ChainPad Algorithm is a Realtime Collaborative Editor algorithm based on Nakamoto Blockchains. This implementation is designed to run with a dumb broadcasting server but with minimal effort, the algorithm could be ported to full peer-to-peer. Because the ChainPad server need not be aware of the content which is being edited, different types of editors can exist in harmony on the same system.
This library is currently licensed as LGPL-2.1. Previous versions of this library (v5.2.7 and below) were licensed as AGPL-3.0.
To embed ChainPad in your web application, it is recommended that you use the contained node.js
websocket server. You may examine test.html to see how to bind the editor to a simple textarea.
To compile the code into chainpad.js run the following:
npm install
node make
This will run the tests and concatenate the js files into the resulting chainpad.js output file.
var chainpad = ChainPad.create(config);
// The bindings are not included in the engine, see below.
bindToDataTransport(chainpad);
bindToUserInterface(chainpad);
chainpad.start();Config is an optional object parameter which may have one or more of the following contents. NOTE: it's critical that every ChainPad instance in the session has the same values for these parameters.
- initialState (string) content to start off the pad with, default is empty-string.
- checkpointInterval (number) the number of patches which should be allowed to go across the wire before sending a checkpoint. A small number will result in lots of sending of checkpoints which are necessarily large because they send the whole document in the message. A large number will result in more patches to download for a new person joining the pad.
- avgSyncMilliseconds (number) the number of milliseconds to wait before sending to the server if there is anything to be sent. Making this number smaller will cause lots of patches to be sent (however the number will be limited by the RTT to the server because ChainPad will only keep one unacknowledged message on the wire at a time).
- validateContent (function) if specified, this function will be called during each patch and receive the content of the document after the patch, if the document has semantic requirements then this function can validate them if they are broken then the patch will be rejected.
- strictCheckpointValidation (boolean) if true then we will fail any checkpoint which comes at an interval which is not in agreement with checkpointInterval. Default: false.
- patchTransformer (function) if specified, this function will be used for Operational
Transformation. You have 3 options which are packaged with ChainPad or you can implement your own.
ChainPad.TextTransformer(this is default so you need not pass anything) if you're using ChainPad on plain text, you probably want to use this.ChainPad.SmartJSONTransformerif you are using ChainPad to patch JSON data, you probably want this.ChainPad.NaiveJSONTransformerthis is effectively just TextTransformer with a validation step to make sure the result is JSON, using this is not recommended.
- operationSimplify (function) This is an optional function which will override the function
ChainPad.Operation.simplifyin case you want to use a different one. Simplify is used for "fixing" operations which remove content and then put back the same content. The default simplify will not create patches containing strings with single characters from surrogate pairs. - logLevel (number) If this is zero, none of the normal logs will be printed.
- userName (string) This is a string which will appear at the beginning of all logs in the console, if multiple ChainPad instances are running at the same time, this will help differentiate them.
- noPrune (boolean) If this is true, history will not be pruned when a checkpoint is encountered. Caution: this can end up occupying a lot of memory!
- diffFunction (function) This is a function which takes 2 strings and outputs and array of
Operations. If unspecified, ChainPad will use the
ChainPad.Diffwhich is a smart diff algorithm based on the one used by Fossel. The default diff function will not create patches containing strings with single characters from surrogate pairs. - diffBlockSize (number) This is an optional number which will inform the default diff function
ChainPad.Diffhow big the rolling window should be. Smaller numbers imply more resource usage but common areas within a pair of documents which are smaller than this number will not be seen. The default is 8. - transformFunction (function) This parameter has been removed, if you attempt to pass this argument ChainPad will fail to start and throw an error.
To bind the session to a data transport such as a websocket, you'll need to use the message()
and onMessage() methods of the ChainPad session object as follows:
- message: Function which takes a String and signals the ChainPad engine of an incoming message.
- onMessage: Function which takes a function taking a String, called by the ChainPad engine when a message is to be sent.
var socket = new WebSocket("ws://your.server:port/");
socket.onopen = function(evt) {
socket.onmessage = function (evt) { chainpad.message(evt.data); };
chainpad.onMessage(function (message, cb) {
socket.send(message);
// Really the callback should only be called after you are sure the server has the patch.
cb();
});
});- Register a function to handle changes to the document, a change comprises an offset, a number of characters to be removed and a number of characters to be inserted. This is the easiest way to interact with ChainPad.
var myContent = '';
chainpad.onChange(function (offset, toRemove, toInsert) {
myContent = myContent.substring(0, offset) + toInsert + myContent.substring(offset + toRemove);
});- Signal to chainpad engine that the user has inserted and/or removed content with the change() function.
