Skip to content

TLS v1.2/1.3 echo client/server application using wolfSSL that supports KTLS offload.

License

Notifications You must be signed in to change notification settings

insanum/ktls_test

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

KTLS Test

This application implements an echo client/server that operates over TLS 1.2 and TLS 1.3. Various arguments are used to configure the flow allowing for deterministic placement of TLS record headers and authentication tags across packets.

The main feature of this application is its ability to offload the flow using Linux Kernel TLS (KTLS). If the Ethernet driver support KTLS hardware offload then the flow will get offload further from the kernel to the NIC.

Building

The TLS protocol and AES-GCM support is provided by wolfSSL. The ktls_test build script will automatically download, patch, configure, and build wolfSSL. Note that the wolfSSL library does not support dynamic control of TLS 1.2 vs 1.3 on the client (i.e. connect) side of the socket. Therefore multiple client side binaries are built.

The build.sh script without any arguments builds all three binaries:

% ./build.sh

Individual binaries can be re-compiled with the following targets:

% ./build.sh server
% ./build.sh clients
% ./build.sh client_12
% ./build.sh client_13

The resulting ktls_test binaries are:

  • tls_server - supports both TLS 1.2/1.3
  • tls_client_12 - for TLS 1.2
  • tls_client_13 - for TLS 1.3

Usage

Below is the usage for the server and clients. Note that root is NOT required to run these applications.

TCP Cork

When sending data over a TCP socket there is no guarantee how the data being sent is populated across packets. When the window is open all pending data could be sent immediately in full sized packets. If the window is small then only a partial amount of the pending data could be sent. The point is for the flow, as it's seen on the wire, will not be deterministic based on the socket send calls made by the application. It is very common to see different packet sequences captured across multiple tests for the same exact data sent.

This behavior is problematic for unit testing specific KTLS edge cases where TLS record headers and authentication tags need to be located at the beginning, in the middle, or at the end of a packet. Even further whether or not the header or tag is sent in multiple packets by crossing a packet boundary.

In order to test these various conditions we must have some control over how TCP sends the data on the socket. Determinism can be achieved on Linux as the TCP/IP stack supports the TCP_CORK socket option:

TCP_CORK (since Linux 2.2) If set, don't send out partial frames. All queued partial frames are sent when the option is cleared again. This is useful for prepending headers before calling sendfile(2), or for throughput optimization. As currently implemented, there is a 200 millisecond ceiling on the time for which output is corked by TCP_CORK. If this ceiling is reached, then queued data is automatically transmitted.

Corking a socket allows us to pile up a ton of data on the socket at the TCP layer before it's packetized and sent to the NIC. This allows us to send a continuous stream of full-sized packets and based on the record size, deterministically place where the TLS headers and tags live across the packet stream.

When TCP_CORK is enabled, the client blasts all its data over multiple send calls in a tight loop. After all data is sent, the client will then start receiving the data back from the server. If left unchecked this sequence of events can lead to a TCP deadlock on the connection. Both the client and server can be stuck in send while their receive windows are full (i.e. no calls are being made to receive data off the socket, the application is single threaded). To mitigate this problem, whenever TCP_CORK is enabled the data length to send is automatically capped to the maximum window size.

Server:

% ./tls_server -h
Usage: ./tls_server [ <arguments> ] [ -b <size> ]
  -h         this usage info
  -T         enable TCP cork (default off)
  -k <dir>   KTLS direction (tx|rx|all|none) (default none)
  -b <size>  send buffer size (default 32768)
  -p <port>  port to bind to (default 4433)

The port number that the server binds to is 4433. This can be modified using the -p option.

Note that at this time the server is single threaded. While the code is structured in a way to easily spawn a thread per client connection, it was not implemented as this application targets general and specific edge cases for KTLS testing, not performance.

By default KTLS is not used for offloading TLS to the kernel and/or hardware devices. This allows the server to be tested in a non-KTLS manner while the client peer could possible be using KTLS. Use the -k option to specify the direction of the flow to offload (i.e. rx/tx/both).

