feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 #449

renovate · 2023-07-21T21:42:34Z

This PR contains the following updates:

Package	Update	Change
ghcr.io/home-assistant/home-assistant (source)	minor	`2023.7.2` -> `2023.12.4`

Warning

Some dependencies could not be looked up. Check the Dependency Dashboard for more information.

Release Notes

home-assistant/core (ghcr.io/home-assistant/home-assistant)

`v2023.12.4`

Compare Source

Pass timeout to httpx in RESTful Switch (@vexofp - #105364) (rest docs)
Add Raspberry Pi 5 specific container image (@agners - #105488)
Set todo item status in intent (@synesthesiam - #105743) (todo docs)
Bump aioairzone to v0.7.0 (@Noltari - #105807) (airzone docs) (dependency)
Update aioairzone to v0.7.2 (@Noltari - #105811) (airzone docs) (dependency)
Fix HVAC mode duplication for Shelly Gen2 climate platform (@bieniu - #105812) (shelly docs)
Fix Airzone temperature range on new climate card (@Noltari - #105830) (airzone docs)
Bump pyunifiprotect to 4.22.3 (@bdraco - #105833) (unifiprotect docs) (dependency)
Address late review comments on AVM FRITZ!SmartHome (@mib1185 - #105860) (fritzbox docs)
Set WiFi QR code entity to unknown when Fritzbox is not available (@mib1185 - #105870) (fritz docs)
Bump reolink_aio to 0.8.3 (@starkillerOG - #105489) (reolink docs) (dependency)
Bump reolink_aio to 0.8.4 (@starkillerOG - #105946) (reolink docs) (dependency)
Bump motionblinds to 0.6.19 (@starkillerOG - #105951) (motion_blinds docs) (dependency)
Fix unreachable Netatmo sensor returning false values (@cgtobi - #105954) (netatmo docs)
Add Raspberry Pi 5 to version and hardware integration (@agners - #105992) (hassio docs) (version docs) (raspberry_pi docs)
Bump blinkpy 0.22.4 (@mkmer - #105993) (blink docs)
Don't fetch unchanged OurGroceries lists (@OnFreund - #105998) (ourgroceries docs)
Bump pyatmo to 8.0.1 (@cgtobi - #106094) (netatmo docs)
Bump surepy to 0.9.0 (@benleb - #106101) (surepetcare docs) (dependency)
Bump pyenphase to 1.15.2 (@bdraco - #106134) (enphase_envoy docs) (dependency)
Bump ZHA dependencies (@puddly - #106147) (zha docs) (dependency)
Bump life360 to 6.0.1 (@pnbruckner - #106149) (life360 docs)
Fix bug with non-existent Notion bridge IDs (@bachya - #106152) (notion docs)
Fix Netatmo light switching states by assuming state until next update (@cgtobi - #106162) (netatmo docs)
Bump Devialet to 1.4.4 (@fwestenberg - #106171) (devialet docs)
Bump ring-doorbell to 0.8.5 (@sdb9696 - #106178) (ring docs) (dependency)
Bump Devialet to 1.4.5 (@fwestenberg - #106184) (devialet docs)
Bump aiopulse to 0.4.4 (@atmurray - #106239) (acmeda docs) (dependency)
Fix Shelly consumption_types (@emontnemery - #106273) (shelly docs)
Missing exception on relogin in Honeywell (@mkmer - #106324) (honeywell docs)
Redact unique id from diagnostics in blink (@mkmer - #106413) (blink docs)

`v2023.12.3`

Compare Source

Ensure platform setup for all AVM FRITZ!SmartHome devices (@mib1185 - #105515) (fritzbox docs)
Update AEMET-OpenData to v0.4.7 (@Noltari - #105676) (aemet docs) (dependency)
Fix restoring UniFi clients with old unique id (@Kane610 - #105691) (unifi docs)
Bump zeroconf to 0.128.5 (@bdraco - #105694) (zeroconf docs) (dependency)
Add missing rest_command reload service to services.yaml (@jpbede - #105714) (rest_command docs)
Fix issue clearing renault schedules (@epenet - #105719) (renault docs) (dependency)
Fix Fully Kiosk Browser MQTT event callbacks with non-standard event topics (@cgarwood - #105735) (fully_kiosk docs)
Disable user profiles on login screen (@frenck - #105749) (auth docs) (person docs) (breaking-change)

`v2023.12.2`

Compare Source

Fix Lyric LCC thermostats auto mode (@apt-itude - #104853) (lyric docs)
Bump zeroconf to 0.128.0 (@bdraco - #104936) (zeroconf docs) (dependency)
Fix CI test_invalid_rrule_fix test by freezing the time (@jbouwh - #105294) (google docs)
Add missing configuration for services.yaml in blink (@mkmer - #105310) (blink docs)
Bump pyschlage to 2023.12.0 (@dknowles2 - #105349) (schlage docs) (dependency)
Fix preset modes error in Smartthings (@gjohansson-ST - #105375) (smartthings docs)
Fix service missing key in Blink (@mkmer - #105387) (blink docs)
Fix adding/updating todo items with due date in CalDAV integration (@DerFlob - #105435) (caldav docs)
Check if heat area exists when setting up valve opening and battery sensors in moehlenhoff alpha2 (@j-a-n - #105437) (moehlenhoff_alpha2 docs)
Bump hatasmota to 0.8.0 (@emontnemery - #105440) (tasmota docs)
Bump plugwise to v0.35.3 (@bouwew - #105442) (plugwise docs) (dependency)
Fix alexa calling not featured cover services (@jbouwh - #105444) (alexa docs)
Fix fitbit oauth reauth debug logging (@allenporter - #105450) (fitbit docs)
Write Enphase Envoy data to log when in debug mode (@catsmanac - #105456) (enphase_envoy docs)
Bump ical to 6.1.1 (@allenporter - #105462) (local_calendar docs) (local_todo docs) (dependency)
Bump zeroconf to 0.128.4 (@bdraco - #105465) (zeroconf docs) (dependency)
Remove Aftership import issue when entry already exists (@joostlek - #105476) (aftership docs)
Disconnect before reconnecting to satellite (@synesthesiam - #105500) (wyoming docs)
Bump caldav to 1.3.8 (@FrnchFrgg - #105508) (caldav docs)
Bump pyhiveapi to v0.5.16 (@KJonline - #105513) (hive docs) (dependency)
Fix setup Fast.com (@gjohansson-ST - #105580) (fastdotcom docs)
Add name slot to HassClimateGetTemperature intent (@synesthesiam - #105585) (climate docs)
Skip TTS events entirely with empty text (@synesthesiam - #105617) (assist_pipeline docs)
Rename "satellite enabled" to "mute" (@synesthesiam - #105619) (wyoming docs)
Fix timing issue in Withings (@joostlek - #105203) (withings docs)
Update pylint to 3.0.3 (@cdce8p - #105491) (mqtt docs) (zha docs) (improv_ble docs) (dependency)
Reload ZHA integration on any error, not just recoverable ones (@puddly - #105659) (zha docs)
Bump ZHA dependencies (@puddly - #105661) (zha docs) (dependency)

