Sync to CICE-Consortium/main (2025-01-23)

cice.setup

@@ -1173,7 +1173,7 @@ cp ${rundir}/compile/*.{gcno,gcda} ${testname_base}/codecov_output/
 EOF
 
       cat >> ${tsdir}/report_lcov.csh << EOF
-lcov --gcov-tool gcov -c -d ${rundir}/compile -o ${testname_base}/lcov.info
+lcov --gcov-tool gcov -c --rc geninfo_unexecuted_blocks=1 -d ${rundir}/compile -o ${testname_base}/lcov.info
 if (-s ${testname_base}/lcov.info) then
   set lcovalist = "\${lcovalist} -a ${testname_base}/lcov.info"
 endif

cicecore/cicedyn/general/ice_flux.F90

@@ -1209,15 +1209,15 @@ subroutine scale_fluxes (nx_block, ny_block, &
       real (kind=dbl_kind) :: &
           ar, &   ! 1/aice
           stefan_boltzmann, &
-          Tffresh
+          Tffresh, puny
 
       integer (kind=int_kind) :: &
           i, j    ! horizontal indices
 
       character(len=*), parameter :: subname = '(scale_fluxes)'
 
       call icepack_query_parameters(stefan_boltzmann_out=stefan_boltzmann, &
-         Tffresh_out=Tffresh)
+         Tffresh_out=Tffresh, puny_out=puny)
       call icepack_warnings_flush(nu_diag)
       if (icepack_warnings_aborted()) call abort_ice(error_message=subname, &
          file=__FILE__, line=__LINE__)
@@ -1231,6 +1231,9 @@ subroutine scale_fluxes (nx_block, ny_block, &
             fsens   (i,j) = fsens   (i,j) * ar
             flat    (i,j) = flat    (i,j) * ar
             fswabs  (i,j) = fswabs  (i,j) * ar
+            ! Special case where aice_init was zero and aice > 0.
+            if (flwout(i,j) > -puny) & 
+               flwout  (i,j) = -stefan_boltzmann *(Tf(i,j) + Tffresh)**4
             flwout  (i,j) = flwout  (i,j) * ar
             evap    (i,j) = evap    (i,j) * ar
             Tref    (i,j) = Tref    (i,j) * ar

cicecore/cicedyn/general/ice_init.F90

@@ -1267,7 +1267,7 @@ subroutine input_data
          endif
          abort_list = trim(abort_list)//":1"
       endif
-      
+
       if (history_format /= 'cdf1'        .and. &
           history_format /= 'cdf2'        .and. &
           history_format /= 'cdf5'        .and. &

cicecore/cicedyn/infrastructure/ice_grid.F90

@@ -351,20 +351,20 @@ subroutine init_grid1
           trim(grid_type) == 'regional'     ) then
 
          if (trim(grid_format) == 'nc') then
-            
+
             fieldname='ulat'
             call ice_open_nc(grid_file,fid_grid)
             call ice_read_global_nc(fid_grid,1,fieldname,work_g1,.true.)
             call ice_close_nc(fid_grid)
-            
+
             ! mask variable name might be kmt or mask, check both
             call ice_open_nc(kmt_file,fid_kmt)
 #ifdef USE_NETCDF
             if ( my_task==master_task ) then
                status = nf90_inq_varid(fid_kmt, 'kmt', varid)
                if (status == nf90_noerr) then
                   mask_fieldname = 'kmt'
-               else 
+               else
                   status = nf90_inq_varid(fid_kmt, 'mask', varid)
                   call ice_check_nc(status, subname//' ERROR: does '//trim(kmt_file)//&
                                     ' contain "kmt" or "mask" variable?', file=__FILE__, line=__LINE__)
@@ -671,7 +671,7 @@ subroutine init_grid2
             enddo
          enddo
          !$OMP END PARALLEL DO
-      endif 
+      endif
 
       if (trim(grid_type) == 'regional' .and. &
           (.not. (l_readCenter))) then
@@ -799,7 +799,7 @@ subroutine kmtmask
          enddo
       enddo
       !$OMP END PARALLEL DO
-      
+
       if (my_task == master_task) then
          close (nu_kmt)
       endif
@@ -888,14 +888,14 @@ subroutine kmtmask_nc
          i, j, iblk, &
          ilo,ihi,jlo,jhi, &     ! beginning and end of physical domain
          fid_kmt                ! file id for netCDF kmt file
-      
+
       logical (kind=log_kind) :: diag
 
       real (kind=dbl_kind), dimension (nx_block,ny_block,max_blocks) :: &
          work1
 
       type (block) :: &
-         this_block           ! block information for current block          
+         this_block           ! block information for current block
 
       character(len=*), parameter :: subname = '(kmtmask_nc)'
 
