pump](img/add-pump-insulin.svg){width="250"}
 {align="center"}
 
 To add a Omnipod DASH pump, skip ahead to [Omnipod Commom 2](#omnipod-common-2).
@@ -122,7 +122,7 @@ After selecting a RileyLink for Omnipod, all other actions for Omnipod and Omnip
 
 For Omnipod (left) and Omnipod DASH (right), you should see the `Pair Pod` screen.
 
-![pair pod screens for Omnipod and Omnipod DASH](img/loop-3-pair-pod-duo.svg){width="500"}
+![pair pod screens for Omnipod and Omnipod DASH](img/pair-pod-duo.svg){width="500"}
 {align="center"}
 
 At this point - you should hit `Cancel` (upper right of screen) and review the [Omnipod Common](omnipod.md) page before pairing a pod.
@@ -172,7 +172,7 @@ The final step is to connect your Medtronic pump to Loop.
 - Add your pump's region, color as shown in the graphic below
     * Note that some Canadian pumps use `CM` instead of `CA` for the region code.  Select `CA/CM` in the dropdown menu.
 
-![how to add country code and color for medtronic pump](img/loop-3-add-medtronic-1.svg){width="500"}
+![how to add country code and color for medtronic pump](img/add-medtronic-1.svg){width="500"}
 {align="center"}
 
 - Add your pump's 6-digit serial number as shown in the graphic below
@@ -182,7 +182,7 @@ The final step is to connect your Medtronic pump to Loop.
     - If the [Delivery Limits](therapy-settings.md#delivery-limits) (max basal and max bolus) in the pump are lower than values you entered in Loop you will see an error message: `Pump Error. Max setting exceeded`. (See note below for other reasons you might see this message.)
         - In this case, edit the values in the pump and then click `Connect` to retry.
 
-![how to enter serial number for a medtronic pump](img/loop-3-add-medtronic-2.svg){width="750"}
+![how to enter serial number for a medtronic pump](img/add-medtronic-2.svg){width="750"}
 {align="center"}
 
 !!! warning "Max setting exceeded"