Merge branch 'android-4.9-q' of https://android.googlesource.com/kern…

…el/common into HEAD

Change-Id: I9edf608e40501a6051b72f1e7474e8769304dec2

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 275
+SUBLEVEL = 279
 EXTRAVERSION =
 NAME = Roaring Lionus
 

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -552,7 +552,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";

arch/arm/boot/dts/bcm63138.dtsi

@@ -174,7 +174,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";

arch/arm/boot/dts/bcm7445-bcm97445svmb.dts

@@ -13,10 +13,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;

arch/arm/boot/dts/bcm7445.dtsi

@@ -149,7 +149,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/bcm963138dvt.dts

@@ -29,10 +29,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;

arch/arm/boot/dts/exynos5422-odroidxu4.dts

@@ -26,7 +26,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

@@ -25,15 +25,15 @@
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
 		blueled {
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -307,8 +307,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -395,6 +395,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -136,7 +136,7 @@
 	status = "okay";
 
 	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du", "dclkin.0";
+	clock-names = "du.0", "dclkin.0";
 
 	ports {
 		port@0 {

arch/arm/boot/dts/r8a7779.dtsi

@@ -431,6 +431,7 @@
 		reg = <0 0xfff80000 0 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 

arch/arm/boot/dts/rk3036-kylin.dts

@@ -426,7 +426,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
 		};

arch/arm/boot/dts/rk3288.dtsi

@@ -735,7 +735,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -768,7 +768,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -780,7 +780,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -790,7 +790,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 			};
@@ -1278,7 +1278,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
 			};

arch/arm/boot/dts/sama5d4.dtsi

@@ -1371,7 +1371,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 

arch/arm/boot/dts/stm32f429.dtsi

@@ -334,7 +334,7 @@
 			};
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";

arch/arm/boot/dts/versatile-ab.dts

@@ -154,16 +154,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm/boot/dts/versatile-pb.dts

@@ -6,7 +6,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to

arch/arm/kernel/signal.c

@@ -626,18 +626,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }

arch/arm/mach-imx/suspend-imx53.S

@@ -33,11 +33,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8

arch/arm/probes/kprobes/test-thumb.c

@@ -444,21 +444,21 @@ void kprobe_thumb32_test_cases(void)
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RX("tbh	[pc, r",7, (9f-(1f+4))>>1,"]",
+	TEST_RX("tbh	[pc, r",7, (9f-(1f+4))>>1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RX("tbh	[pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+	TEST_RX("tbh	[pc, r",12, ((9f-(1f+4))>>1)+1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RRX("tbh	[r",1,9f, ", r",14,1,"]",
+	TEST_RRX("tbh	[r",1,9f, ", r",14,1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
@@ -471,10 +471,10 @@ void kprobe_thumb32_test_cases(void)
 
 	TEST_UNSUPPORTED("strexb	r0, r1, [r2]")
 	TEST_UNSUPPORTED("strexh	r0, r1, [r2]")
-	TEST_UNSUPPORTED("strexd	r0, r1, [r2]")
+	TEST_UNSUPPORTED("strexd	r0, r1, r2, [r2]")
 	TEST_UNSUPPORTED("ldrexb	r0, [r1]")
 	TEST_UNSUPPORTED("ldrexh	r0, [r1]")
-	TEST_UNSUPPORTED("ldrexd	r0, [r1]")
+	TEST_UNSUPPORTED("ldrexd	r0, r1, [r1]")
 
 	TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
 

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -414,21 +414,21 @@
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
 				clock-output-names = "pxlclk";
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;

arch/hexagon/kernel/vmlinux.lds.S

@@ -71,13 +71,8 @@ SECTIONS
 
 	_end = .;
 
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		EXIT_CALL
-	}
-
 	STABS_DEBUG
 	DWARF_DEBUG
 
+	DISCARDS
 }

arch/ia64/kernel/mca_drv.c

@@ -343,7 +343,7 @@ init_record_index_pools(void)
 
 	/* - 2 - */
 	sect_min_size = sal_log_sect_min_sizes[0];
-	for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
+	for (i = 1; i < ARRAY_SIZE(sal_log_sect_min_sizes); i++)
 		if (sect_min_size > sal_log_sect_min_sizes[i])
 			sect_min_size = sal_log_sect_min_sizes[i];
 

arch/mips/boot/compressed/Makefile

@@ -33,7 +33,7 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 KCOV_INSTRUMENT		:= n
 
 # decompressor objects (linked with vmlinuz)
-vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o
 
 ifdef CONFIG_DEBUG_ZBOOT
 vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT)		   += $(obj)/dbg.o
@@ -47,7 +47,7 @@ extra-y += uart-ath79.c
 $(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
 	$(call cmd,shipped)
 
-vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
 
 extra-y += ashldi3.c bswapsi.c
 $(obj)/ashldi3.o $(obj)/bswapsi.o: KBUILD_CFLAGS += -I$(srctree)/arch/mips/lib

arch/mips/boot/compressed/decompress.c

@@ -11,6 +11,8 @@
  * option) any later version.
  */
 
+#define DISABLE_BRANCH_PROFILING
+
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>

arch/mips/include/asm/hugetlb.h

@@ -67,7 +67,13 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
-	flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma)));
+	/*
+	 * clear the huge pte entry firstly, so that the other smp threads will
+	 * not get old pte entry after finishing flush_tlb_page and before
+	 * setting new huge pte entry
+	 */
+	huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	flush_tlb_page(vma, addr);
 }
 
 static inline int huge_pte_none(pte_t pte)