Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Docker commands don't work with SELinux #81

Open
wants to merge 1 commit into
base: main
Choose a base branch
from
Open

Docker commands don't work with SELinux #81

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
8 changes: 4 additions & 4 deletions README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -30,13 +30,13 @@ This is (currently) very large. You can alternatively build this locally yoursel

At this stage, you can run the image, mounting the current working directory as the firmware target:

docker run -it -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3
docker run -it -v "$(pwd)"/:/firmware:Z matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3

This will leave the firmware build context in `./micropython/ports/esp32/build-tildamk6` and output the flashing command. Only the three .bin files referenced are important.

However, if you have the device plugged into the machine running the docker container you can skip straight to a flash, just mount the device and add the deploy argument when running:

docker run -it --device /dev/ttyUSB0 -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 deploy
docker run -it --device /dev/ttyUSB0 -v "$(pwd)"/:/firmware:Z matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 deploy

(Note: flashing from within Docker won't work on a Mac because of a [known issue](https://github.com/docker/for-mac/issues/900) - use `esptool` outside Docker to execute the flashing command printed at the end of the build

Expand All @@ -52,7 +52,7 @@ if you're using the electo magentic yield prototype, use:

If you need to switch which version you're building, run

docker run -it -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 clean
docker run -it -v "$(pwd)"/:/firmware:Z matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 clean

to remove the cached definitions.

Expand All @@ -62,7 +62,7 @@ You might need to force download mode on the board (by holding the Boot button d

If your serial port is on a different name then map that with docker:

docker run -it --device /dev/ttyACM0:/dev/ttyUSB0 -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 deploy
docker run -it --device /dev/ttyACM0:/dev/ttyUSB0 -v "$(pwd)"/:/firmware:Z matthewwilkes/esp_idf:4.4 IOT_SOLUTION_PATH=/firmware/esp-iot-solution TARGET=esp32s3 deploy

## Accessing the REPL

Expand Down