Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
* FOCAL Updates (#64) * Update headers * fix bullets * make uppercase * Update turbine.py (#56) * Update turbine.py This add several lines for fixing the problem of repeated maximum values in the performance tables. This will cause the error (' the length of x and y is different.') of 'interpolate.interp1d.' * Add comments and catch when there are multiple optimal pitch angles Co-authored-by: dzalkind <[email protected]> * increment version * Update for OpenFAST v3.0.0 * Update for OpenFAST v3.0.0 * Install OF3.0.0 for tests * update for OF v3.0.0 * add publish to pypi on release * Update to ROSCO v2.3.0 * Update Testing (#58) * Update scripts to run on eagle * Update IEA-15MW semi example: use peak shaving w/ ps_percen=0.8 * Add comparison plots to testing scripts * Update submit script for testing * Update for latest eagle runs * Add future to install dependencies * add TMax to self, define tmin in print_results * run tests in CI * generic ROSCO path * default to overwrite * fix path * import platform * separate run_testing * cleanup, specify lite test * don't run testing in after examples, oops. Co-authored-by: nikhar-abbas <[email protected]> Co-authored-by: Nikhar Abbas <[email protected]> * increment version * Update for OpenFAST v3.0.0 * Install OF3.0.0 for tests * update for OF v3.0.0 * add publish to pypi on release * Update to ROSCO v2.3.0 * Increment Version, OF3.0 (#57) * increment version * Update for OpenFAST v3.0.0 * Install OF3.0.0 for tests * update for OF v3.0.0 * add publish to pypi on release * Update to ROSCO v2.3.0 * increment version * Update for OpenFAST v3.0.0 * Install OF3.0.0 for tests * update for OF v3.0.0 * add publish to pypi on release * Update to ROSCO v2.3.0 * add ROSCO without submodule * move ROSCO source to ROSCO folder * Move cmake-related files to ROSCO * Add back pesky ErrVar * Remove parameters_files * Merge ROSCO and _toolbox gitignore * Fix .gitignore * Remove Examples/DISCON.IN from git * Fix and point example_01 to Tune_Cases/ * Update verbiage around using ofTools vs. weis * Fix and point example_04 to Tune_Cases/ * Clean up example_06 * Clean up example_07 * Only check FlpCornerFreq if using Flp control, fixes example 05 * Make example_04 consistent with others * Let example_05 run independently from 04 * Clean up example_05, wind files * Add schema and update empty tuning yaml inputs, not connected yet * Integrate schema into turbine, controller, and examples * Only check Fl filter parameters if Fl_Mode > 0, fix example_05 * bump version to 2.3 * Compile ROSCO from ROSCO dir * Rename to CI_rosco * Add omega vs. windspeed functionality * Fix tests: 5MW U_pc and 06 example dir * Make _Toolbox vs_minspeed in rotor frame to match ROSCO * Revert ServoDyn change * change rotor speed constraint to be epsilon * rename for clarity * docs major refresh * fix FA_AccF units in debug file * docs that build locally * Deallocate arrays in ROSCO, check in example_05 * Clean up comments * remove gitmodules * furo theme * furo in requirements * move readthedocs config file, remove furo import in conf.py * add docs requirements file * typo * move index out of source folder * trying to get furo to work * import date * fix versions and titles, cleanup readthedocs requirements * typo fix, remove extras * more cleanup * bump version * no furo extension, "hack" to load RT version * proper toctree paths * specify method * add mock modules * fix typos * update python install requirements * running locally * move index to main docs dir again * update to build locally * error during warnings * automated version * cleanup * remove old docs * re-add docs * simplify * fix figure path * try alabaster * remove archived docs * Add omega vs. windspeed functionality * Fix tests: 5MW U_pc and 06 example dir * more detailed sp.optimize settings * run MBC3 in parallel * restructure driver, run initialization doe for tuning * Try new dlclose function * Update example_05 to run simple simulation twice and check result * Revert deallocation stuff * Close discon library after every sim run * Test examples on macOS and windows * Run examples instead of testing on other platforms * Skip examples in windows for now * update paths and yaml load funciton * Skip mac testing of examples * provide default U_pc for single omega/zeta case * allow for float or list-like pc tuning inputs * Change name in setup.py * WE_Vw unit fix * Pass through kp_float, if desired * Minor fixes: schema error and InputReader defaults * cleeanup for improved stability * check for doe_logs as string in load_DOE * major restructure for rsched_driver class * cleanup verbosity * run serial by default * load_parallel as linturb_option * specific IEA15MW