[RFC 0148] Pipe operator #148

piegamesde · 2023-05-23T18:24:10Z

Discussion notice: please try to attach all discussions to a thread by using the code review feature. If your comment doesn't refer a specific line to attach to, use the header line instead.

nixos-discourse · 2023-05-23T18:24:30Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/pre-rfc-pipe-operator/28387/3

roberth

Nix is already considered to be overly complex by many. Of course we know that Nix solves hard problems and can't do so without exposing intrinsic complexity, but this needed complexity is already more than most people expect to have to deal with, coming from the broken but "easy" traditional methods.

This makes the addition of accidental complexity to Nix disproportionately harmful. It makes newcomers more likely to reject Nix, depriving themselves of a real solution to their packaging and deployment problems, while depriving us from valuable contributions.

I am opposed to the pipe function, and skeptical of a function application operator; especially one that reverses the evaluation order compared to normal function application.

rfcs/0148-pipe-operator.md

roberth · 2023-05-25T11:18:17Z

rfcs/0148-pipe-operator.md

+
+## `builtins.pipe`
+
+`lib.pipe`'s functionality is implemented as a built-in function.


pipe is not a good function because the order is not obvious. It's already available practically everywhere as lib.pipe. It's also hardly ever used, so doing this for performance strips it of the last argument for making it a builtin.

Builtins need to satisfy more stringent requirements, they take resources from the Nix team, and they can never be changed or removed.

I would recommend to always use a library, which can change things arbitrarily, thanks to being locked or pinned.

It's also hardly ever used

I think this is due to documentation issues rather than due to this function itself being bad. While it has a lot of potential of misuse, it can actually make code more readable if you put in the effort for your code to be readable from top to bottom.

I would recommend to always use a library, which can change things arbitrarily, thanks to being locked or pinned

This... makes sense, but then I'd make an argument that parts of nixpkgs.lib that manipulate generic data should exist outside of builtins and outside of nixpkgs - in a separate repository. It is not weird: we already have library flakes like flake-utils or flake-parts.

This discussion is outside of the scrope of this RFC, though; I merely disagree that lib.pipe not seeing much usage is due to technical reasons.

Shepherds currently believe this conversation is resolved, outcome: inclined to leave pipe in lib.

pipe is not a good function because the order is not obvious.

@roberth for what it’s worth, the commit where I introduced it has a rationale for the order in its message.

It's not a problem with your contribution, but with the constraints of the Nix syntax.

lib.pipe is a necessary step, and its adoption shows that it is useful to many, so thank you for creating it!

rfcs/0148-pipe-operator.md

roberth · 2023-05-25T11:35:13Z

rfcs/0148-pipe-operator.md

+## Change the `pipe` function signature
+
+There are many equivalent ways to declare this function, instead of just using the current design.
+For example, one could flip its arguments to allow a partially-applied point-free style (see above).


I think you could call this curried style.
While it is point free in the technical sense of not having a variable name to carry the data flow, point-free is generally only used in a context where higher order functions are used for more arbitrary data flows. For many, it also carries the connotation of the synonymously used pointless style.

I've never heard that term and the resources I've read so far all talked about "point-free" programming style. Google does not seem to know much either, so some links would be appreciated.

The flipped pipe function is just function composition on a list, eta expanded. Eta expansion / reduction do not change the meaning, so these two functions would be indistinguishable.

That means that we can divide the problem and drop some unnecessary terminology.

pipe = flip composeFunctions (and composeFunctions = flip pipe by virtue of a flip law)

composeFunctions is isomorphic to pipe

composeFunctions returns a function, which makes it easier to use where a function is expected: the application of higher order functions such as map.

A lot of that is just overly formal thought. Instead we can simplify this section to:

flip pipe is equivalent to function composition applied to a list. By using a function that composes a list of functions instead of pipe, we get back a function, which can be readily used in higher order functions such as map.

point-free is also point-less, in a semantic sense 😛

Shepherds currently believe this conversation can be resolved by accepting or rejecting the suggestion below.

rfcs/0148-pipe-operator.md

piegamesde · 2023-05-25T12:50:17Z

I am very well aware of the language's complexity. I am also aware of the fact that some of its users are very technical and into functional programming languages, and for many others this is a first contact with these concepts.

This is why I suggest picking only one of these operators as a compromise. I don't have any overly strong preferences here, but I make a point against function composition instead of argument piping, because the former leads to the so-called "point-free" programming style which tends to be more confusing for new users. I picked |> because of its similarity to the existing lib.pipe and the |> operator in Nickel, but if you are concerned about reversing control flow, then <| is a viable alternative too.

