SPI slave with_pin functions

esp-hal/CHANGELOG.md

@@ -34,6 +34,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - GPIO ETM tasks and events now accept `InputSignal` and `OutputSignal` (#2427)
 - `spi::master::Config` and `{Spi, SpiDma, SpiDmaBus}::apply_config` (#2448)
 - `embassy_embedded_hal::SetConfig` is now implemented for `{Spi, SpiDma, SpiDmaBus}` (#2448)
+- `slave::Spi::{with_mosi(), with_miso(), with_sclk(), with_cs()}` functions (#2485)
 
 ### Changed
 
@@ -55,6 +56,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - `spi::master::Spi::new()` no longer takes `frequency` and `mode` as a parameter. (#2448)
 - Peripheral interconnections via GPIO pins now use the GPIO matrix. (#2419)
 - The I2S driver has been moved to `i2s::master` (#2472)
+- `slave::Spi` constructors no longer take pins (#2485)
 
 ### Fixed
 

esp-hal/MIGRATING-0.21.md

@@ -84,7 +84,6 @@ drivers. It is now possible to execute half-duplex and full-duplex operations on
 - The `Spi::new_half_duplex` constructor has been removed. Use `new` (or `new_typed`) instead.
 - The `with_pins` methods have been removed. Use the individual `with_*` functions instead.
 - The `with_mosi` and `with_miso` functions now take input-output peripheral signals to support half-duplex mode.
-  > TODO(danielb): this means they are currently only usable with GPIO pins, but upcoming GPIO changes should allow using any output signal.
 
 ```diff
 - let mut spi = Spi::new_half_duplex(peripherals.SPI2, 100.kHz(), SpiMode::Mode0)
@@ -131,6 +130,28 @@ The `Spi<'_, SPI, HalfDuplexMode>::read` and `Spi<'_, SPI, HalfDuplexMode>::writ
      .unwrap();
 ```
 
+## Slave-mode SPI
+
+### Driver construction
+
+The constructors no longer accept pins. Use the `with_pin_name` setters instead.
+
+```diff
+ let mut spi = Spi::new(
+     peripherals.SPI2,
+-    sclk,
+-    mosi,
+-    miso,
+-    cs,
+     SpiMode::Mode0,
+-);
++)
++.with_sclk(sclk)
++.with_mosi(mosi)
++.with_miso(miso)
++.with_cs(cs);
+```
+
 ## UART event listening
 
 The following functions have been removed:

esp-hal/src/spi/slave.rs

@@ -34,16 +34,20 @@
 //! dma_buffers!(32000);
 //! let mut spi = Spi::new(
 //!     peripherals.SPI2,
-//!     sclk,
-//!     mosi,
-//!     miso,
-//!     cs,
 //!     SpiMode::Mode0,
 //! )
-//! .with_dma(dma_channel.configure(
-//!     false,
-//!     DmaPriority::Priority0,
-//! ), rx_descriptors, tx_descriptors);
+//! .with_sck(sclk)
+//! .with_mosi(mosi)
+//! .with_miso(miso)
+//! .with_cs(cs)
+//! .with_dma(
+//!     dma_channel.configure(
+//!         false,
+//!         DmaPriority::Priority0,
+//!     ),
+//!     rx_descriptors,
+//!     tx_descriptors,
+//! );
 //!
 //! let mut receive = rx_buffer;
 //! let mut send = tx_buffer;
@@ -79,6 +83,7 @@ use crate::{
     gpio::{
         interconnect::{PeripheralInput, PeripheralOutput},
         InputSignal,
+        NoPin,
         OutputSignal,
     },
     peripheral::{Peripheral, PeripheralRef},
@@ -103,20 +108,8 @@ pub struct Spi<'d, M, T = AnySpi> {
 
 impl<'d> Spi<'d, Blocking> {
     /// Constructs an SPI instance in 8bit dataframe mode.
-    pub fn new<
-        SCK: PeripheralInput,
-        MOSI: PeripheralInput,
-        MISO: PeripheralOutput,
-        CS: PeripheralInput,
-    >(
-        spi: impl Peripheral<P = impl Instance> + 'd,
-        sclk: impl Peripheral<P = SCK> + 'd,
-        mosi: impl Peripheral<P = MOSI> + 'd,
-        miso: impl Peripheral<P = MISO> + 'd,
-        cs: impl Peripheral<P = CS> + 'd,
-        mode: SpiMode,
-    ) -> Spi<'d, Blocking> {
-        Self::new_typed(spi.map_into(), sclk, mosi, miso, cs, mode)
+    pub fn new(spi: impl Peripheral<P = impl Instance> + 'd, mode: SpiMode) -> Spi<'d, Blocking> {
+        Self::new_typed(spi.map_into(), mode)
     }
 }
 
@@ -125,55 +118,57 @@ where
     T: Instance,
 {
     /// Constructs an SPI instance in 8bit dataframe mode.
-    pub fn new_typed<
-        SCK: PeripheralInput,
-        MOSI: PeripheralInput,
-        MISO: PeripheralOutput,
-        CS: PeripheralInput,
-    >(
-        spi: impl Peripheral<P = T> + 'd,
-        sclk: impl Peripheral<P = SCK> + 'd,
-        mosi: impl Peripheral<P = MOSI> + 'd,
-        miso: impl Peripheral<P = MISO> + 'd,
-        cs: impl Peripheral<P = CS> + 'd,
-        mode: SpiMode,
-    ) -> Spi<'d, M, T> {
-        crate::into_mapped_ref!(sclk, mosi, miso, cs);
-
-        let this = Self::new_internal(spi, mode);
-
-        // TODO: with_pins et. al.
-        sclk.enable_input(true, private::Internal);
-        this.spi.info().sclk.connect_to(sclk);
-
-        mosi.enable_input(true, private::Internal);
-        this.spi.info().mosi.connect_to(mosi);
-
-        miso.set_to_push_pull_output(private::Internal);
-        this.spi.info().miso.connect_to(miso);
-
-        cs.enable_input(true, private::Internal);
-        this.spi.info().cs.connect_to(cs);
-
-        this
-    }
-
-    pub(crate) fn new_internal(spi: impl Peripheral<P = T> + 'd, mode: SpiMode) -> Spi<'d, M, T> {
+    pub fn new_typed(spi: impl Peripheral<P = T> + 'd, mode: SpiMode) -> Spi<'d, M, T> {
         crate::into_ref!(spi);
 
-        let spi = Spi {
+        let this = Spi {
             spi,
             data_mode: mode,
             _mode: PhantomData,
         };
 
-        PeripheralClockControl::reset(spi.spi.info().peripheral);
-        PeripheralClockControl::enable(spi.spi.info().peripheral);
+        PeripheralClockControl::reset(this.spi.info().peripheral);
+        PeripheralClockControl::enable(this.spi.info().peripheral);
+
+        this.spi.info().init();
+        this.spi.info().set_data_mode(mode, false);
 
-        spi.spi.info().init();
-        spi.spi.info().set_data_mode(mode, false);
+        this.with_mosi(NoPin)
+            .with_miso(NoPin)
+            .with_sck(NoPin)
+            .with_cs(NoPin)
+    }
+
+    /// Assign the SCK (Serial Clock) pin for the SPI instance.
+    pub fn with_sck(self, sclk: impl Peripheral<P = impl PeripheralInput> + 'd) -> Self {
+        crate::into_mapped_ref!(sclk);
+        sclk.enable_input(true, private::Internal);
+        self.spi.info().sclk.connect_to(sclk);
+        self
+    }
 
-        spi
+    /// Assign the MOSI (Master Out Slave In) pin for the SPI instance.
+    pub fn with_mosi(self, mosi: impl Peripheral<P = impl PeripheralInput> + 'd) -> Self {
+        crate::into_mapped_ref!(mosi);
+        mosi.enable_input(true, private::Internal);
+        self.spi.info().mosi.connect_to(mosi);
+        self
+    }
+
+    /// Assign the MISO (Master In Slave Out) pin for the SPI instance.
+    pub fn with_miso(self, miso: impl Peripheral<P = impl PeripheralOutput> + 'd) -> Self {
+        crate::into_mapped_ref!(miso);
+        miso.set_to_push_pull_output(private::Internal);
+        self.spi.info().miso.connect_to(miso);
+        self
+    }
+
+    /// Assign the CS (Chip Select) pin for the SPI instance.
+    pub fn with_cs(self, cs: impl Peripheral<P = impl PeripheralInput> + 'd) -> Self {
+        crate::into_mapped_ref!(cs);
+        cs.enable_input(true, private::Internal);
+        self.spi.info().cs.connect_to(cs);
+        self
     }
 }
 

examples/src/bin/spi_slave_dma.rs

@@ -67,19 +67,16 @@ fn main() -> ! {
 
     let (rx_buffer, rx_descriptors, tx_buffer, tx_descriptors) = dma_buffers!(32000);
 
-    let mut spi = Spi::new(
-        peripherals.SPI2,
-        slave_sclk,
-        slave_mosi,
-        slave_miso,
-        slave_cs,
-        SpiMode::Mode0,
-    )
-    .with_dma(
-        dma_channel.configure(false, DmaPriority::Priority0),
-        tx_descriptors,
-        rx_descriptors,
-    );
+    let mut spi = Spi::new(peripherals.SPI2, SpiMode::Mode0)
+        .with_sck(slave_sclk)
+        .with_mosi(slave_mosi)
+        .with_miso(slave_miso)
+        .with_cs(slave_cs)
+        .with_dma(
+            dma_channel.configure(false, DmaPriority::Priority0),
+            rx_descriptors,
+            tx_descriptors,
+        );
 
     let delay = Delay::new();
 

hil-test/tests/spi_slave.rs

@@ -130,7 +130,11 @@ mod tests {
         let miso = unsafe { miso_gpio.clone_unchecked() }.into_peripheral_output();
 
         Context {
-            spi: Spi::new(peripherals.SPI2, sclk, mosi, miso, cs, SpiMode::Mode1),
+            spi: Spi::new(peripherals.SPI2, SpiMode::Mode1)
+                .with_sck(sclk)
+                .with_mosi(mosi)
+                .with_miso(miso)
+                .with_cs(cs),
             bitbang_spi: BitbangSpi::new(sclk_gpio, mosi_gpio, miso_gpio, cs_gpio),
             dma_channel,
         }