add ZLIB to CMakeLists.txt target_link_libraries() #104
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: macOS-Release | |
| on: | |
| push: | |
| paths-ignore: | |
| - 'README.md' | |
| - 'doc/**' | |
| pull_request: | |
| paths-ignore: | |
| - 'README.md' | |
| - 'doc/**' | |
| env: | |
| # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.) | |
| BUILD_TYPE: Release | |
| jobs: | |
| build-openexr-brew: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install libtiff | |
| run: brew install libtiff | |
| - name: install openexr | |
| run: brew install openexr | |
| - name: install aces_container | |
| run: brew install aces_container | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| build-openexr2: | |
| runs-on: macos-latest | |
| steps: | |
| # - name: uninstall openexr | |
| # run: brew uninstall --ignore-dependencies openexr | |
| # - name: uninstall imath | |
| # run: brew uninstall --ignore-dependencies imath | |
| - name: install dependencies - openexr v2.5 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-2.5 && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| build-openexr3: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| build-openexr3-static: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=OFF .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=OFF .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DBUILD_SHARED_LIBS=OFF | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| build-openexr3-shared: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=ON .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=ON .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DBUILD_SHARED_LIBS=ON | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| test-openexr-brew: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install libtiff | |
| run: brew install libtiff | |
| - name: install openexr | |
| run: brew install openexr | |
| - name: install aces_container | |
| run: brew install aces_container | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| # Execute tests defined by the CMake configuration. | |
| # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
| run: ctest -V --output-on-failure | |
| test-openexr2: | |
| runs-on: macos-latest | |
| steps: | |
| # - name: uninstall openexr | |
| # run: brew uninstall --ignore-dependencies openexr | |
| # - name: uninstall imath | |
| # run: brew uninstall --ignore-dependencies imath | |
| - name: install dependencies - openexr v2.5 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-2.5 && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| # Execute tests defined by the CMake configuration. | |
| # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
| run: ctest -V --output-on-failure | |
| test-openexr3: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| # Execute tests defined by the CMake configuration. | |
| # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
| run: ctest -V --output-on-failure | |
| test-openexr3-static: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=OFF .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=OFF .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DBUILD_SHARED_LIBS=OFF | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| # Execute tests defined by the CMake configuration. | |
| # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
| run: ctest -V --output-on-failure | |
| test-openexr3-shared: | |
| runs-on: macos-latest | |
| steps: | |
| - name: install dependencies - imath | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/Imath.git && | |
| cd Imath && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=ON .. && | |
| make && | |
| sudo make install | |
| - name: install dependencies - openexr v3.1 | |
| run: | | |
| cd .. | |
| git clone https://github.com/AcademySoftwareFoundation/openexr.git && | |
| cd openexr && | |
| git checkout RB-3.1 && | |
| mkdir build && | |
| cd build && | |
| cmake -DBUILD_SHARED_LIBS=ON .. && | |
| make && | |
| sudo make install | |
| - uses: actions/checkout@v4 | |
| - name: Configure CMake | |
| # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make. | |
| # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DBUILD_SHARED_LIBS=ON | |
| - name: Build | |
| # Build your program with the given configuration | |
| run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| # Execute tests defined by the CMake configuration. | |
| # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
| run: ctest -V --output-on-failure |