`v2023.12.1`

Compare Source

Initialize energy_state without price (@Excentyl - #97031) (energy docs)
Bump yolink-api to 0.3.4 (@matrixd2 - #105124) (yolink docs) (dependency)
Bump apple_weatherkit to 1.1.2 (@tjhorner - #105140) (weatherkit docs) (dependency)
Correct smtp error message string (@jbouwh - #105148) (smtp docs)
Expose todo entities to Assist by default (@synesthesiam - #105150) (homeassistant docs)
Disable scenarios (scenes) for local API in Overkiz (@iMicknl - #105153) (overkiz docs)
Improve LIDL christmas light detection in deCONZ (@Kane610 - #105155) (deconz docs)
Bump reolink_aio to 0.8.2 (@starkillerOG - #105157) (reolink docs) (dependency)
Don't return TTS URL in Assist pipeline (@synesthesiam - #105164) (assist_pipeline docs)
Bump Météo-France to 1.3.0 (@Quentame - #105170) (meteo_france docs) (dependency)
Fix ZHA quirk ID custom entities matching all devices (@TheJulianJES - #105184) (zha docs)
Fix missing apostrophe in smtp (@lunmay - #105189) (smtp docs)
Set ping interval to 15 seconds instead of 5 minutes (@nohn - #105191) (ping docs)
Increase ping update interval to 30 seconds (@jpbede - #105199) (ping docs)
Fix bug in roon incremental volume control. (@pavoni - #105201) (roon docs)
fix supportedFanOscillationModes is null (@haimn - #105205) (smartthings docs)
Disable config flow progress in peco config flow (@emontnemery - #105222) (peco docs)
Fix Fritzbox light setup (@flabbamann - #105232) (fritzbox docs)
Fix check_date service in workday (@gjohansson-ST - #105241) (workday docs)
Fix AsusWrt invalid data type with tuple type (@ollo69 - #105247) (asuswrt docs)
Explicit check for None in Discovergy entity if condition (@jpbede - #105248) (discovergy docs)
Add migration for old HomeWizard sensors (@DCSBL - #105251) (homewizard docs)
Fix update of uncategorized OurGroceries items (@OnFreund - #105255) (ourgroceries docs)
Bump pyunifiprotect to 4.22.0 (@bdraco - #105265) (unifiprotect docs) (dependency)
Set device id and forward errors to Wyoming satellites (@synesthesiam - #105266) (wyoming docs)
Fix mqtt json light state updates using deprecated color handling (@jbouwh - #105283) (mqtt docs)
Always set _attr_current_option in Nobø Hub select entities (@oyvindwe - #105289) (nobo_hub docs)
Update frontend to 2023120.2 (@piitaya - #105299) (frontend docs)
Add test for energy cost sensor for late price sensor (@emontnemery - #105312) (energy docs)
Use area id for context instead of name (@synesthesiam - #105313) (conversation docs)
Add workaround for orjson not handling subclasses of str (@emontnemery - #105314)
Add rollback on exception that needs rollback in SQL (@gjohansson-ST - #104948) (sql docs)
Workaround to_json template filter in parsing dict key (@jbouwh - #105327)
Bump plugwise to v0.34.5 (@bouwew - #105330) (plugwise docs) (dependency)

`v2023.12.0`

Compare Source

https://www.home-assistant.io/blog/2023/12/06/release-202312/

`v2023.11.3`

Compare Source

Bump accuweather to version 2.0.1 (@bieniu - #103532) (accuweather docs) (dependency)
Remove rainbird yaml config test fixtures (@allenporter - #103607) (rainbird docs)
Lock Withings token refresh (@joostlek - #103688) (withings docs)
Bump accuweather to version 2.1.0 (@bieniu - #103744) (accuweather docs) (dependency)
Bump python-matter-server to 4.0.2 (@bdraco - #103760) (matter docs) (dependency)
Bump subarulink to 0.7.9 (@G-Two - #103761) (subaru docs) (dependency)
Fix discovery schema for Matter switches (@marcelveldt - #103762) (matter docs)
Fix raising vol.Invalid during mqtt config validation instead of ValueError (@jbouwh - #103764) (mqtt docs)
Fix race condition in Matter unsubscribe method (@marcelveldt - #103770) (matter docs)
Fix typo in calendar translation (@jrieger - #103789) (calendar docs)
Fix Rainbird unique to use a more reliable source (mac address) (@allenporter - #101603) (rainbird docs)
Bump pyOverkiz to 1.13.0 (@iMicknl - #103582) (overkiz docs) (dependency)
Bump pyOverkiz to 1.13.2 (@iMicknl - #103790) (overkiz docs) (dependency)
Bump aiocomelit to 0.5.2 (@chemelli74 - #103791) (comelit docs) (dependency)
Bump velbusaio to 2023.11.0 (@Cereal2nd - #103798) (velbus docs) (dependency)
Bump pyunifiprotect to 4.21.0 (@bdraco - #103832) (unifiprotect docs) (dependency)
Bump lupupy to 0.3.1 (@suaveolent - #103835) (lupusec docs) (dependency)
Bump gcal_sync to 6.0.1 (@allenporter - #103861) (google docs) (dependency)
Fix bug in Fitbit config flow, and switch to prefer display name (@allenporter - #103869) (fitbit docs)
Fix for Google Calendar API returning invalid RRULE:DATE rules (@allenporter - #103870) (google docs)
Update Fitbit to avoid a KeyError when restingHeartRate is not present (@allenporter - #103872) (fitbit docs)
fix Comelit cover stop (@chemelli74 - #103911) (comelit docs)
Fix Coinbase for new API Structure (@TomBrien - #103930) (coinbase docs)
Bump zwave-js-server-python to 0.54.0 (@raman325 - #103943) (zwave_js docs) (dependency)
Update smarttub to 0.0.36 (@mdz - #103948) (smarttub docs)
Fix duplicate Ban file entries (@fosterchuck - #103953) (http docs)
Fix openexchangerates form data description (@MartinHjelmare - #103974) (openexchangerates docs)
Fix emulated_hue with None values (@bdraco - #104020) (emulated_hue docs)
Fix netatmo authentication when using cloud authentication credentials (@deosrc - #104021) (netatmo docs)
Fix device tracker see gps accuracy selector (@MartinHjelmare - #104022) (device_tracker docs)
Bump pyenphase to 1.14.3 (@catsmanac - #104101) (enphase_envoy docs) (dependency)
Fix ESPHome BLE client raising confusing error when not connected (@bdraco - #104146) (esphome docs)
Fix memory leak in ESPHome disconnect callbacks (@bdraco - #104149) (esphome docs)
Add debug logging for which adapter is used to connect bluetooth devices (@bdraco - #103264) (bluetooth docs)
Prevent Bluetooth reconnects from blocking shutdown (@bdraco - #104150) (bluetooth docs)
Bump boschshcpy to 0.2.75 (@tschamm - #104159) (bosch_shc docs)
Fix Local To-do list bug renaming items (@allenporter - #104182) (local_todo docs)
Bump aiosomecomfort to 0.0.22 (@mkmer - #104202) (honeywell docs)
Increase Tomato request timeout (@ertechdesign - #104203) (tomato docs)
Fix imap does not decode text body correctly (@jbouwh - #104217) (imap docs)
Fix mqtt json light allows to set brightness value >255 (@jbouwh - #104220) (mqtt docs)
Handle attributes set to None in prometheus (@knyar - #104247) (prometheus docs)
Catch ClientOSError in renault integration (@epenet - #104248) (renault docs)
Restore removed guard for non-string inputs in Alexa (@jbouwh - #104263) (alexa docs)
Bump bimmer_connected to 0.14.3 (@rikroe - #104282) (bmw_connected_drive docs) (dependency)
Bump pyrainbird to 4.0.1 (@allenporter - #104293) (rainbird docs) (dependency)
Bump pychromecast to 13.0.8 (@emontnemery - #104320) (cast docs)
Bump ical to 6.0.0 (@allenporter - #103482) (local_calendar docs) (local_todo docs) (dependency)
Bump ical to 6.1.0 (@allenporter - #103759) (local_calendar docs) (local_todo docs) (dependency)