yaml for multi omega * remove unused module imports * fix error message types * lin_file as input * add comments on inputs to LinearTurbineModel init method * remove relative file paths * provide OpenFAST linearizations for IEA15MW UMaineSemi * put plotting in specific function * fix WE_lambda units * add self in on a few necessary variables * creaete example 12 for robust scheduling * try a few mbc3 locations for import * allow list-like or numpy arrays for omega_pc and zeta_pc schedules * create and use recorder setup function * Pass Through Kp_float (#57) * Pass through kp_float, if desired * Minor fixes: schema error and InputReader defaults * fix setup_recorder to work for optimization driver too * Allow pass through of Kp_float = 0 * cleanup om problems, update om0 calc * doe levels as input * negative k_float to account for OF conventions * cleanup print statements * variable name cleanup, use calculated k_float * Add defaults to omega_,zeta_ pc and vs, allow to be numbers * use standard tuning k_float as IC * formatting update * update problem setup methods * cleanup add_dv, enable adding design variables after problem is setup * change optimization step size * more setup restructure * update verbosity * use sphinx-rtd-theme * master doc and sphinx rtd theme * index back to root folder * only ignore install folders * remove hidden toctree * furo theme * update paths * convert rt version to string * update sphinx settings * move conf * furo theme * Mostly a docs update (#61) * rename for clarity * docs major refresh * fix FA_AccF units in debug file * docs that build locally * remove gitmodules * furo theme * furo in requirements * move readthedocs config file, remove furo import in conf.py * add docs requirements file * typo * move index out of source folder * trying to get furo to work * import date * fix versions and titles, cleanup readthedocs requirements * typo fix, remove extras * more cleanup * bump version * no furo extension, "hack" to load RT version * proper toctree paths * specify method * add mock modules * fix typos * update python install requirements * running locally * move index to main docs dir again * update to build locally * error during warnings * automated version * cleanup * remove old docs * re-add docs * simplify * fix figure path * try alabaster * remove archived docs * use sphinx-rtd-theme * master doc and sphinx rtd theme * index back to root folder * only ignore install folders * remove hidden toctree * furo theme * update paths * convert rt version to string * update sphinx settings * move conf * furo theme * Pass through Kp_float = 0 (#59) * Pass through kp_float, if desired * Minor fixes: schema error and InputReader defaults * Allow pass through of Kp_float = 0 * Add flp parameters to schema * Change Fl_Mode default to 0 * Add defaults to omega_,zeta_ pc and vs, allow to be numbers * Allow single pitch tuning values in code, default U_pc to 0 * use nac acceleration for floating feedback * Fix TSR saturation for region 2.5operation * Modify system for constant power operation * Only modify pole for constant power above-rated * Remove GenEff from K calc * Update tuning, use constant power * use load_rosco_yaml * constant power * Fix broken tests * Include Fl_Mode=2 for nacelle pitching feedback * Add FOCAL inputs - hpf on floating feedback - lpf on wind speed estimator - associated schema updates * Set notch and check frequencies when Fl_Mode = 1 (fixes bug) * Skip filter step if there's an error * Update IEA-15MW test case DISCON with focal inputs * Allow Fl_Mode = 2 in ROSCO * Pass through lpf frequency * Add FOCAL tuning yaml * Set Cp contour number of levels * Add FOCAL params to various writers * Update/tune focal yaml * Add scripts for running FAST, tuning various parameters and cases * Add notebook for FAST plotting * Set up step case for testing * Change doubles to C_doubles * Define real and integer kinds, assign to all of ROSCO * Add ADJUSTL to DISCON error message * Fix Fl_Mode == 2 * Fix Fl_Mode == 2 again * Call yaw, flap, and debug only if enabled in DISOCN.IN * Make avrSWAP a ReKi and set constant kinds * Add DISCONs for testing - revert this later * Fix DISCON comparison, before DISCON's were overwritten by model * Rename DEBUG2.dbg to RootName.dbg2 * Update TestCase DISCONs to new input file * Add API change page in docs * Add link to API change on main page * Fix table headers * Fix title underlines * Fix tables again * Fix tables again * Fix version numbering in docs * Simplify FAST_directory in run_FAST * Versioning (#65) * use sphinx-rtd-theme * master doc and sphinx rtd theme * index back to root folder * only ignore install folders * remove hidden toctree * furo theme * update paths * convert rt version to string * update sphinx settings * move conf * furo theme * remove git versioning from cmake * use hard coded rosco_version * update intro write method * set nowrap for intel compilers * Add transfer of error message and clear message after each call * update install instructions * Catch nans in ROSCO at end of WSE * fix conda install typo * cleanup docs * Rename DEBUG2.dbg to RootName.dbg2 * Fix Fl_Mode == 2 * Fix Fl_Mode == 2 again * Allow Fl_Mode = 2 in ROSCO * Set notch and check frequencies when Fl_Mode = 1 (fixes bug) * Update FOCAL tuning yaml * Update TSR * Clean up and doc fix * Remove publish to pypi * Define all constant inputs to functions with kind typing * Generate Test_Case/ inputs automatically * Fix IEA15 DISCON path * Fix example 11 paths * Auto-generate tuning input yaml using schema * Add toolbox_input to doc index * Add toctree * Re-name title of toolbox_input Co-authored-by: Nikhar Abbas <[email protected]> Co-authored-by: Xianping Du <[email protected]> Co-authored-by: nikhar-abbas <[email protected]> * update listcheck method for numpy arrays * Open Loop Control (#98) * create rosco types yaml * Add more descriptions, add integer_c default, cleanup * updates for allocatability and shapes * python scripts to write ROSCO_types.f90 * reemove superfulous modules * use types from ROSCO registry * create rosco types yaml * Add more descriptions, add integer_c default, cleanup * updates for allocatability and shapes * python scripts to write ROSCO_types.f90 * reemove superfulous modules * use types from ROSCO registry * Saturate inputs to WSE. Needs some TLC, but seems to work * Reduce saturation limits on speed, torque * Re-organize, set saturation limits. Working at 3 m/s * Initial add of OL control to ROSCO: builds * Update DISCONs with open loop inputs * Fix file reading for OL_Filename * Add open loop control generation and file writing * Use DISCON_dict for more manageable DISCON file writing * Add open loop example, fix constant timeseries * Make open loop example generate power * Handle relative paths and calling from outside the run directory: - Some helper functions borrowed from OpenFAST, f/ext_control - Updated file writing * Clean up: versions, print statements * Fix SysFiles paths in CMakeLists * Tidy up Ext_DLL names * More Ext_DLL name tidying * Test write_registry.py * Update for OL Control * Move preprocessor lines * add zenodo DOI * Regenerated Types * fix shape * revert filepath change * give all types a size, ProcAddr size = 3 * update types * test registry in compile step * specify default shell * update write_registry path * remove default shell * Document API changes, provide OL input example * Fix example 14 (yaw input) * Add error catching to yaw control * Tidy up OL_Input Reading: error catching, generalize * More yaw control fixes, to model * Checkout develop CMakeLists for ROSCO * Update DISCON.INs for TestCases/ * Revert "Checkout develop CMakeLists for ROSCO" This reverts commit 87a4913. * Revert windows cmake stuff to develop * Fix CMake again * Revert "Revert windows cmake stuff to develop" This reverts commit 39df122. * Make last cmake fix - hopefully Co-authored-by: Nikhar Abbas <[email protected]> * Restart & registry (#99) * Convert WE saved variables to WE type * Put restart flag in localvars * Use saved filter params from LocalVar * save pitcomt last * Move IPC saved variables to localvars * Saved pi controller variables to localvar * Save RootMyb_Last to localvar * ROSCO_IO - initial commit. Include restart and debug functions * Use ROSCO IO and call restart functions * Remove debug from function.f90 * Save ACC Infile info * update for restart capabilities * add rosco_io with restart and debug functions * cleanup debug call * use registry generate types and IO * delete DFController * fix timestep mismatch * remove unnecessaray istatus check * close files * add reg test for restart * add restart option to run_openfast * add testing to CI, ignore generate files * fix fastcall * remove extra commas * specify gfortran-10 * testing flag cleanup * Use lv_strings to generate debug output * Revert "testing flag cleanup" This reverts commit 6f29556. * Revert "specify gfortran-10" This reverts commit 4c31544. * minor cleanup * Use kind from constants * Add some comments for clarity * put debug in if statements * separate reg tests from oother tests * Fl_Mode>0 * Remove hard coded values * Add filtered signals and WE_Vw to debug varrs * cd for regtest * Check logging level before calling debug * add fl_pitcom and pc_minpit to debugvars Co-authored-by: dzalkind <[email protected]> * Break up if statement in open loop pitch (#100) * Break up if statement in open loop pitch * Make torque and yaw consistent with pitch: can start after some