The buffer size -b is used for both the recv() and send() calls on the socket. If the server has a buffer size of 2000 and the client uses only 1000 but has enabled TCP_CORK, the server will receive full 2000 byte buffers of data. If TCP_CORK was not being used by the client then the server will only receive 1000 bytes per recv() call.

Enabled TCP_CORK on the server has a minor affect on the behavior seen on the flow. If the client is using TCP_CORK then the server will be receiving and sending data much quicker and full-size packets will be seen coming from the server. If TCP_CORK is disabled then it's common to see some less than full-sized packets sprinkled throughout the stream. If the client is not using TCP_CORK then there is no affect whatsoever on the server side since the client is operating in a send/receive/repeat manner until all data has been sent.

Client:

% ./tls_client_12 -h
Usage: ./tls_client_12 [ <arguments> ] -s <ip>
  -h           this usage info
  -T           enable TCP cork (default off)
  -t           send all data then receive (default send/recv/repeat)
  -q           quiet, don't print out received data
  -k <dir>     KTLS direction (tx|rx|all|none) (default none)
  -a <aes>     AES key size (128|256) (default 128)
  -b <size>    send buffer (record) size (default 32768)
  -r <max>     use random send buffer (record) sizes (0..<max>)
  -g <length>  generate 'length' bytes (default stdin)
  -p <port>    server port to connect to (default 4433)
  -s <ip>      server IP to connect to

There are number of additional options available to the client that aren't available on the server side. This is because the client application drives most of the characteristics of the flow.

There are two client applications. tls_client_12 is used for TLS 1.2 flows and tls_client_13 is used for TLS 1.3 flows. The available arguments are the same between them. The AES key size used by TLS can also be modified with the -a argument switching between AES-128 and AES-256.

The data to be sent from by the client can come from one of three different sources:

  1. stdin - A file or any other kind of generated data can be piped directly to the client via the shell on the command line. The client will continuously read and send data from the pipe until EOF is seen.
  2. interactive - In this case the client still reads data from stdin but the data is manually entered by the user. Each line of data (i.e. up until \n) is sent on its own to the server. Exit the client application with CTRL-C.
  3. generated - The client will automatically generate data to be sent. For each bufsize amount of data to send the client fills the entire buffer with a single character. The initial character is a and it is incremented for each buffer sent. The value wraps at z. This method is nice since the alignment of initially sent record data received from the server can be seen as it's printed to the stdout after each receive call.

Note that the client prints to stdout all the data it receives back from the server. If the data being sent isn't ASCII then the terminal can get corrupted. In this case use the -q option to prevent the data from be printed to stdout.

By default when TCP_CORK is NOT enabled the client runs in a send/receive/repeat loop until all data has been sent. When TCP_CORK is enabled the client does a send all data followed by receive all data. This second method can be achieved without enabling TCP_CORK with the -t option. With -t there is still no guarantee that full-sized packets will be sent but this option does offer another mode of test that has different characteristics.

The buffer size -b is used for both the send() and recv() calls on the socket. On the send side the amount of data sent in a send() call is exactly the TLS record size generated. If the client uses a buffer size of 2000 then TLS records of length 2000 bytes will be sent. What the server receives in its recv() call is dependent on its own buffer size. The buffer size used in combination with TCP_CORK allows TLS headers and tags to be placed in specific locations with respect to the packets generated for the flow. Alternatively the -r argument can be used instead of -b which results in the client send random sized TLS records up to the max specified. This mode is obviously not deterministic but definitely can create some odd situations.

The easiest way to use the client is to have it generate its own data to be sent. This is achieved with the -g option. The length given to this argument represents the total data length to send and is independent of the buffer size. Generated data is made up of ASCII lower case characters. The first TLS record contains all a's and the second all b's, etc. The fill character used wraps at z. The method allows the user to easily see the returned record data and how it is lining up across calls to recv().