`v2023.11.2`

Compare Source

Don't assume that the sleep value is a dictionary in Tractive integration (@bieniu - #103138) (tractive docs)
Update aioairzone-cloud to v0.3.2 (@Noltari - #103258) (airzone_cloud docs) (dependency)
Update aioairzone-cloud to v0.3.5 (@Noltari - #103315) (airzone_cloud docs) (dependency)
Handle null data in WeatherFlow sensors (@natekspencer - #103349) (weatherflow docs)
Handle smarttub sensor values being None (@mdz - #103385) (smarttub docs) (dependency)
Pin jaraco.functools to fix builds and CI (@bdraco - #103406) (abode docs) (dependency)
Update tailscale to 0.6.0 (@frenck - #103409) (tailscale docs) (dependency)
Bump pyatmo to v7.6.0 (@cgtobi - #103410) (netatmo docs)
Fix serial in Flo device information (@mib1185 - #103427) (flo docs)
modbus Allow swap: byte for datatype: string. (@janiversen - #103441) (modbus docs)
Modbus set device_class in slaves (@janiversen - #103442) (modbus docs)
Fix KNX expose default value when attribute is None (@farmio - #103446) (knx docs)
Sort Withings sleep data on end date (@joostlek - #103454) (withings docs)
Use right equipment identifier in DSMR setup (@dupondje - #103494) (dsmr docs)
Fix litterrobot test failure due to time zone dependence (@mdz - #103444) (litterrobot docs)
Revert binary_sensor part of #103210 (@edenhaus - #103499) (mqtt docs)
ESPHome: Add suggested_area from device info (@jesserockz - #102834) (esphome docs)
Bump aioesphomeapi to 18.2.1 (@bdraco - #103156) (esphome docs) (dependency)
Bump bluetooth-data-tools to 0.14.0 (@bdraco - #103413) (esphome docs) (bluetooth docs) (led_ble docs) (ld2410_ble docs) (private_ble_device docs) (dependency)
Bump blinkpy to 0.22.3 (@mkmer - #103438) (blink docs) (dependency)
Fix 5B Gas meter in dsmr (@dupondje - #103506) (dsmr docs)
Fix invalid MAC in samsungtv (@epenet - #103512) (samsungtv docs)
Bump aioesphomeapi to 18.2.4 (@bdraco - #103552) (esphome docs) (dependency)
Bump pyenphase to 1.14.2 (@cgarwood - #103553) (enphase_envoy docs) (dependency)
Update dsmr-parser to 1.3.1 to fix parsing issues (@dupondje - #103572) (dsmr docs) (dependency)
fix: get_devices only checks for the first type (@suaveolent - #103583) (lupusec docs)
Raise exception when data can't be fetched in Opensky (@joostlek - #103596) (opensky docs)
Bump yt-dlp to 2023.10.13 (@joostlek - #103616) (media_extractor docs) (dependency)
Fix Reolink DHCP IP update (@starkillerOG - #103654) (reolink docs)
Incease tplink setup timeout (@bdraco - #103671) (tplink docs)
Add name to Withings coordinator (@joostlek - #103692) (withings docs)
Update frontend to 2023103.2 (@bramkragten - #103706) (frontend docs)