I strongly oppose calling this proposal "accidental" complexity. I spent a lot of time thinking about the options and trying to balance expressiveness and complexity, finding a compromise that makes solving real Nix problems easier. The Nix language is full of weird quirks users eventually have to face: we even have a wiki article collecting such instances, and it is far from exhaustive. Feel free to call these accidental complexity. But nothing about this proposal is accidental.

roberth · 2023-05-25T13:13:40Z

To be clear, I don't use accidental to describe this RFC. I only used it in accidental complexity, which I've used as a synonym for extrinsic complexity. I can see that you've put a lot of thought into it, and I respect that, but that does not necessarily make the change a net positive.

expressiveness

A language with more syntax may be easier to write, but is not more expressive unless the syntax comes with semantics that were not already covered by existing features and combinations of them.

makes solving real Nix problems easier.

What is a real Nix problem? At least the lack of a syntax won't end up on the quirks page.

Are the quirks a problem? Probably. I'd be happy to see a proposal that simplifies the language or makes the syntax easier to learn, but those are hard problems with a lot of inertia, and up-front costs that aren't "repaid" for years into the future.
Pragmatically, I think the real Nix problems aren't in the syntax. We might reach a stage where we could simplify the syntax and possibly redo it to make it more accessible to people who use more commonplace languages. That's not in the coming five years though, unless we radically expand the Nix team, which is rather resource constrained today.

suhr · 2023-05-25T13:26:31Z

Nix is already considered to be overly complex by many.

And more people consider Nix awkward to read and write rather than being complex. Mostly because the standard library is poor and not discoverable.

|> would definitely make Nix less awkward to use.

nixos-discourse · 2023-05-25T23:51:39Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/pre-rfc-pipe-operator/28387/10

rfcs/0148-pipe-operator.md

piegamesde · 2023-05-26T17:15:08Z

A language with more syntax may be easier to write, but is not more expressive unless the syntax comes with semantics that were not already covered by existing features and combinations of them.

I disagree with your interpretation of the word "expressiveness". Because you can (almost) always already solve all existing problems with existing syntax in (almost) any programming language. That's the point of being Turing complete. Therefore the question then becomes, how well can a problem be expressed in the language. And I think this holds true even for changes that are purely syntactical, like this one.

When adding new syntax to the language, one goal may indeed be to make it easier to write. Another one, and IMO much more important, is does it make the language easier to read. Depending on the feature and the language those may coincide, or one may have the other as a side benefit, or they may contradict each other. I recently learned Haskell, so I am very well aware of the trap of having a lot of powerful operators that allow it to write programs concisely and without parentheses, but which comes at the cost of readability.

What is a real Nix problem?

Problems that one might face when writing Nix code, either for some flake/shell/system configuration or when contributing to Nixpkgs. What I mean with this, is that I don't want to solve problems that for example mostly occur when trying to solve AdventOfCode in Nix.

KFearsoff

While the lib.pipe function is pretty cool (thanks for introducing it to me!), I think going through with this RFC would take gigantic effort, and the positive results (if any) will be seen only after a few years. And I'm thinking those positive results aren't worth it, because they won't make Nixlang significantly easier to read for beginners, and they don't solve any technical issues with Nixpkgs or Nix.

rfcs/0148-pipe-operator.md

KFearsoff · 2023-05-27T14:36:54Z

rfcs/0148-pipe-operator.md

+
+## `builtins.pipe`
+
+`lib.pipe`'s functionality is implemented as a built-in function.


It's also hardly ever used

I think this is due to documentation issues rather than due to this function itself being bad. While it has a lot of potential of misuse, it can actually make code more readable if you put in the effort for your code to be readable from top to bottom.

I would recommend to always use a library, which can change things arbitrarily, thanks to being locked or pinned

This... makes sense, but then I'd make an argument that parts of nixpkgs.lib that manipulate generic data should exist outside of builtins and outside of nixpkgs - in a separate repository. It is not weird: we already have library flakes like flake-utils or flake-parts.

This discussion is outside of the scrope of this RFC, though; I merely disagree that lib.pipe not seeing much usage is due to technical reasons.