@@ -905,7 +905,7 @@ subroutine kmtmask_nc
       kmt(:,:,:) = c0
 
       call ice_open_nc(kmt_file,fid_kmt)
-      
+
       call ice_read_nc(fid_kmt,1,mask_fieldname,kmt,diag, &
                         field_loc=field_loc_center, &
                         field_type=field_type_scalar)
@@ -968,7 +968,7 @@ subroutine popgrid_nc
          work_g1
 
       integer(kind=int_kind) :: &
-         varid, status      
+         varid, status
 
       character(len=*), parameter :: subname = '(popgrid_nc)'
 
@@ -981,7 +981,7 @@ subroutine popgrid_nc
       call ice_open_nc(grid_file,fid_grid)
 
       diag = .true.       ! write diagnostic info
-   
+
       !-----------------------------------------------------------------
       ! lat, lon, angle
       !-----------------------------------------------------------------

cicecore/drivers/nuopc/cmeps/ice_comp_nuopc.F90

@@ -1030,7 +1030,9 @@ subroutine ModelAdvance(gcomp, rc)
     character(char_len_long)   :: restart_date
     character(char_len_long)   :: restart_filename
     logical                    :: isPresent, isSet
+#ifndef CESMCOUPLED
     logical                    :: write_restartfh
+#endif
     character(len=*),parameter :: subname=trim(modName)//':(ModelAdvance) '
     character(char_len_long)   :: msgString
     !--------------------------------
@@ -1301,10 +1303,12 @@ subroutine ModelSetRunClock(gcomp, rc)
     character(len=256)       :: stop_option    ! Stop option units
     integer                  :: stop_n         ! Number until stop interval
     integer                  :: stop_ymd       ! Stop date (YYYYMMDD)
-    integer                  :: dtime
     type(ESMF_ALARM)         :: stop_alarm
     character(len=128)       :: name
     integer                  :: alarmcount
+#ifndef CESMCOUPLED
+    integer                  :: dtime
+#endif
     character(len=*),parameter :: subname=trim(modName)//':(ModelSetRunClock) '
     !--------------------------------
 

cicecore/drivers/nuopc/cmeps/ice_prescribed_mod.F90

@@ -6,7 +6,7 @@ module ice_prescribed_mod
   ! prescribed.  Air/ice fluxes are computed to get surface temperature,
   ! Ice/ocean fluxes are set to zero, and ice dynamics are not calculated.
   ! Regridding and data cycling capabilities are included.
-  
+
   ! Note (8/8/2024): This code is dependent on CDEPS (to input ice data).
   ! In the interests of cleaner code, drivers/nuopc/cmeps now is too.
   ! If problematic, please see https://github.com/CICE-Consortium/CICE/pull/964 for alternatives.
@@ -215,7 +215,7 @@ subroutine ice_prescribed_init(gcomp, clock, mesh, rc)
        ! If need initial cice values for coupling
        call ice_prescribed_run(idate, msec)
 #endif
-    
+
     end if  ! end of if prescribed ice mode
 
   end subroutine ice_prescribed_init

cicecore/drivers/nuopc/cmeps/ice_shr_methods.F90

@@ -926,7 +926,7 @@ subroutine alarmInit( clock, alarm, option, &
        if (chkerr(rc,__LINE__,u_FILE_u)) return
        call ESMF_ClockGetAlarm(clock, alarmname="alarm_stop", alarm=alarm, rc=rc)
        if (ChkErr(rc,__LINE__,u_FILE_u)) return
-       call ESMF_AlarmGet(alarm, ringTime=NextAlarm, rc=rc) 
+       call ESMF_AlarmGet(alarm, ringTime=NextAlarm, rc=rc)
        if (ChkErr(rc,__LINE__,u_FILE_u)) return
 
     case default

configuration/scripts/machines/Macros.derecho_gnu

@@ -11,20 +11,16 @@ FREEFLAGS  := -ffree-form
 FFLAGS     := -fconvert=big-endian -fbacktrace -ffree-line-length-none -fallow-argument-mismatch
 FFLAGS_NOOPT:= -O0
 
-ifeq ($(ICE_BLDDEBUG), true)
-  FFLAGS   += -O0 -g -fcheck=bounds -finit-real=nan -fimplicit-none -ffpe-trap=invalid,zero,overflow --std f2008
-#  FFLAGS   += -O0 -g -fcheck=all -finit-real=snan -fimplicit-none -ffpe-trap=invalid,zero,overflow
-  CFLAGS   += -O0
-endif
-
 ifeq ($(ICE_COVERAGE), true)
   FFLAGS   += -O0 -g -fprofile-arcs -ftest-coverage
   CFLAGS   += -O0 -g -coverage
   LDFLAGS  += -g -ftest-coverage -fprofile-arcs
-endif
-
-ifneq ($(ICE_BLDDEBUG), true)
-ifneq ($(ICE_COVERAGE), true)
+else
+ifeq ($(ICE_BLDDEBUG), true)
+  FFLAGS   += -O0 -g -fcheck=bounds -finit-real=nan -fimplicit-none -ffpe-trap=invalid,zero,overflow --std f2008
+#  FFLAGS   += -O0 -g -fcheck=all -finit-real=snan -fimplicit-none -ffpe-trap=invalid,zero,overflow
+  CFLAGS   += -O0
+else
   FFLAGS   += -O2
   CFLAGS   += -O2
 endif

