Poseidon

Poseidon provides a command line interface for multiple OctoPrint servers.

It is Free Software and released under the GNU Affero General Public License V3.

Functionality

Currently the following features exist within Poseidon:

* Show the current status of all printers in the farm
* Select / deselect printers based on name / status

Perform the following operations on selected printers

* Set Temp of Extruder O
* Set Temp of Bed
* Send arbitrary G-Codes
* List common .gcode files
* Batch upload .gcode files
* Start Print
* Kill Print
* Home X/Y then go to pre-defined dock location

Contributing

Please contribute! This is an accidental project spawned from a need to run the BigBox print farm at E3D. I am not a seasoned python developer and accordingly there may be some things in here that upset people out there. I look forward to seeing where this goes.

Installation

Quick Instructions

1. Install the python requests module: (e.g. `sudo apt-get install python-requests`).
2. Create and change into the Poseidon directory: `mkdir Poseidon; cd Poseidon`
3. Checkout Poseidon: `git clone https://github.com/joshuarowley42/Poseidon.git`
4. Modify the config accordingly: `vim manager/config/__init__.py`
5. Run the manager: `python run.py`

Proper Instructions

1. Create and change into folder for Poseidon
2. Create a virtualenv: `virtualenv .`
3. Activate virtualenv: `source bin/activate`
4. Checkout Poseidon: `git clone https://github.com/joshuarowley42/Poseidon.git`
5. Install requirements: `pip install -r requirements.txt`
6. Run the manager: `python run.py`

Dependencies

Currently only requests.

Usage

Running Poseidon:

python run.py

Commands:

General Commands
ls      - Lists printers and state. NOTE: DOES NOT UPDATE STATE
u       - Update state of all printers.

Printer Selection
s xxxx  - Select printers by name / status. No args selects all.
d xxxx  - Deselect printers by name / status. No args deselects all.

Printer Actions
t xx    - Set HotEnd 0 Temp
b xx    - Set Bed Temp
g xx    - Send arbitrary GCodes
dock    - Home X & Y. Go to Dock.
script xx - Run Gcode Script (defined in config/__init__.py)

File Actions
f       - List files common to selected printers
upload  - Upload all files in uplaod folder to selected printers (see config/__init__.py)

Job Actions
p x.gcode   - Print named file
kill        - Kill current job

Special Thanks

We are standing on the shoulders of giants. Thanks to the OctoPrint project.