Release: new helper script to improve the release process

Signed-off-by: Chris Porter <[email protected]>

hack/release-helper-yaml-list.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+RHYL_PREREQS=(
+    "config/samples/enclave-cc/sim/kustomization.yaml"
+    "config/samples/enclave-cc/hw/kustomization.yaml"
+    "config/samples/ccruntime/default/kustomization.yaml"
+    "config/samples/ccruntime/peer-pods/kustomization.yaml"
+    "config/samples/ccruntime/s390x/kustomization.yaml"
+)
+
+RHYL_KATA=(
+    "config/samples/ccruntime/default/kustomization.yaml"
+    "config/samples/ccruntime/peer-pods/kustomization.yaml"
+    "config/samples/ccruntime/s390x/kustomization.yaml"
+)

hack/release-helper.sh

@@ -0,0 +1,252 @@
+#!/bin/bash
+#
+# Copyright Confidential Containers Contributors
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+set -o errexit
+set -o nounset
+set -o pipefail
+
+# Source the list of yaml files that will be updated
+source release-helper-yaml-list.sh
+
+#
+# This script automates the changes across the operator repo that have to be
+# done during a confidential-containers release. These should correspond
+# to several key steps in the release checklist:
+#   https://github.com/confidential-containers/confidential-containers/blob/main/.github/ISSUE_TEMPLATE/release-check-list.md
+# The script does not automate git commits or pushes, and it does not open PRs.
+#
+# Note: This script intentionally uses sed. yq (or even python libraries like
+# "yaml" or "ruamel.yaml") do not preserve yaml formatting.
+#
+
+
+
+
+# Assumption: This script lives in operator's top-level hack/ folder
+script_dir=$(dirname "$(readlink -f "$0")")
+proj_root=$(readlink -f "${script_dir}"/..)
+
+
+
+
+function usage_and_exit() {
+    echo
+    echo "Usage:"
+    echo "  $0  <ACTION> [ARGS]"
+    echo
+    echo "  ACTION"
+    echo "  One of { check, update }"
+    echo "  check   Check that it's OK to proceed with the release. May modify"
+    echo "          local files if needed but does not commit or push them."
+    echo "          Note: Takes no args."
+    echo "  update  Update the operator repo with new tags. Modifies local"
+    echo "          files but does not commit or push them."
+    echo "          Note: All args are required"
+    echo
+    echo "  ARGS"
+    echo "  -o  The operator tag for your release"
+    echo "      Example: v0.9.0"
+    echo "  -e  The enclave-cc tag for your release"
+    echo "      Example: v0.9.1"
+    echo "  -k  The kata tag for your release (n.b. no 'v' prefix)"
+    echo "      Example: 3.6.0"
+    echo
+    echo "Example usage:"
+    echo "    $0 check"
+    echo "    $0 update -o v0.9.0 -e v0.9.1 -k 3.6.0"
+    echo
+    exit 1
+}
+
+
+function bail_if_dirty_repo() {
+    git diff --quiet ||
+          (echo
+           echo "Error: Must use a clean repo to use this script."
+           echo "       Stash, commit, branch, or use a fresh clone, etc."
+           echo
+           exit 1)
+}
+
+
+function parse_args() {
+    # pull the ACTION from the args list
+    if [ $# = 0 ]; then
+        usage_and_exit
+    fi
+    action=$1
+    shift
+
+    # parse the o, e, and k args
+    while getopts ":o:e:k:" opt; do
+        case "${opt}" in
+            o)
+                operator_tag=${OPTARG} ;;
+            e)
+                enclave_cc_tag=${OPTARG} ;;
+            k)
+                kata_tag=${OPTARG} ;;
+            *)
+                usage_and_exit ;;
+        esac
+    done
+
+    # minimal checking: ensure all args are provided when using 'update'
+    if [ "${action}" = "update" ]; then
+        if [[ ! -v operator_tag ]] || [[ ! -v enclave_cc_tag ]] || [[ ! -v kata_tag ]]; then
+            echo "Error: Missing ARGS"
+            usage_and_exit
+        fi
+    fi
+}
+
+
+#
+# Make sure that the pre-reqs container ships the same version of the nydus
+# snapshotter that we use in the kata ci. Update the Makefile if needed.
+#
+function check_nydus() {
+    echo "Checking that the operator's nydus version matches the one used in kata"
+
+    kata_versions="https://raw.githubusercontent.com/kata-containers/kata-containers/refs/tags/${kata_tag}/versions.yaml"
+    kata_versions_dest="versions.yaml.$$"
+
+    # pull the versions.yaml that kata uses
+    wget --quiet "${kata_versions}" -O "${kata_versions_dest}"
+
+    # multi-line grep to find the nydus-snapshotter version in kata's version.yaml
+    # then awk/tail/tr and string manipulation to sand it down.
+    nydus_version_kata="$(grep -zoP "nydus-snapshotter.*\n.*description.*\n.*url.*\n.*version.*" ${kata_versions_dest} | awk '{print $2}' | tail -n1 | tr -d '\0')"
+    nydus_version_kata=${nydus_version_kata//\"} # strip double quotes
+
+    # delete temporary kata versions.yaml that we downloaded