Examples

Below are a number of examples that demonstrate the various use cases for ktls_test and how it can be configured to test specific edge cases of TLS offloaded flows. They range from very basic to highly complex.

For these examples assume the server is the SUT that has the ability to offload TLS flows to a hardware device.

Lastly, assume the MTU is 1500. With TCP this results in 1448 bytes of payload per packet for TLS protocol data.


Basic user interactive input with no offload.

Server:
% tls_server

Client:
% tls_client_12 -s 172.16.0.2

Send file data with no offload.

Server:
% tls_server

Client:
% cat file.txt | tls_client_12 -s 172.16.0.2

Send 8K of generated data with no offload and a 2K buffer size.

Server:
% tls_server -b 2000

Client:
% tls_client_12 -s 172.16.0.2 -b 2000 -g 8192

Send 8K of generated data with no offload and TCP cork. Use different buffer sizes on the client/server resulting in different TLS record lengths used in each direction.

Server:
% tls_server -T -b 2000

Client:
% tls_client_12 -s 172.16.0.2 -T -b 1000 -g 8192

Send 32K of generated data with no offload, TCP cork, and random buffer sizes (1..8K) on the client. With TCP cork enabled, the traffic from the server to the client will utilize record sizes aligning with the server's buffer size.

Server:
% tls_server -T -b 2000

Client:
% tls_client_12 -s 172.16.0.2 -T -g 32768 -r 8192

Send 32K of generated data with TLS Rx offload and TCP cork.

Server:
% tls_server -T -k rx

Client:
% tls_client_12 -s 172.16.0.2 -T -g 32768

Send 32K of generated data with TLS tx offload, TCP cork, and 8K buffer sizes.

Server:
% tls_server -T -k tx -b 8000

Client:
% tls_client_12 -s 172.16.0.2 -T -g 32768 -b 8000

Send 64K of generated data with full TLS offload.

Server:
% tls_server -T -k all

Client:
% tls_client_12 -s 172.16.0.2 -T -g 65536

Send exactly 2x TLS records each 1024 bytes in size.

Server:
% tls_server -T -k all

Client:
% tls_client_12 -s 172.16.0.2 -T -g 2048 -b 1024

Send exactly 2x TLS records where the header for the second record sent crosses packet boundaries. With a 1448 payload, 13 header bytes for TLS 1.2, and 16 tag bytes... the record length must be between 1407 and 1418 bytes which forces the second header to cross the boundary between the first and second packets.

  1. pkt1 (1448 byte payload):
    • 13 header (rec1)
    • 1407 data
    • 16 tag
    • 12 header (rec2)
  2. pkt2 (1424 byte payload):
    • 1 header (rec2)
    • 1407 data
    • 16 tag
Server:
% tls_server -T -k rx

Client:
% tls_client_12 -s 172.16.0.2 -T -g 2814 -b 1407

Send exactly 3x TLS records where the tags for the records sent crosses packet boundaries. This example uses larger record sizes (approx two packets in size) and if more records were sent the tags will eventually shift to the point where they don't cross packet boundaries anymore.

  1. pkt1 (1448 byte payload):
    • 13 header (rec1)
    • 1435 data
  2. pkt2 (1448 byte payload):
    • 1436 data
    • 12 tag
  3. pkt3 (1448 byte payload):
    • 4 tag
    • 13 header (rec2)
    • 1431 data
  4. pkt4 (1448 byte payload):
    • 1440 data
    • 8 tag
  5. pkt5 (1448 byte payload):
    • 8 tag
    • 13 header (rec3)
    • 1427 data
  6. pkt6 (1448 byte payload):
    • 1444 data
    • 4 tag
  7. pkt7 (12 byte payload):
    • 12 tag
Server:
% tls_server -T -k rx

Client:
% tls_client_12 -s 172.16.0.2 -T -g 8613 -b 2871

About

TLS v1.2/1.3 echo client/server application using wolfSSL that supports KTLS offload.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published