Adds klipper macros for

• Email/text notification on completion/filament runout (macros/email.cfg, macros/events.cfg, macros/send_email.py, vars.sh)
• Git add, commit, push, pull (macros/git.cfg)
• Idle power off (macros/power.cfg)
• M600, Filament runout, pause, resume (macros/events.cfg)
• START_PRINT with purge line, and END_PRINT commands (macros/events.cfg)
• Creating new bed mesh after every X prints (macros/events.cfg, variables.cfg)

Pre-requisite

• gcode_shell_command is required. Install using kiauh from Advanced menu.
• If you don't have a smart switch for auto power off, then don't take macros/power.cfg
• If you don't need git push/pull macros, then don't take macros/git.cfg
• Make sure you don't have duplicate conflicts with required.cfg
• Update printer.cfg to include the additional cfg files

# Sample includes

#####################################
#              MACROS               #
#####################################
[include macros/*.cfg]

#####################################
#            REQUIRED               #
#####################################
[include required.cfg]

Configure Email

• Update vars.sh with your email details.
• Can use email to sms as well if you want a text message (varies between providers, search on google).
• Recipients are comma delimited

Slicer settings

• Slicer start/end gcode should have START_PRINT and END_PRINT
• START_PRINT requires hotend temp and bed temp parameters passed in

; Sample Cura START_PRINT
START_PRINT HOTEND={material_print_temperature_layer_0} BED={material_bed_temperature_layer_0}

• END_PRINT requires machine depth (Max Y) passed in.

; Sample Cura END_PRINT
END_PRINT MACHINE_DEPTH={machine_depth}

Re-create bed mesh after X prints

• Update prints_til_probe value in variables.cfg in order set your preferred X number of probes before re-creating bed mesh

Filament Sensor (optional)

• Configure filament sensor to call email macro by adding runout_code to your filament sensor section, then call M600 to perform runout actions to pause and eject filament

# Sample Filament Motion Sensor

[filament_motion_sensor btt_sensor]
detection_length: 100.0
extruder: extruder
switch_pin: PA4
pause_on_runout: false
runout_gcode:
  {action_respond_info("RUNOUT: Filament runout")}
  RUN_SHELL_COMMAND CMD=SEND_EMAIL_RUNOUT
  M600

Add power device (optional)

• Add a power device in moonraker.conf in order for auto power off to work

# Sample Tasmota Device

[power tasmota]
type: tasmota
address: tasmota-ender
restart_klipper_when_powered: True

Configure git repository (optional)

• If you want to utilize the git pull/push macros, setup your git repository in ~/klipper_config
• Create directory with your hostname in ~/klipper_config/backups/ where it will backup your printer specific config files