mikroSDK library for FRAM click

README.md

@@ -0,0 +1,79 @@
+![MikroE](http://www.mikroe.com/img/designs/beta/logo_small.png)
+
+---
+
+# FRAM Click
+
+---
+
+- **CIC Prefix**  : FRAM
+- **Author**      : MikroE Team
+- **Verison**     : 1.0.0
+- **Date**        : jan 2018.
+
+---
+
+### Software Support
+
+We provide a library for the FRAM Click on our [LibStock](http://libstock.mikroe.com/projects/view/776/fram-click-example) 
+page, as well as a demo application (example), developed using MikroElektronika 
+[compilers](http://shop.mikroe.com/compilers). The demo can run on all the main 
+MikroElektronika [development boards](http://shop.mikroe.com/development-boards).
+
+**Library Description**
+
+
+Key functions :
+
+- ``` void fram_write(uint16_t address, uint8_t *buffer, uint16_t counter)  ``` - Function writes to sequential memory locations from buffer
+- ``` void fram_read(uint16_t address, uint8_t *buffer, uint16_t count)   ``` - Function reads sequential memory locations to buffer
+- ```void fram_writeEnable()   ``` - Function enables data writing in FRAM memory space
+
+**Examples Description**
+
+- System Initialization - GPIO and SPI module Initalization 
+- Application Initialization -Fram Driver Initialization, initialization of click by setting mikorBUS pins to
+  approprieate logic level, performing erase all and write enable functions. 
+- Application Task - Writing data to click memory and displaying the read data via UART. 
+
+
+
+```.c
+void applicationTask()
+{
+    mikrobus_logWrite("Writing MikroE to  Fram memory, from address 0x0150:",_LOG_LINE);
+    fram_write (0x0150, &wrData[0], 9);
+    mikrobus_logWrite("Reading 9 bytes of Fram memory, from address 0x0150:",_LOG_LINE);
+    fram_read(0x0150,&rdData[0],9);
+    mikrobus_logWrite("Data read: ",_LOG_TEXT);
+    mikrobus_logWrite(rdData,_LOG_LINE);
+    Delay_ms(1000);
+}
+
+
+```
+
+
+
+The full application code, and ready to use projects can be found on our 
+[LibStock](http://libstock.mikroe.com/projects/view/776/fram-click-example) page.
+
+Other mikroE Libraries used in the example:
+
+- SPI
+- UART
+
+
+**Additional notes and informations**
+
+Depending on the development board you are using, you may need 
+[USB UART click](http://shop.mikroe.com/usb-uart-click), 
+[USB UART 2 Click](http://shop.mikroe.com/usb-uart-2-click) or 
+[RS232 Click](http://shop.mikroe.com/rs232-click) to connect to your PC, for 
+development systems with no UART to USB interface available on the board. The 
+terminal available in all Mikroelektronika 
+[compilers](http://shop.mikroe.com/compilers), or any other terminal application 
+of your choice, can be used to read the message.
+
+---
+---