time * add bld edgewise freq to robust dict_inputs * Fix ccrotor inputs (#104) * remove interpolation of blade chord and twist * rename aerodynblade inputs * Update surface and DISCON.INs * Fix performance table paths * Allow default inputs (#110) * Allow defaults for AeroDyn inputs * Allow AeroDyn inputs to be floats, too * ipc (#105) * remove interpolation of blade chord and twist * rename aerodynblade inputs * Update surface and DISCON.INs * Fix performance table paths * Add proportional control and cleanup IPC * Add IPC and filtered RootMyc to registry * Better logic for filtering RootMOOP and fix notch filter slopes bug * Add cyclic flap conrol * Fix comments in ColemanTransformInverse * Addd IPC_KP to DISCON.IN * Error checking foro flp or ipc * add mutichannel plotting with tuples * add CMakeFiles to gitignore * Add IPC_KP to api changes * numerical qualifiers for error handling * add IPC gains to schema for pass-through ability * fix variable names * fix ipc gain printing bug * make sure IPC_KP is positive * Update Polars to point to coord files * ignore dbg2 files * Add IEA15MW_OL.yaml * update coord reader/writer * expand pitch_initial to 30 degrees * Add example 13 for IPC * Update cp surfaces and DISCONS * add examples to readme * cleanup and streaamline run_examples * Add IPC tuning vars * Allow IPC to command pitch value below peak shaving saturation limit * shorten simulation time * Fix Material parameter path * Update DISCONs again * Fix OL_Input reading * Set wind speed, rotor speed IC in example 14 * Debug OL reading * Add more debugging lines * Add more debugging lines 2 * Clean up, hone in on debug call * Disable logging level * Update discons - resolve conflict * Print when finished with ROSCO * add control packageg * Use PriPath and RootName to name dbg files * Print AvrSWAP * Revert "Use PriPath and RootName to name dbg files" This reverts commit 062fcaa. * Disable other examples * Print OL inputs * Allow logging level 3 * Print OL inputs * Make example shorter * Print more stuf * Print shape * Revert "Print OL inputs" This reverts commit 8e2a642. * Update ROSCO Simulink model with IPC example * refactor flap tuning for normalization methods * improved flap controller filtering * delete extra F_FlpCornerFrerq * Update inputs, reader, and writer for OF 3.1.0 * Make sigma default interp type for multi_sigma * Use openfast 3.1.0 in CI * Fix leak...maybe * Use OF 3.1.0 in testing * Use gfotran for compile * Clean up print statements * Re-enable all examples * Update NREL-5MW AD file * Only check airfoil controls if more than one table * Update BAR models * Revert "Use gfotran for compile" This reverts commit 5a6e2b7. * Install pyFAST for CI * Fix some paths in ex12 * Disable example 12 * Fix example 12 linear path, re-enable * Skip compilers install for mac * Try gfortran-9, no compilers * Try gfortran-10, no compilers * Skip windows compile in pytools * Re-enable windows, use gfortran as FC * Unset FC in windows * Set environment for windows when dependencies installed * Try setting environment in installation * Put conditional env setting in correct place * Try in setup again * Break up tasks: Windows vs. not * Update DISCONs * Update docs with new variables * Add example documentation * Update ROSCO Simulink model for 3.1.0 * Make IEA model float again * Reduce IEA timestep * Match DT to checkpoint time Co-authored-by: dzalkind <[email protected]> * Increment version number * Bladed docs (#116) * Added image of Bladed control screen setup * Delete Bladed control screen.png * Adding image of Bladed control screen * Add files via upload * Minor edit 1 * Minor change 2 * Minor change 3 * Minor change 4 * Change 6 * Change 7 * Change 8 * Minor change 9 Co-authored-by: nikhar-abbas <[email protected]> Co-authored-by: WillC-DNV <[email protected]> * Update version in API change docs * Bladed readthedocs (#117) * Added image of Bladed control screen setup * Delete Bladed control screen.png * Adding image of Bladed control screen * Add files via upload * Minor edit 1 * Minor change 2 * Minor change 3 * Minor change 4 * Change 6 * Change 7 * Change 8 * Minor change 9 * Tinker with characters in bladed instructions * Add bladed instructions to index * Change bladed toctree label * Do underline stuff * Make toctree label same as file * Remove colons from headers Co-authored-by: nikhar-abbas <[email protected]> Co-authored-by: WillC-DNV <[email protected]> * Update docs to reflect CI process Co-authored-by: Nikhar Abbas <[email protected]> Co-authored-by: Xianping Du <[email protected]> Co-authored-by: nikhar-abbas <[email protected]> Co-authored-by: WillC-DNV <[email protected]>
- Loading branch information
5 people
authored
Apr 1, 2022
1 parent
9646dbd
commit ad15bcd