var chainpad = ChainPad.create();
chainpad.change(0, 0, "Hello world");
console.log(chainpad.getUserDoc()); // -> "Hello world"
chainpad.change(0, 5, "Goodbye cruel");
console.log(chainpad.getUserDoc()); // -> "Goodbye cruel world"- Register a function to handle a patch to the document, a patch is a series of insertions and
deletions which may must be applied atomically. When applying, the operations in the patch must
be applied in decending order, from highest index to zero. For more information about Patch,
see
chainpad.Patch.
chainpad.onPatch(function(patch) {});- Signal the chainpad engine that the user has inserted and/or removed content to/from the document. The Patch object can be constructed using Patch.create and Operations can be added to the patch using Operation.create and Patch.addOperation(). See ChainPad Internals for more information.
chainpad.patch(patch);A block object is an internal representation of a message sent on the wire, each block contains a
Patch which itself contains one or more Operations. You can access Blocks using
chainpad.getAuthBlock() or chainpad.getBlockForHash().
- hashOf: Calculated SHA256 of the on-wire representation of this Block (as a Message).
- lastMsgHash: SHA256 of previous/parent Block in the chain. If this is all zeros then this Block is the initial block.
- isCheckpoint: True if this Block represents a checkpoint. A checkpoint always removes all of the content from the document and then adds it back, leaving the document as it was.
- getParent
() -> Block: Get the parent block of this block, this is fast because the blocks are already in the chain in memory. - getContent
() -> string: Get the content of the Authoritative Document at the point in the history represented by this block. This takes time because it requires replaying part of the chain. - getPatch
() -> Patch: Get a clone of the Patch which is contained in this block. - getInversePatch
() -> Patch: Get a clone of the inverse Patch (the Patch which would undo the Patch provided by getPatch). This is calculated when the Message comes in to ChainPad. - equals
(Block) -> Boolean: Find out if another Block is representing the same underlying structure, since Blocks are created whenever one is requested, using triple-equals is not ok.
Start the engine, this will cause the engine to setup a setInterval to sync back the changes reported. Before start() is called, you can still inform chainpad of changes from the network.
Stop the engine, no more messages will be sent, even if there is Uncommitted Work.
Flush the Uncommitted Work back to the server, there is no guarantee that the work is actually committed, just that it has attempted to send it to the server.
Access the Authoritative Document, this is the content which everybody has agreed upon and has been entered into the chain.
Access the blockchain block which is at the head of the chain, this block contains the last patch which made the Authoritative Document what it is. This returns a Block Object.
Access the stored block which based on the SHA-256 hash.
Access the document which the engine believes is in the user interface, this is equivilant to the Authoritative Document with the Uncommitted Work patch applied. Useful for debugging. This should be equivilant to the string representation of the content which is in the UI.
Determine how deep a particular state is in the chain relative to the current state. Depth means the number of patches.
// the authDoc is 0 patches deep, by definition
0 === chainpad.getDepthOfState(chainpad.getAuthDoc());
// if a state never existed in the chain, return value is -1
-1 === chainpad.getDepthOfState("said no one ever");
// ^^ assuming the state of the document was never "said no one ever"You can specify a minimum depth to traverse, skip forward (down) this number of patches before starting to try to match the specified content. This allows you to see multiple times in history when the content was equal to the specified content. This function will not detect depth of states older than the second checkpoint because this is pruned.
// determine the last time the userDoc was 'pewpew'
var firstEncounter = chainpad.getDepthOfState('pewpew');
// check if it was ever previously in that state
if (chainpad.getDepthOfState('pewpew', firstEncounter) !== -1) {
// use this pattern to check if the document state was 'pewpew'
// at more than one point in its history
console.log("the state 'pewpew' exists in the chain in at least two states");
}Register a handler to be called once when there is no Uncommitted Work left. This does not prove that no patch will be reverted because of a chain fork, but it does verify that the message has hit the server and been acknowledged. The handler will be called only once the next time the state is settled but you can re-register inside of the handler.
Tells the amount of lag between the last onMessage events being fired by chainpad and the callback. Specifically this returns an object with lag and pending properties. Pending is true if a message has been sent which has not yet been acknowledged. Lag is the amount of time between the previous sent message and it's response or if the previously send message has not yet been acknowledged, it is the amount of time since it was sent.
- Operation: An atomic insertion and/or deletion of a string at an offset in the document. An Operation can contain both insertion and deletion and in this case, the deletion will occur first.
