Update README.md

cmcgerty · Feb 8, 2021 · 4d58a04 · 4d58a04
1 parent fef2191
commit 4d58a04
Showing 1 changed file with 9 additions and 9 deletions.
diff --git a/README.md b/README.md
@@ -117,15 +117,15 @@ Now connect wires A and B to the two wire RS485 input of your inverter, which is
 
 Here's what the various things on the OLED screen tell you:
 
-Line 1 is just the project name, nothing else.
-Line 2 will display "Connecting" during start up and lines 3 and 4 will show WIFI and MQTT getting connected.
-Line 2 also has a dot that slowly flashes, once every few seconds. This is when a heartbeat message is being sent to the inverter.
-If a message is read from the inverter that fails the CRC checksum, line 3 will display "CRC-FAULT". This could be caused by a loose or bad RS485 wire or by unsupported features.
-If no response is received to a heartbeat message, lines 3 and 4 show "RS485 ERROR". This could be caused by disconnected or revered RS485 wires.
-During start-up, line 4 shows the Sofar2MQTT software version. Check that you have the latest version at [https://github.com/cmcgerty/Sofar2MQTT](https://github.com/cmcgerty/Sofar2MQTT}
-In normal operation, line 2 shows "Online" which indicates that both WIFI and MQTT are still connected.
-In normal operation, line 3 shows the inverter run state, Standby, Charging, Discharging etc.
-In normal operation, line 4 shows the power in W in or out of the batteries when charging or discharging.
+Line 1 is just the project name, nothing else.  
+Line 2 will display "Connecting" during start up and lines 3 and 4 will show WIFI and MQTT getting connected.  
+Line 2 also has a dot that slowly flashes, once every few seconds. This is when a heartbeat message is being sent to the inverter.  
+If a message is read from the inverter that fails the CRC checksum, line 3 will display "CRC-FAULT". This could be caused by a loose or bad RS485 wire or by unsupported features.  
+If no response is received to a heartbeat message, lines 3 and 4 show "RS485 ERROR". This could be caused by disconnected or revered RS485 wires.  
+During start-up, line 4 shows the Sofar2MQTT software version. Check that you have the latest version at https://github.com/cmcgerty/Sofar2MQTT  
+In normal operation, line 2 shows "Online" which indicates that both WIFI and MQTT are still connected.  
+In normal operation, line 3 shows the inverter run state, Standby, Charging, Discharging etc.  
+In normal operation, line 4 shows the power in W in or out of the batteries when charging or discharging.