KFearsoff · 2023-05-27T14:37:52Z

rfcs/0148-pipe-operator.md

+like line numbers when some part of the pipeline fails.
+Additionally, it allows easy usage outside of Nixpkgs and increases discoverability.
+
+While Nixpkgs is bounds to minimum Nix versions and thus `|>` won't be available until


I think this is a great argument against going through with this RFC.

This would be an argument for never making any changes to improve the language at all, ever. Unless you see some shiny alternative language to which we'll realistically all migrate to within the next five years, any improvements to the Nix language are still expected to be beneficial.

I've actually thought about proposing this change for quite some time now, and the main thing that held me back was the idea is that Nix is a "lost cause" and that I should rather spending my energy towards some successor. But eventually, I realized that realistically, we'll be stuck with Nix for a long time to come, so better invest the energy to make it a bit more comfortable …

Also note that outside of Nixpkgs, the feature will be available almost immediately. There is a lot of Nix code outside of Nixpkgs, all these flakes, shells, and users' system configurations. Projects like home-manager, devenv, nur, etc. are all free to migrate to newer Nix versions at their own pace. We shouldn't ignore these.

rfcs/0148-pipe-operator.md

piegamesde · 2023-05-29T17:22:43Z

I think going through with this RFC would take gigantic effort

Honestly, the most effort in this RFC is convincing people, and maybe also the coordination across many projects. But from the technical side of things, this is actually pretty easy to implement.

and the positive results (if any) will be seen only after a few years.

This only applies to Nixpkgs, see #148 (comment)

And I'm thinking those positive results aren't worth it, because they won't make Nixlang significantly easier to read for beginners, and they don't solve any technical issues with Nixpkgs or Nix.

They also won't make it significantly harder for beginners to read Nix code IMO, while bringing quality of life improvements to everyday Nix development.

I don't understand why only "technical" problems should be worth solving.

edolstra · 2023-05-31T13:23:26Z

This RFC is now open for shepherd nominations!

piegamesde · 2023-06-05T22:37:45Z

@AndersonTorres because I don't know every programming language and just didn't come across OCaml during my research. Furthermore, the related work section is intended to roughly cover the design space, not to be an exhaustive list of every programming language.

piegamesde · 2023-06-06T15:27:09Z

Updated the text according to some of the initial feedback. The more I think of it, the more I'm leaning towards also having <| in the language. I'll try to conduct a larger Nixpkgs survey soon to get some more data on that question. (Function concatenation operators are still out IMO)

rfcs/0148-pipe-operator.md

AndersonTorres · 2023-06-06T21:10:16Z

I was thinking on it, precisely, two pipe operators! It makes the language more orthogonal: if we have arg |> function, it looks reasonable to have function <| arg as its reverse operator.

The problems are:

if we are to elevate pipe to builtins and pipe == |>, where is the builtin for reverse pipe? The apply previously suggested looks good to me;
how the pipes should interact when in a same statement (a |> b <| c, a <| b |> c)?
I suggest to APLize: same precedence, right-to-left associativity (a |> (b <| c), a <| (b |> c))
a problem for the parser team: how should the errors be reported?

rfcs/0148-pipe-operator.md

piegamesde · 2023-06-12T09:09:51Z

I nominate @maralorn, who has a lot of experience with functional programming languages and programming language design.

piegamesde · 2023-06-13T09:17:29Z

@roberth, what about you, would you like to be a shepherd? I'd rather like to have critical voices on board from the beginning …

maralorn · 2023-06-14T10:10:45Z

I nominate @maralorn, who has a lot of experience with functional programming languages and programming language design.

I am pretty certain there are a lot of people with more experience on this in the wider community. That doesn’t prevent me from having opinions on this particular bikeshed, though. 🤣

My availability depends on the timeframe here. I will be very busy in the next few weeks, after that I’d be on board.

piegamesde · 2023-06-14T11:07:29Z

I've procrastinated writing this RFC for at least half a year, so waiting two more months won't be the end of the world

roberth · 2023-06-15T15:14:05Z

would you like to be a shepherd?