+    rm "${kata_versions_dest}"
+
+    # grab the nydus version in the operator
+    prereqs_makefile="install/pre-install-payload/Makefile"
+    nydus_version_prereqs="$(grep '^NYDUS_SNAPSHOTTER_VERSION = ' $prereqs_makefile | awk '{print $3}')"
+
+    # check for match and update if needed
+    if [ "${nydus_version_kata}" == "${nydus_version_prereqs}" ]; then
+        echo "-> OK, no changes made: nydus-snapshotter already up-to-date" \
+             "(version: $nydus_version_prereqs)"
+    else
+        echo "-> Found mismatch: updating nydus-snapshotter from" \
+             "$nydus_version_prereqs to $nydus_version_kata"
+        sed -i "s/^NYDUS_SNAPSHOTTER_VERSION = .*/NYDUS_SNAPSHOTTER_VERSION = $nydus_version_kata/" "${prereqs_makefile}"
+        echo "-> Changes made to ${prereqs_makefile}."
+        echo "   Please verify and open PR as needed."
+    fi
+}
+
+
+#
+# Update the operator tag for the new release.
+#
+function update_operator() {
+    operator_yaml="config/release/kustomization.yaml"
+    echo "Updating operator version to ${operator_tag}"
+    echo "-> Updating ${operator_yaml}"
+    sed -i "s/newTag:.*/newTag: ${operator_tag}/" "${operator_yaml}"
+}
+
+
+#
+# Update the CRDs to point to the most recent version of the pre-reqs payload.
+#
+# To determine the tag of the reqs-payload on quay that needs to be pinned, we
+# have to dig deeper than simply looking at the latest commit associated with
+# the install/pre-install-payload/ folder. At the time of this writing, the
+# reqs-payload is updated automatically by the CI workflow in
+# pre-install-image-publish-on-merge.yaml. It is triggered on merge, and it
+# tags the reqs-payload in quay with the commit sha of that merge.
+# Thus, we use `git rev-list` to find the commit sha of the merge that is
+# associated with the most recent commit to install/pre-install-payload/.
+#
+function update_prereqs() {
+    commit="$(git log -1 --pretty=format:"%H" install/pre-install-payload/)"
+    prereqs_latest_hash=$( (git rev-list $commit..HEAD --ancestry-path | cat -n; git rev-list $commit..HEAD --first-parent | cat -n) | sort -k2 -s | uniq -f1 -d | sort -n | tail -1 | cut -f2)
+
+    echo "Updating pre-reqs payload to $prereqs_latest_hash"
+
+    for f in "${RHYL_PREREQS[@]}"; do
+        echo "-> Updating $f"
+        # match the reqs-payload line; then replace the newTag line after it
+        sed -i '/quay.io\/confidential-containers\/reqs-payload/{n;s/.*/  newTag: '"${prereqs_latest_hash}"'/}' "$f"
+    done
+
+}
+
+
+#
+# Update enclave-cc and ccruntime bundles
+#
+function update_bundles() {
+
+    echo "Updating enclave-cc yamls to $enclave_cc_tag"
+
+    echo "-> Updating config/samples/enclave-cc/sim/kustomization.yaml"
+    # this is a release; use runtime-payload instead of runtime-payload-ci
+    sed -i 's/quay.io\/confidential-containers\/runtime-payload-ci/quay.io\/confidential-containers\/runtime-payload/' config/samples/enclave-cc/sim/kustomization.yaml
+    # match the runtime-payload line; then replace the newTag line after it
+    sed -i '/quay.io\/confidential-containers\/runtime-payload/{n;s/.*/  newTag: enclave-cc-SIM-sample-kbc-'"${enclave_cc_tag}"'/}' config/samples/enclave-cc/sim/kustomization.yaml
+
+    echo "-> Updating config/samples/enclave-cc/base/ccruntime-enclave-cc.yaml"
+    # this is a release; use runtime-payload instead of runtime-payload-ci
+    # and change the tag from latest to the provided version tag
+    sed -i "s/runtime-payload-ci:enclave-cc-HW-cc-kbc-latest/runtime-payload:enclave-cc-HW-cc-kbc-${enclave_cc_tag}/" config/samples/enclave-cc/base/ccruntime-enclave-cc.yaml
+
+    echo "Updating ccruntime yamls to $kata_tag"
+
+    for f in "${RHYL_KATA[@]}"; do
+        echo "-> Updating $f"
+        # this is a release; delete the newName kata-deploy-ci line
+        sed -i '/newName: quay.io\/kata-containers\/kata-deploy-ci/d' "$f"
+        # match the kata-deploy line; then replace the newTag line after it
+        sed -i '/quay.io\/kata-containers\/kata-deploy/{n;s/.*/  newTag: '"${kata_tag}"'/}' "$f"
+    done
+
+}
+
+
+function check_release() {
+    check_nydus
+}
+
+
+function update_payloads() {
+    update_operator
+    update_prereqs
+    update_bundles
+}
+
+
+function main() {
+    bail_if_dirty_repo
+    parse_args "$@"
+
+    echo
+    echo "** Running script for action \"${action}\" **"
+    echo "**    Working directory: ${proj_root} **"
+    echo
+    pushd "${proj_root}" &> /dev/null
+
+    case "${action}" in
+    check) check_release ;;
+    update) update_payloads ;;
+    *) echo "Unexpected ACTION provided: ${action}"; usage_and_exit;; # unexpected
+    esac
+
+    echo
+    echo "** Done **"
+    echo
+    popd &> /dev/null
+}
+
+
+
+
+main "$@"