Update README.md

README.md

@@ -135,7 +135,7 @@ The 3216,1616,816,416,3217,1617 and 817 have two additional PWM pins driven by T
 In versions prior to 1.1.7, reconfiguting the TCA0's prescaler adversely effected tone and servo functionality. This is no longer the case.
 
 ### NeoPixel (WS2812) support
-The usual NeoPixel (WS2812) libraries have problems on these parts. This core includes two libraries for this, both of which are tightly based on the Adafruit_NeoPixel library. See the [tinyNeoPixel documentation](megaavr/extras/tinyNeoPixel.md) and included examples for more information.
+The usual NeoPixel (WS2812) libraries have problems on these parts. This core includes two libraries for this, both of which are tightly based on the Adafruit_NeoPixel library. See the [tinyNeoPixel documentation](megaavr/extras/tinyNeoPixel.md) and included examples for more information. As of 2.0.1, these libraries are split into three versions specific to the part to eliminate the use of an additional submenu option.
 
 ### Tone Support
 Support for tone() is provided on all parts using TCB0, unless TCB1 is present and TCB0 is set as millis source. This is like the standard tone() function; it does not support use of the hardware output compare to generate tones. See caveats below if using TCB0 or TCB1 for millis/micros settings.
@@ -227,7 +227,7 @@ These parts support many BOD trigger levels, with Disabled, Active, and Sampled
 This core *always* uses Link Time Optimization to reduce flash usage - all versions of the compiler which support the 0-series and 1-series ATtiny parts also support LTO, so there is no need to make it optional as was done with ATtinyCore.
 
 ### Identifying menu options within sketch
-It is often useful to identify what options are selected on the menus from within the sketch; this is particularly useful for verifying that you have selected the options you wrote the sketch for when you open it. See the example below.
+It is often useful to identify what options are selected on the menus from within the sketch; this is particularly useful for verifying that you have selected the options you wrote the sketch for when you open it; however, note that as of 2.0.1, almost all of these options have been removed except for the millis timer option.
 
 ##### Millis timer
 The option used for the millis/micros timekeeping is given by a define of the form USE_MILLIS_TIMERxx. Possible options are: