Adjust (Temperature) Values of Tasmota connected Sensors
Rule1 ON Tele-DS18B20#Temperature do backlog var1 %value%; add1 2; Publish temp/s1 var1 ENDON
| Command | Description |
|---|---|
| TelePeriod | show publishing interval |
| TelePeriod 10 | Set to 10 seconds(10...3600sec) |
| Rule1 ON | creates Rule1 |
| Tele- | sends Data by TelePeriod interval |
| backlog | allows multiple commands in a row |
| var1 %value% | stores sensor data in variable1 |
| add1 2 | add 2 to variable1 |
| Publish temp/s1 var1 | publishes variable1 as MQTT payload |
| // |
#Rule on ENERGY#power>8 do RuleTimer1 16 endon on Rules#Timer=1 do power1 off endon
on tele-ENERGY#Current do publish ingoiot/f/4 %value% endon //only publish on teleperiod / tele- in front of sensor
#empfänger:{"Rule1":"ON","Once":"OFF","StopOnError":"OFF","Free":475,"Rules":"on Rules#Timer=1 do power1 off endon"}
rule1 on Rules#Timer=1 do power1 off endon
#sender: {"Rule1":"ON","Once":"OFF","StopOnError":"OFF","Free":403,"Rules":"on switch1#state=1 do backlog websend [192.168.43.127] #RuleTimer 80; websend [192.168.43.127] power on endon"}
rule1 on switch1#state=1 do backlog websend [192.168.43.127] RuleTimer 8; websend [192.168.43.127] power on endon