Pull request- Paperclips designs #135
Conversation
…s each (6 total). It is needed to find the error bar according to the three times of the same devices.
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
please remove spaces from your filenames. thank you |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
please remove spaces from your filenames. thank you |
|
Sure, I will do it. I actually wanted to submit another request, a
corrected design with a corrected filenames as well.
…On Tue, Oct 8, 2024 at 10:55 Lukas Chrostowski ***@***.***> wrote:
please remove spaces from your filenames.
thank you
@lukasc-ubc <https://github.com/lukasc-ubc>
—
Reply to this email directly, view it on GitHub
<#135 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/APPZ637CQPDQD6ZJBVAKYATZ2QFA3AVCNFSM6AAAAABPRA53HOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMBQGM3TSNBVGM>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
…clips_2_1st_repeat.gds
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
…clips_2_2nd_repeat.gds
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
…ips_2_1st_repeat.gds
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
…ips_1_1st_repeat.gds
…ips_1_2nd_repeat.gds
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
1 similar comment
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Merging. But note that there are 0 files changed here. So you may need to resubmit via a new PR. |
…s each (6 total). It is needed to find the error bar according to the three times of the same devices.