This is a Local Push integration for Philips airpurifiers. Currently only encrypted-CoAP is implemented.

Word of Caution

Due to a bug in the Philips devices, this integration is rather instable. It might or might not work. Even if it seems ok at first, it might stop working after a while. Sometimes, a power cycle of the Philips device helps. Sometimes, only a power cycle and a Home Assistant restart together help. It is frustrating. Do not report this as an issue here. Nobody can help right now. @mhetzi contributed timer code to attempt reconnects if the device is not responsive. Sometimes, that helps. But not always. You've been warned.

It all goes back to some reverse engineering by @rgerganov and you can read about it here: https://xakcop.com/post/ctrl-air-purifier/

Philips has recently introduced a proper API to remote control the devices. However, this only works with the Philips cloud and it is not public (yet?) but only integrates Google Home and Alexa. It used to integrate IFTTT as well, but that seems discontinued.

Credits

• Original reverse engineering done by @rgerganov at https://github.com/rgerganov/py-air-control
• The base of the current integration has been done by @betaboon at https://github.com/betaboon/philips-airpurifier-coap but apparently this is not maintained anymore.
• The rework has been done by @Denaun at https://github.com/Denaun/philips-airpurifier-coap
• Obviously, many other people contributed, notably @mhetzi, @Kraineff and @shexbeer

Coffee

Install

Configuration

• The integration attempts to autodiscover your purifiers. Autodiscovery is based on the MAC address and original hostname of the devices. Home Assistant will notify you, if that is successful.
• Alternatively, go to Configuration -> Devices & Services
• Click Add Integration
• Search for Philips AirPurifier and select it
• Enter the hostname / IP address of your device
• The model type is detected automatically. You get a warning in the log, if it is not supported.

Note: configuration.yaml is no longer supported and your configuration is not automatically migrated. You have to start fresh.

Re-configuration

• Should your devices change their IP address on the network, they need to be re-configured
• If autodiscovery works for your device and network, Home Assistant will discover the device again (latest at the next restart) and identify that it knows it already. The IP address is then automatically adjusted and no user interaction is needed.
• If autodiscovery doesn't work for you, you can simply add the device again as described above, using its new IP address. Home Assistant will detect that it knows the device already and adjust the configuration.

Supported models

Note: Some of these models seem to have a newer firmware that does not allow local connections anymore. If you buy the device with the intention to manage it via Home Assistant, make sure you can return it, if the integration doesn't work for you.

• AC0850/11 AWS_Philips_AIR
• AC0850/11 AWS_Philips_AIR_Combo
• AC0850/20 AWS_Philips_AIR
• AC0850/20 AWS_Philips_AIR_Combo
• AC0850/31
• AC0950
• AC0951
• AC1214
• AC1715
• AC2729
• AC2889
• AC2936
• AC2939
• AC2958
• AC2959
• AC3033
• AC3036
• AC3039
• AC3055
• AC3059
• AC3210
• AC3220
• AC3221
• AC3421
• AC3259
• AC3737
• AC3829
• AC3836
• AC3854/50
• AC3854/51
• AC3858/50
• AC3858/51
• AC3858/83
• AC3858/86
• AC4220
• AC4221
• AC4236
• AC4550
• AC4558
• AC5660
• AC5659
• AMF765
• AMF870
• CX5120
• CX3550

Is your model not supported yet?

You can help to get us there.

Please open an issue and provide the raw status-data for each combination of modes and speeds for your model.

To aquire those information please follow these steps:

Prepare the environment

Create yourself a virtual environment

python -m venv env
source ./env/bin/activate

Install aioairctrl package inside the virtual environment

python -m pip install aioairctrl

Aquire raw status-data

• Use the philips-app to activate a mode or speed
• run the following command to aquire the raw data (still in the virtual environment)

aioairctrl --host $DEVICE_IP status --json

to exit the virtual environment, simply type

deactivate

Debugging

To aquire debug-logs, add the following to your configuration.yaml:

logger:
  logs:
    custom_components.philips_airpurifier_coap: debug
    coap: debug
    aioairctrl: debug

logs should now be available in home-assistant.log

Usage

Entities

The integration provides fan entities for your devices which are documented here.

It also provides a number of sensor entities for the air quality and other data measured by the device, as well as some diagnostic sensor entities with information about the filter or water fill level for humidifiers. A switch entity allows you to control the child lock function, should your device have one. Finally, there are some light entities to control the display backlight and the brightness of the air quality display and some select entities to set the humidification function on the devices that have that.

Services

Unlike the original philips_airpurifier_coap integration, this version does not provide any additional services anymore. Everything can be controlled through the entities provided.

Attributes

The fan entity has some additional attributes not captured with sensors. Specifcs depend on the model. The following list gives an overview:

attribute	content	example
name:	Name of the device	bedroom
type:	Configured model	AC2729
model_id:	Philips model ID	AC2729/10
product_id:	Philips product ID	85bc26fae62611e8a1e3061302926720
device_id:	Philips device ID	3c84c6c8123311ebb1ae8e3584d00715
software_version:	Installed software version on device	0.2.1
wifi_version:	Installed WIFI version on device	[email protected]
error_code:	Philips error code	49408
error:	Error in clear text	no water
preferred_index:	State of preferred air quality index	PM2.5, IAI
runtime:	Time the device is running in readable text	9 days, 10:44:41

Icons

The integration also provides the original Philips icons for your use in the frontend. The icons can be accessed with the prefix pap: and should be visible in the icon picker. Credit for this part of the code goes to @thomasloven

icon	name
	power_button
	child_lock_button
	auto_mode_button
	fan_speed_button
	humidity_button
	light_dimming_button
	light_function
	two_in_one_mode_button
	timer_reset_button
	sleep_mode
	auto_mode
	speed_1
	speed_2
	speed_3
	allergen_mode
	purification_only_mode
	two_in_one_mode
	bacteria_virus_mode
	pollution_mode
	nanoprotect_filter
	filter_replacement
	water_refill
	prefilter_clearning
	prefilter_wick_cleaning
	pm25
	iai
	wifi
	reset
	circulate
	clean
	mode
	pm25b
	rotate
	oscillate
	heating
	gas

Note: you might have to clear your browser cache after installation to see the icons.