- Patch: A list of Operations to be applied to the document in order and a hash of the document content at the previous state (before the patch is applied).
- Message: Either a request to register the user, an announcement of a user having joined the document or an encapsulation of a Patch to be sent over the wire.
- Block: This is an API encapsulation of the Message when it is in the chain.
- apply
(Patch, Document) -> Document: This function is fairly self-explanatory, a new document is returned which reflects the result of applying the Patch to the document. The hash of the document must be equal topatch.parentHash, otherwise an error will result. - merge
(Patch, Patch) -> Patch: Merging of two mergable Patches yields a Patch which does the equivilant of applying the first Patch, then the second. Any two Operations which act upon overlapping or abutting sections of a document can (and must) be merged. A Patch containing mergable operations in invalid. - invert
(Patch, Document) -> Patch: Given a Patch and the document to which it could be applied, calculate the inverse Patch, IE: the Patch which would un-do the operation of applying the original Patch. - simplify
(Patch, Document) -> Patch: After merging of Patches, it is possible to end up with a Patch which contains some redundant or partially redundant Operations, a redundant Operation is one which removes some content from the document and then adds back the very same content. Since the actual content to be removed is not stored in the Operation or Patch, the simplify function exists to find and remove any redundancy in the Patch. Any Patch which is sent over the wire which can still be simplified is invalid. - transform
(Patch, Patch, Document) -> Patch: This is the traditional Operational Transform function. This is the only function which can lose information, for example if Alice and Bob both delete the same text at the same time, transform will merge those two deletions. It is critical to note that transform is only carried out upon the user's Uncommitted Work, never on any other user's work so transform's decision making cannot possibly lead to de-synchronization.
Internally the client stores a document known as the Authoritative Document this is the last known state of the document which is agreed upon by all of the clients and the Authoritative Document can only be changed as a result of an incoming Patch from the server. The difference between what the user sees in their screen and the Authoritative Document is represented by a Patch known as the Uncommitted Work.
When the user types in the document, onInsert() and onRemove() are called, creating Operations which are merged into the Uncommitted Work. As the user adds and removes text, this Patch grows. Periodically the engine transmits the Uncommitted Work to the server. When the Uncommitted Work is transmitted to the server which will broadcast it out to all clients.
When a Patch is received from the server, it is first examined for validity and discarded if it is obviously invalid. If this Patch is rooted in the current Authoritative Document, the Patch is applied to the Authoritative Document and the user's Uncommitted Work is transformed by that patch. If the Patch happens to be created by the current user, the inverse of the Patch is merged with the user's Uncommitted Work, thus removing the committed part.
If a Patch is received which does not root in the Authoritative Document, it is stored by the client in case it is actually part of the chain but other patches have not yet been filled in. If a Patch is rooted in a previous state of the document which is not the Authoritative Document, the patch is stored in case it might be part of a fork of the patch-chain which proves longer than the chain which the engine currently is aware of.
In the event that a fork of the chain becomes longer than the currently accepted chain, a "reorganization" (Bitcoin term) will occur which will cause the Authoritative Document to be rolled back to a previous state and then rolled forward along the winning chain. In the event of a "reorganization", work which the user wrote which was committed may be reverted and as the engine detects that it's own patch has been reverted, the content will be re-added to the user's Uncommitted Work to be pushed to the server next time it is synced.
The initial startup of the engine, the server is asked for all of the Messages to date. These are filtered through the engine as with any other incoming Message in a process which Bitcoin developers will recognize as "syncing the chain".
A special type of Patch is known as a Checkpoint and a checkpoint always removes and re-adds all content to the pad. The server may detect checkpoint patches because they are represented on the wire as an array with a 4 as the first element. In order to improve performance of new users joining the pad and "syncing" the chain, the server may send only the second most recent checkpoint and all patches newer than that.
Those with knowledge of Bitcoin will recognize this consensus protocol as inherently a Nakamoto Chain. Whereas Bitcoin uses blocks, each of which point to the previous block, ChainPad uses Patches each of which point to the previous state of the document. In the case of ChainPad there is of course no mining or difficulty as security is not intended by this protocol. Obviously it would be trivial to generate ever longer side-chains, causing all work to be reverted and jamming the document.
A more subtle difference is the use of "lowest hash wins" as a tie-breaker. Bitcoin very cleverly does not use "lowest hash wins" in order to prevent miners from withholding valid blocks with particularly low hashes in order to gain advantages by mining against their own block before anyone else gets a chance. Again since security is not a consideration in this design, "lowest hash wins" is used in order to expediate convergence in the event of a split.