I can do that

Co-authored-by: Robert Hensing <[email protected]>

piegamesde · 2024-07-21T09:08:57Z

Applied all suggestions; about the evaluation order point I'd like to delay that discussion until we have some real-world experience with implementations.

piegamesde · 2024-07-26T06:33:18Z

Nix implementation: NixOS/nix#11131
Lix implementation: https://gerrit.lix.systems/c/lix/+/1654/7
Nixfmt implementation: https://github.com/NixOS/nixfmt/pull/227/files

nixos-discourse · 2024-08-01T18:34:07Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/nix-2-24-released/49986/6

nixos-discourse · 2024-08-05T15:37:45Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-08-05/50170/1

piegamesde · 2024-08-08T18:18:55Z

Lix implementation is now merged into main as well. There is one small difference to the semantics of the implementation in Nix: Mixing both operators is not forbidden, instead <| binds at a lower priority. In the RFC text I wrote that this would be a bad idea, but I wanted to empirically verify that claim.

rhendric · 2024-08-12T20:23:03Z

rfcs/0148-pipe-operator.md

@@ -0,0 +1,330 @@
+---


Plan for moving forward/stabilizing feature in Nix

Now that the experimental feature has been released, it may be time to start talking about a plan for evaluating it.

I see a number of possibilities:

We do nothing and hope it happens organically that enough enthusiasts try the feature out to give it a good trial. In all likelihood, people will only comment if they dislike something about the feature, which means we could receive little or no feedback and be left wondering if enough people have looked at it. This requires least effort but is likely to take the longest.

We promote the feature in official Nix channels and set up some sort of polling for both positive and negative feedback, with an expectation of how long the poll will be running before moving this RFC to FCP. This requires a bit of up-front work and may be biased towards people who pay attention to official Nix channels, but has the advantage of resolving faster than the first possibility.

We devise an actual experiment to measure people's ability to learn the new operators. This might take the form of a survey asking people to rate the readability of various Nix expressions, some with the new operators and some without, and testing if there is a statistically significant difference in the ratings. We could send the survey to a representative sample of community members instead of (or in addition to) the public polling from the previous possibility, to try to control for bias. I'm not aware of the Nix community undertaking this level of rigor in the past but it would help us bring a stronger case for assuaging people's concerns about the mental cost of adding new operators. It would be a substantial investment of time from a few people (I'm happy to be one of those people but it probably shouldn't be me alone).

Anyone else have thoughts?

We do nothing and hope it happens organically that enough enthusiasts try the feature out to give it a good trial. In all likelihood, people will only comment if they dislike something about the feature, which means we could receive little or no feedback and be left wondering if enough people have looked at it. This requires least effort but is likely to take the longest.

I think it would be beneficial to give the new feature more visibility and promotion, rather than leaving it as an experimental feature indefinitely.
Collecting feedback through some form of polling or voting mechanism could provide valuable insights.
Additionally, introducing new features in a programming language is a significant event, especially for a community-driven project like Nix. It's likely that experienced PL experts would be needed to assess its impact and stability.

roberth · 2024-08-14T11:21:30Z

Latest observations:

Friction due to lack of pipelines creates a perverse incentive to make libraries bloated, incomplete and inconsistent (more context)
<| leads to visually unintuitive layouts when formatted according to the Nix formatting principles behind the merged RFC (see review for example and explanation)

Based on these observations and considering that a single operator could bring most of the value, I'm leaning towards accepting |> exclusively. The redundancy and "ugliness" of <| might combine to be a net negative when we have |>.

If we take this direction, perhaps |> could be simplified to |, as it matches the intuition based on shell pipes and jq pipes, which may be more familiar in part of the audience, and these tools are more likely to be used together in scripts.
It conflicts somewhat with Haskell's | for conditionals in patterns, but that should be ok because Nix is already quite a different flavor anyway. Low level languages use it for bitwise or, but Nix is not that either.

illustris · 2024-08-15T05:32:30Z

Here are some of my thoughts after using this operator for a while:

Partially applied pipes

Consider

nix-repl> inc = x: x+1
nix-repl> x = i: i |> inc |> toString
nix-repl> x 3
"4"

It would be nice to drop the i: i entirely, and treat x = |> inc |> toString as equivalent.

Lambdas inside pipe

nix-repl> double = x: x*2

# current syntax
nix-repl> 3 |> (x: 1 + x) |> double |> toString
"8"

# proposed alternative
nix-repl> 3 |> x: 1 + x |> double |> toString

# current syntax
nix-repl> 3 |> (x: 1 + (x |> double)) |> toString
"7"

# proposed alternative
nix-repl> 3 |> x: 1 + (x |> double) |> toString

The brackets needed around the function feel redundant.

rhendric · 2024-08-15T05:50:27Z

rfcs/0148-pipe-operator.md

@@ -0,0 +1,330 @@
+---


Partially applied pipes

To me this smells like function composition with extra steps. Function composition is discussed in the RFC as well, and while I am not completely opposed to it, my fear is that it reduces code readability given a lack of type annotations. In x = |> inc |> toString it is a lot less intuitively clear that x is a function.

