Update index.html

index.html

@@ -48,7 +48,7 @@ <h1 style="font-family:sen">Filament Impact Strength Comparison</h1>
     <h2 style="text-align:center">About the project</h2>
 <p>I created this impact strength tester after realizing that there were no good ways to compare filaments across manufacturers, as they used different testing methods.
    For example, PolyMaker PolyMax PC on PolyMaker's website had around half the impact strength of the same filament on Prusa's website.
-    However, I didn't have my own Charpy impact strength tester, so I decided to make my own that would at least allow me to compare filaments. 
+    However, I didn't have my own Charpy impact strength tester, so I decided to make my own that would at least allow me to compare filaments, and I hope to help the FTC and 3D printing community a little with this. 
   It uses tubes from FTC fields and a 3D printed frame, to allow a weighted tube to drop down onto the notched test piece. </p>
   <img src="tester.jpg" width="300">
   <img src="broken.jpg" width="300">