Add support for raid10

This removes the wait block for raid resync for two reasons:
1) raid0 does not have redundancy and therefore no initial resync[1]
2) with raid10 the resync time for 4x 1.9TB disks takes from tens of minutes
   to multiple hours, depending on sysctl params `dev.raid.speed_limit_min` and
   `dev.raid.speed_limit_max` and the speed of the disks. Initial resync for
   raid10 is not strictly needed[1]

Filesystem creation: by default `mkfs.xfs` attempts to TRIM the drive. This is
also something that can take tens of minutes or hours, depening on the size of
drives. TRIM can be skipped, as instances are delivered with disks fully
trimmed[2].

[1] https://raid.wiki.kernel.org/index.php/Initial_Array_Creation
[2] https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ssd-instance-store.html#InstanceStoreTrimSupport

templates/al2/runtime/bootstrap.sh

@@ -32,7 +32,7 @@ function print_help {
   echo "--enable-local-outpost Enable support for worker nodes to communicate with the local control plane when running on a disconnected Outpost. (true or false)"
   echo "--ip-family Specify ip family of the cluster"
   echo "--kubelet-extra-args Extra arguments to add to the kubelet. Useful for adding labels or taints."
-  echo "--local-disks Setup instance storage NVMe disks in raid0 or mount the individual disks for use by pods [mount | raid0]"
+  echo "--local-disks Setup instance storage NVMe disks in raid0 or mount the individual disks for use by pods <mount | raid0 | raid10>"
   echo "--mount-bpf-fs Mount a bpffs at /sys/fs/bpf (default: true)"
   echo "--pause-container-account The AWS account (number) to pull the pause container from"
   echo "--pause-container-version The tag of the pause container"

templates/shared/runtime/bin/setup-local-disks

@@ -15,7 +15,7 @@ err_report() {
 trap 'err_report $LINENO' ERR
 
 print_help() {
-  echo "usage: $0 <raid0 | mount | none>"
+  echo "usage: $0 <raid0 | raid10 | mount | none>"
   echo "Sets up Amazon EC2 Instance Store NVMe disks"
   echo ""
   echo "-d, --dir directory to mount the filesystem(s) (default: /mnt/k8s-disks/)"
@@ -26,11 +26,18 @@ print_help() {
   echo "-h, --help print this help"
 }
 
-# Sets up a RAID-0 of NVMe instance storage disks, moves
-# the contents of /var/lib/kubelet and /var/lib/containerd
+# Sets up a RAID-0 or RAID-10 of NVMe instance storage disks,
+# moves the contents of /var/lib/kubelet and /var/lib/containerd
 # to the new mounted RAID, and bind mounts the kubelet and
 # containerd state directories.
-maybe_raid0() {
+#
+# Do not wait for initial resync: raid0 has no redundancy so there
+# is no initial resync. Raid10 does not strictly needed a resync,
+# while the time taken for 4 1.9TB disk raid10 would be in range of
+# 20 minutes to 20 days, depending on dev.raid.speed_limit_min and
+# dev.raid.speed_limit_max sysctl parameters.
+maybe_raid() {
+  local raid_level="$1"
   local md_name="kubernetes"
   local md_device="/dev/md/${md_name}"
   local md_config="/.aws/mdadm.conf"
@@ -40,14 +47,10 @@ maybe_raid0() {
   if [[ ! -s "${md_config}" ]]; then
     mdadm --create --force --verbose \
       "${md_device}" \
-      --level=0 \
+      --level="${raid_level}" \
       --name="${md_name}" \
       --raid-devices="${#EPHEMERAL_DISKS[@]}" \
       "${EPHEMERAL_DISKS[@]}"
-    while [ -n "$(mdadm --detail "${md_device}" | grep -ioE 'State :.*resyncing')" ]; do
-      echo "Raid is resyncing..."
-      sleep 1
-    done
     mdadm --detail --scan > "${md_config}"
   fi
 
@@ -63,7 +66,8 @@ maybe_raid0() {
     ## for the log stripe unit, but the max log stripe unit is 256k.
     ## So instead, we use 32k (8 blocks) to avoid a warning of breaching the max.
     ## mkfs.xfs defaults to 32k after logging the warning since the default log buffer size is 32k.
-    mkfs.xfs -l su=8b "${md_device}"
+    ## Instances are delivered with disks fully trimmed, so TRIM is skipped at creation time.
+    mkfs.xfs -K -l su=8b "${md_device}"
   fi
 
   ## Create the mount directory
@@ -231,8 +235,8 @@ set -- "${POSITIONAL[@]}" # restore positional parameters
 DISK_SETUP="$1"
 set -u
 
-if [[ "${DISK_SETUP}" != "raid0" && "${DISK_SETUP}" != "mount" && "${DISK_SETUP}" != "none" ]]; then
-  echo "Valid disk setup options are: raid0, mount, or none"
+if [[ "${DISK_SETUP}" != "raid0" && "${DISK_SETUP}" != "raid10" && "${DISK_SETUP}" != "mount" && "${DISK_SETUP}" != "none" ]]; then
+  echo "Valid disk setup options are: raid0, raid10, mount or none"
   exit 1
 fi
 
@@ -256,11 +260,21 @@ fi
 ## Get devices of NVMe instance storage ephemeral disks
 EPHEMERAL_DISKS=($(realpath "${disks[@]}" | sort -u))
 
+## Also bail early if there are not enough disks for raid10
+if [[ "${DISK_SETUP}" == "raid10" && "${#EPHEMERAL_DISKS[@]}" -lt 4 ]]; then
+  echo "raid10 requires at least 4 disks, but only ${#EPHEMERAL_DISKS[@]} found, skipping disk setup"
+  exit 0
+fi
+
 case "${DISK_SETUP}" in
   "raid0")
-    maybe_raid0
+    maybe_raid 0
     echo "Successfully setup RAID-0 consisting of ${EPHEMERAL_DISKS[@]}"
     ;;
+  "raid10")
+    maybe_raid 10
+    echo "Successfully setup RAID-10 consisting of ${EPHEMERAL_DISKS[@]}"
+    ;;
   "mount")
     maybe_mount
     echo "Successfully setup disk mounts consisting of ${EPHEMERAL_DISKS[@]}"