This is one of these questions where I'd like to see more usage to find out whether this is a thing that comes up sufficiently often in practice that it is worth dealing with.

(Side note: I think we would get this feature for free if Nix had operator sections)

Lambdas inside pipe

While I agree that not requiring parentheses here would be nice, especially given that one goal of the pipe operator is to reduce parentheses, I don't see any way this would be realistically implementable without throwing the entire language under the bus. Making the binding strength of abstractions context dependent just doesn't sound great

Making the binding strength of abstractions context dependent just doesn't sound great

agreed, it’s a recipe for disaster

Lambdas inside pipe

Making the binding strength of abstractions context dependent

Right. I didn't think that through. This is a bad idea.

Partially applied pipes

In x = |> inc |> toString it is a lot less intuitively clear that x is a function

In my opinion it is slightly more clear than, for example,

concatLines = concatStringsSep "\n" getBin = getOutput "bin"

or any other partially applied function. The open |> (or |) at the start suggests to me that this is a function.

nixos-discourse · 2024-08-19T15:33:29Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-08-19/50831/1

nixos-discourse · 2024-09-02T15:21:10Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-09-02/51514/1

nixos-discourse · 2024-09-16T15:31:00Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-09-16/52224/1

Implements: NixOS/rfcs#148 Closes: #554

jian-lin · 2024-09-29T06:22:47Z

rfcs/0148-pipe-operator.md

+
+## Nixpkgs interaction
+
+As soon as the Nixpkgs minimum version contains `|>`, using it will be allowed and encouraged in the documentation.


Is it allowed to backport the pipe operator to the Nixpkgs minimum nix version?

Do major feature additions like this usually get a backport?

Even if it was backported, wouldn't it defeat the purpose of having a minimal version that's likely to be installed by most users?

A backport would still be a new release, even if it was based on an old major version number.

Sometimes. Support for zstd cache compression was backported to 2.3, so it's within the realms of possibility.

The reason we have a minimum version of 2.3 not so much to support people who haven't updated Nix in several years, it's because later versions of Nix have unresolved regressions in things that some people depend on.

nixos-discourse · 2024-09-30T15:28:33Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-09-30/53690/1

nixos-discourse · 2024-10-28T15:25:16Z

This pull request has been mentioned on NixOS Discourse. There might be relevant details there:

https://discourse.nixos.org/t/rfcsc-meeting-2024-10-28/55095/1

roberth suggested changes May 25, 2023

View reviewed changes

infinisil requested changes May 26, 2023

View reviewed changes

rfcs/0148-pipe-operator.md Show resolved Hide resolved

piegamesde mentioned this pull request May 26, 2023

Adding an operator like Haskell's '$' NixOS/nix#1845

Closed

KFearsoff reviewed May 27, 2023

View reviewed changes

edolstra added status: new status: open for nominations Open for shepherding team nominations and removed status: new labels May 31, 2023

edolstra mentioned this pull request May 31, 2023

Meeting 2023-05-31 NixOS/rfc-steering-committee#114

Closed

30 tasks

infinisil mentioned this pull request May 31, 2023

lib.concatMapAttrs: Simplify stack trace NixOS/nixpkgs#235197

Merged

12 tasks

tomberek mentioned this pull request May 31, 2023

Proxy like abstraction for an attrset NixOS/nix#8187

Open

roberth reviewed Jun 6, 2023

View reviewed changes

rfcs/0148-pipe-operator.md Outdated Show resolved Hide resolved

AndersonTorres reviewed Jun 6, 2023

View reviewed changes

rfcs/0148-pipe-operator.md Show resolved Hide resolved

rfcs/0148-pipe-operator.md Show resolved Hide resolved

rhendric mentioned this pull request Jun 13, 2023

treewide: use lib.optionalAttrs instead of 'then {}' NixOS/nixpkgs#235924

Merged

12 tasks

lheckemann mentioned this pull request Jun 14, 2023

Meeting 2023-06-14 NixOS/rfc-steering-committee#115

Closed

30 tasks

piegamesde and others added 4 commits July 21, 2024 10:40

Document unresolved binding strength

ea1cbf9

Move builtins.pipe to the alternatives section

964d236

Document apply a bit more

7e43edf

Update rfcs/0148-pipe-operator.md

1026104

Co-authored-by: Robert Hensing <[email protected]>

piegamesde force-pushed the pipe branch from 138d580 to 1026104 Compare July 21, 2024 09:01