configuration/scripts/machines/env.derecho_gnu

@@ -10,30 +10,30 @@ if ("$inp" != "-nomodules") then
 source ${MODULESHOME}/init/csh
 
 module --force purge
-module load ncarenv/23.06
+module load ncarenv/24.12
+module reset
 module load craype
-module load gcc/12.2.0
+module load gcc/12.4.0
 module load ncarcompilers
-module load cray-mpich/8.1.25
+module load cray-mpich/8.1.29
 module load netcdf/4.9.2
-#module load hdf5/1.12.2
-#module load netcdf-mpi/4.9.2
-
-module load cray-libsci/23.02.1.1
+module load cray-libsci/24.03.0
 
 if ($?ICE_IOTYPE) then
 if ($ICE_IOTYPE =~ pio*) then
   module unload	netcdf
   module load netcdf-mpi/4.9.2
-  module load parallel-netcdf/1.12.3
+  module load parallel-netcdf/1.14.0
   if ($ICE_IOTYPE == "pio1") then
     module load parallelio/1.10.1
   else
-    module load parallelio/2.6.2
+    module load parallelio/2.6.3
   endif
 endif
 endif
 
+module load lcov
+
 if ($?ICE_BFBTYPE) then
 if ($ICE_BFBTYPE =~ qcchk*) then
   module load conda
@@ -61,7 +61,7 @@ setenv OMP_STACKSIZE 64M
 setenv ICE_MACHINE_MACHNAME derecho
 setenv ICE_MACHINE_MACHINFO "HPE Cray EX Milan Slingshot 11"
 setenv ICE_MACHINE_ENVNAME gnu
-setenv ICE_MACHINE_ENVINFO "gcc 12.2.0 20220819, cray-mpich 8.1.25, netcdf4.9.2, pnetcdf1.12.3, pio1.10.1, pio2.6.2"
+setenv ICE_MACHINE_ENVINFO "gcc 12.4.0, cray-mpich 8.1.29, netcdf4.9.2, pnetcdf1.14.0, pio1.10.1, pio2.6.3"
 setenv ICE_MACHINE_MAKE gmake
 setenv ICE_MACHINE_WKDIR /glade/derecho/scratch/$user/CICE_RUNS
 setenv ICE_MACHINE_INPUTDATA /glade/campaign/cesm/development/pcwg

configuration/scripts/machines/env.perlmutter_cray

@@ -18,16 +18,16 @@ source ${MODULESHOME}/init/csh
 module load cpu
 module load PrgEnv-cray
 module unload cce
-module load cce/15.0.1
+module load cce/17.0.0
 module unload cray-mpich
-module load cray-mpich/8.1.25
+module load cray-mpich/8.1.28
 
 module unload cray-netcdf
 module unload cray-hdf5
-module load cray-hdf5/1.12.2.3
-module load cray-netcdf/4.9.0.3
+module load cray-hdf5/1.12.2.9
+module load cray-netcdf/4.9.0.9
 
-setenv NETCDF_PATH ${NETCDF_DIR}
+#setenv NETCDF_PATH ${NETCDF_DIR}
 limit coredumpsize unlimited
 limit stacksize unlimited
 setenv OMP_STACKSIZE 128M
@@ -38,7 +38,7 @@ endif
 setenv ICE_MACHINE_MACHNAME perlmutter
 setenv ICE_MACHINE_MACHINFO "HPE Cray EX AMD EPYC 7763 Milan, Slingshot-11 Interconnect"
 setenv ICE_MACHINE_ENVNAME cray
-setenv ICE_MACHINE_ENVINFO "Cray clang/Fortran 15.0.1, cray-mpich/8.1.25, netcdf/4.9.0.3"
+setenv ICE_MACHINE_ENVINFO "Cray clang/Fortran 17.0.0, cray-mpich/8.1.28, netcdf/4.9.0.9"
 setenv ICE_MACHINE_MAKE gmake
 setenv ICE_MACHINE_WKDIR $SCRATCH/CICE_RUNS
 setenv ICE_MACHINE_INPUTDATA /global/cfs/cdirs/e3sm/tcraig/cice-consortium

