drivers: usb: add usb device driver support for NPCM4XX series.

1. add npcm4xx usb device driver. 2. add npcm4xx usb device register define in reg_def.h 3. disable build i3c driver temporarily. 4. enable stack overflow checking. 5. configure the main stack size from 1024 to 2048. 6. disable compiler optimization as default. Signed-off-by: Adrian Chen <[email protected]>
Nuvoton-Israel · Aug 17, 2023 · d94d52b · d94d52b
1 parent 021fa39
commit d94d52b
Show file tree

Hide file tree

Showing 12 changed files with 1,394 additions and 5 deletions.
diff --git a/boards/arm/npcm400f_evb/fun_def_list.h b/boards/arm/npcm400f_evb/fun_def_list.h
@@ -79,3 +79,8 @@ FUN_DEFINE(DT_NODELABEL(pinctrl_i3c0_default), I3C1_SCL, I3C1_SDA)
 #if DT_NODE_HAS_STATUS(DT_NODELABEL(i3c1), okay) && CONFIG_I3C_NPCM4XX
 FUN_DEFINE(DT_NODELABEL(pinctrl_i3c1_default), I3C2_SCL, I3C2_SDA)
 #endif
+
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(usbd0), okay) && CONFIG_USB_DC_NPCM4XX
+FUN_DEFINE(DT_NODELABEL(pinctrl_usbd_phy_iclk), USBD_PHY_ICLK)
+FUN_DEFINE(DT_NODELABEL(pinctrl_usbd_phy_xclk), USBD_PHY_XCLK)
+#endif
diff --git a/boards/arm/npcm400f_evb/npcm400f_evb.dts b/boards/arm/npcm400f_evb/npcm400f_evb.dts
@@ -161,12 +161,13 @@
 		     /* &pinctrl_td4p_default */ /* TD4P - C6 */
 		     &pinctrl_vin3_default>; /* VIN3 - D6 */
 };
+
 &spip {
 	status = "okay";
 };
 
 &i3c0 {
-	status = "okay";
+	status = "disabled";
 	assigned-address = <0x20>;
 	i2c-scl-hz = <100000>;
 	i3c-scl-hz = <12500000>;
@@ -179,7 +180,7 @@
 };
 
 &i3c1 {
-	status = "okay";
+	status = "disabled";
 	assigned-address = <0x21>;
 	i2c-scl-hz = <100000>;
 	i3c-scl-hz = <12500000>;
@@ -207,3 +208,7 @@
 	 * };
 	 */
 };
+
+&usbd0 {
+	status = "okay";
+};
diff --git a/boards/arm/npcm400f_evb/npcm400f_evb_defconfig b/boards/arm/npcm400f_evb/npcm400f_evb_defconfig
@@ -12,10 +12,14 @@ CONFIG_SRAM_VECTOR_TABLE=y
 # General Kernel Options
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
 CONFIG_XIP=y
+CONFIG_STACK_SENTINEL=y
+CONFIG_MAIN_STACK_SIZE=2048		#default:1024
+CONFIG_NO_OPTIMIZATIONS=y
 
 # subsystem
 CONFIG_LOG=y
 CONFIG_LOG_BACKEND_UART=y
+CONFIG_LOG_BUFFER_SIZE=65536		#range:128-65536
 
 # Clock Driver
 CONFIG_CLOCK_CONTROL=y
@@ -80,5 +84,9 @@ CONFIG_SPI=y
 CONFIG_SPIP_NPCM4XX=y
 
 # I3C driver
-CONFIG_I3C=y
-CONFIG_I3C_NPCM4XX=y
+#CONFIG_I3C=y
+#CONFIG_I3C_NPCM4XX=y
+
+# USB Driver
+CONFIG_USB=y
+CONFIG_USB_DC_NPCM4XX=y
diff --git a/drivers/spi/spi_npcm4xx_spip.c b/drivers/spi/spi_npcm4xx_spip.c
@@ -53,7 +53,7 @@ static int spip_npcm4xx_configure(const struct device *dev,
 	const struct npcm4xx_spip_config *cfg = dev->config;
 	struct npcm4xx_spip_data *data = dev->data;
 	struct spip_reg *const spip_regs = (struct spip_reg *) cfg->base;
-	uint32_t u32Div;
+	uint32_t u32Div = 0;
 	int ret = 0;
 
 	if (SPI_WORD_SIZE_GET(config->operation) != 8) {

diff --git a/drivers/usb/device/CMakeLists.txt b/drivers/usb/device/CMakeLists.txt
@@ -11,3 +11,4 @@ zephyr_sources_ifdef(CONFIG_USB_NATIVE_POSIX
 	usb_dc_native_posix_adapt.c
 	)
 zephyr_sources_ifdef(CONFIG_USB_DC_NXP_EHCI  usb_dc_mcux_ehci.c)
+zephyr_sources_ifdef(CONFIG_USB_DC_NPCM4XX usb_dc_npcm4xx.c)
diff --git a/drivers/usb/device/Kconfig b/drivers/usb/device/Kconfig
@@ -115,4 +115,12 @@ config USB_NATIVE_POSIX
 	help
 	  Native Posix USB Device Controller Driver.
 
+config USB_DC_NPCM4XX
+	bool "Nuvoton NPCM4XX USB Device Controller Driver"
+	depends on SOC_FAMILY_NPCM4XX
+	select USB_DEVICE_DRIVER
+	help
+	  This option enables the USB device driver for NPCM4XX family of processors.
+	  Say y if you wish to use USB device on NPCM4XX.
+
 endif # USB