inclyc mentioned this pull request Jul 26, 2024

pipe operator nix-community/nixd#554

Closed

roberth mentioned this pull request Jul 26, 2024

lib.strings.concatMapAttrsStringSep: init NixOS/nixpkgs#330010

Open

13 tasks

VTimofeenko mentioned this pull request Aug 1, 2024

Pipe operator formatting support NixOS/nixfmt#230

Closed

infinisil mentioned this pull request Aug 6, 2024

Support pipe operators NixOS/nixfmt#227

Merged

rhendric reviewed Aug 12, 2024

View reviewed changes

This comment was marked as duplicate.

Sign in to view

rhendric reviewed Aug 15, 2024

View reviewed changes

inclyc added a commit to nix-community/nixd that referenced this pull request Sep 18, 2024

libnixf: parse pipe operator

aa04ee8

Implements: NixOS/rfcs#148 Closes: #554

inclyc mentioned this pull request Sep 18, 2024

libnixf: parse pipe operator nix-community/nixd#595

Merged

inclyc added a commit to nix-community/nixd that referenced this pull request Sep 18, 2024

libnixf: parse pipe operator

bf8ae38

Implements: NixOS/rfcs#148 Closes: #554

inclyc added a commit to nix-community/nixd that referenced this pull request Sep 18, 2024

libnixf: parse pipe operator

36e841d

Implements: NixOS/rfcs#148 Closes: #554

inclyc added a commit to nix-community/nixd that referenced this pull request Sep 18, 2024

libnixf: parse pipe operator (#595)

e2f0d90

Implements: NixOS/rfcs#148 Closes: #554

jian-lin reviewed Sep 29, 2024

View reviewed changes


		## `builtins.pipe`

		`lib.pipe`'s functionality is implemented as a built-in function.


		## Nixpkgs interaction

		As soon as the Nixpkgs minimum version contains `\|>`, using it will be allowed and encouraged in the documentation.

[RFC 0148] Pipe operator #148

Are you sure you want to change the base?

[RFC 0148] Pipe operator #148

Conversation

piegamesde commented May 23, 2023

nixos-discourse commented May 23, 2023

roberth left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

piegamesde commented May 25, 2023

roberth commented May 25, 2023

suhr commented May 25, 2023

nixos-discourse commented May 25, 2023

piegamesde commented May 26, 2023

KFearsoff left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

piegamesde commented May 29, 2023

edolstra commented May 31, 2023

piegamesde commented Jun 5, 2023

piegamesde commented Jun 6, 2023

AndersonTorres commented Jun 6, 2023 • edited Loading

piegamesde commented Jun 12, 2023

piegamesde commented Jun 13, 2023 • edited Loading

maralorn commented Jun 14, 2023 • edited Loading

piegamesde commented Jun 14, 2023

roberth commented Jun 15, 2023

piegamesde commented Jul 21, 2024

piegamesde commented Jul 26, 2024

nixos-discourse commented Aug 1, 2024

nixos-discourse commented Aug 5, 2024

piegamesde commented Aug 8, 2024

Choose a reason for hiding this comment

Plan for moving forward/stabilizing feature in Nix

Choose a reason for hiding this comment

This comment was marked as duplicate.

roberth commented Aug 14, 2024

illustris commented Aug 15, 2024

Partially applied pipes

Lambdas inside pipe

rhendric Aug 15, 2024 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Partially applied pipes

Lambdas inside pipe

Choose a reason for hiding this comment

illustris Aug 16, 2024 • edited Loading

Choose a reason for hiding this comment

Lambdas inside pipe

Partially applied pipes

nixos-discourse commented Aug 19, 2024

nixos-discourse commented Sep 2, 2024

nixos-discourse commented Sep 16, 2024

Choose a reason for hiding this comment

Choose a reason for hiding this comment

alyssais Sep 29, 2024 • edited Loading

Choose a reason for hiding this comment

nixos-discourse commented Sep 30, 2024

nixos-discourse commented Oct 28, 2024

AndersonTorres commented Jun 6, 2023 •

edited

Loading

piegamesde commented Jun 13, 2023 •

edited

Loading

maralorn commented Jun 14, 2023 •

edited

Loading

rhendric Aug 15, 2024 •

edited

Loading

illustris Aug 16, 2024 •

edited

Loading

alyssais Sep 29, 2024 •

edited

Loading