configuration/scripts/machines/env.perlmutter_gnu

@@ -15,19 +15,21 @@ source ${MODULESHOME}/init/csh
 #module unload PrgEnv-intel
 #module unload PrgEnv-nvidia
 #module unload gpu
+module unload darshan
 module load cpu
-module load PrgEnv-gnu
+module load PrgEnv-gnu/8.5.0
 module unload gcc
-module load gcc/11.2.0
+module unload gcc-native
+module load gcc-native/12.3
 module unload cray-mpich
-module load cray-mpich/8.1.25
+module load cray-mpich/8.1.28
 
 module unload cray-netcdf
 module unload cray-hdf5
-module load cray-hdf5/1.12.2.3
-module load cray-netcdf/4.9.0.3
+module load cray-hdf5/1.12.2.9
+module load cray-netcdf/4.9.0.9
 
-setenv NETCDF_PATH ${NETCDF_DIR}
+#setenv NETCDF_PATH ${NETCDF_DIR}
 limit coredumpsize unlimited
 limit stacksize unlimited
 setenv OMP_STACKSIZE 128M
@@ -38,7 +40,7 @@ endif
 setenv ICE_MACHINE_MACHNAME perlmutter
 setenv ICE_MACHINE_MACHINFO "HPE Cray EX AMD EPYC 7763 Milan, Slingshot-11 Interconnect"
 setenv ICE_MACHINE_ENVNAME gnu
-setenv ICE_MACHINE_ENVINFO "gnu c/fortran 11.2.0 20210728, cray-mpich/8.1.25, netcdf/4.9.0.3"
+setenv ICE_MACHINE_ENVINFO "gnu c/fortran 12.3.0, cray-mpich/8.1.28, netcdf/4.9.0.9"
 setenv ICE_MACHINE_MAKE gmake
 setenv ICE_MACHINE_WKDIR $SCRATCH/CICE_RUNS
 setenv ICE_MACHINE_INPUTDATA /global/cfs/cdirs/e3sm/tcraig/cice-consortium

configuration/scripts/machines/env.perlmutter_intel

@@ -16,18 +16,18 @@ source ${MODULESHOME}/init/csh
 #module unload PrgEnv-nvidia
 #module unload gpu
 module load cpu
-module load PrgEnv-intel
+module load PrgEnv-intel/8.5.0
 module unload intel
-module load intel/2023.1.0
+module load intel/2023.2.0
 module unload cray-mpich
-module load cray-mpich/8.1.25
+module load cray-mpich/8.1.28
 
 module unload cray-netcdf
 module unload cray-hdf5
-module load cray-hdf5/1.12.2.3
-module load cray-netcdf/4.9.0.3
+module load cray-hdf5/1.12.2.9
+module load cray-netcdf/4.9.0.9
 
-setenv NETCDF_PATH ${NETCDF_DIR}
+#setenv NETCDF_PATH ${NETCDF_DIR}
 limit coredumpsize unlimited
 limit stacksize unlimited
 setenv OMP_STACKSIZE 128M
@@ -38,7 +38,7 @@ endif
 setenv ICE_MACHINE_MACHNAME perlmutter
 setenv ICE_MACHINE_MACHINFO "HPE Cray EX AMD EPYC 7763 Milan, Slingshot-11 Interconnect"
 setenv ICE_MACHINE_ENVNAME intel
-setenv ICE_MACHINE_ENVINFO "ifort 2021.9.0 20230302, Intel oneAPI DPC++/C++ 2023.1.0 (2023.1.0.20230320), cray-mpich/8.1.25, netcdf/4.9.0.3"
+setenv ICE_MACHINE_ENVINFO "ifort 2021.10.0 20230609, Intel oneAPI DPC++/C++ Compiler 2023.2.0 (2023.2.0.20230622)), cray-mpich/8.1.28, netcdf/4.9.0.9"
 setenv ICE_MACHINE_MAKE gmake
 setenv ICE_MACHINE_WKDIR $SCRATCH/CICE_RUNS
 setenv ICE_MACHINE_INPUTDATA /global/cfs/cdirs/e3sm/tcraig/cice-consortium

configuration/scripts/tests/cice.lcov.csh

@@ -14,7 +14,7 @@ cp -p -r ${lcovhtmldir} ${lcovrepo}/
 
 cd ${lcovrepo}
 set covp0 = `grep message coverage.json | cut -d : -f 2 | cut -d \" -f 2 | cut -d % -f 1`
-set covp  = `grep -i headerCovTableEntry ${lcovhtmldir}/index.html | grep % | head -1 | cut -d \> -f 2 | cut -d % -f 1`
+set covp  = `grep -i headerCovTableEntry ${lcovhtmldir}/index.html | grep % | head -1 | cut -d \> -f 2 | cut -d \& -f 1`
 set covpi = `echo $covp | cut -d . -f 1`
 
 set lcovhtmlname = "${covpi}%:${report_name}"