`v2023.11.1`

Compare Source

Bump python-holidays to 0.35 (@gjohansson-ST - #103092) (workday docs) (dependency)
Bump aiowaqi to 3.0.0 (@joostlek - #103166) ([waqi docs]) (dependency)
Catch unexpected response in Honeywell (@mkmer - #103169) (honeywell docs)
Fix roomba translation key mismatch (@Xitee1 - #103191) ([roomba docs])
Fix roomba error if battery stats are not available (@Xitee1 - #103196) ([roomba docs])
Fix mqtt config validation error handling (@jbouwh - #103210) (mqtt docs)
Fix Fronius entity initialisation (@farmio - #103211) (fronius docs)
Bump pyenphase to 1.14.1 (@cgarwood - #103239) (enphase_envoy docs)
Remove measurement flag from timestamp in gardena bluetooth (@elupus - #103245) ([gardena_bluetooth docs])
Fix Plugwise Schedule selection (@CoMPaTech - #103262) (plugwise docs)
Bump yalexs-ble to 2.3.2 (@bdraco - #103267) (august docs) ([yalexs_ble docs]) (dependency)
add library logger info on ecoforest integration manifest (@pjanuario - #103274) (ecoforest docs)
Fix Matter 1.2 locks with specific unlatch/unbolt support (@marcelveldt - #103275) (matter docs)
Fix firmware update failure (@raman325 - #103277) (zwave_js docs)
Bump opower to 0.0.39 (@tronikos - #103292) ([opower docs]) (dependency)
Bump reolink-aio to 0.7.14 and improve typing of Reolink (@starkillerOG - #103129) (reolink docs)
Bump py_nextbusnext to v1.0.2 to fix TypeError (@ViViDboarder - #103214) ([nextbus docs]) (dependency)
Add script to convert zwave_js device diagnostics to fixture (@raman325 - #102799) (zwave_js docs)
Fix typo in Todoist config flow (@jpbede - #103317) ([todoist docs])
Remove extra from traccar webhook (@ludeeus - #103319) ([traccar docs])
Report correct weather condition at night for Met (@jrieger - #103334) ([met docs])
Handle UniFi traffic rules not supported on older versions (@Kane610 - #103346) (unifi docs)
Fix sensor unique id in Islamic prayer times (@engrbm87 - #103356) ([islamic_prayer_times docs])
Fix zwave_js cover bug for Window Covering CC values (@raman325 - #103289) (zwave_js docs)

[

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR has been generated by Mend Renovate. View repository job log here.

github-advanced-security · 2023-07-21T21:44:29Z

This pull request sets up GitHub code scanning for this repository. Once the scans have completed and the checks have passed, the analysis results for this pull request branch will appear on this overview. Once you merge this pull request, the 'Security' tab will show more code scanning analysis results (for example, for the default branch). Depending on your configuration and choice of analysis tool, future pull requests will be annotated with code scanning analysis results. For more information about GitHub code scanning, check out the documentation.

…o v2023.12.4 | datasource | package | from | to | | ---------- | ------------------------------------- | -------- | --------- | | docker | ghcr.io/home-assistant/home-assistant | 2023.7.2 | 2023.12.4 |

renovate bot requested a review from leewardbound as a code owner July 21, 2023 21:42

renovate bot added renovate/container type/patch labels Jul 21, 2023

renovate bot changed the title ~~fix(container): update image ghcr.io/home-assistant/home-assistant to v2023.7.3~~ fix(container): update image ghcr.io/home-assistant/home-assistant to v2023.7.3 - autoclosed Aug 1, 2023

renovate bot closed this Aug 1, 2023

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch August 1, 2023 20:08

renovate bot changed the title ~~fix(container): update image ghcr.io/home-assistant/home-assistant to v2023.7.3 - autoclosed~~ fix(container): update image ghcr.io/home-assistant/home-assistant to v2023.7.3 Aug 1, 2023

renovate bot reopened this Aug 1, 2023

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch August 1, 2023 22:46

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 05de4b0 to 4bb5471 Compare August 1, 2023 22:46

renovate bot changed the title ~~fix(container): update image ghcr.io/home-assistant/home-assistant to v2023.7.3~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.0 Aug 2, 2023

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 4bb5471 to f1a7557 Compare August 2, 2023 22:37

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.0~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1 Aug 4, 2023

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from f1a7557 to 83d505a Compare August 4, 2023 20:01

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1 - autoclosed Aug 9, 2023

renovate bot closed this Aug 9, 2023

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch August 9, 2023 00:25

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1 - autoclosed~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1 Aug 9, 2023

renovate bot reopened this Aug 9, 2023

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch August 9, 2023 03:40

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 83d505a to 9e79749 Compare August 9, 2023 03:40

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.1~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.2 Aug 12, 2023

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 9e79749 to ea82a2b Compare August 12, 2023 00:05

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.2~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.3 Aug 18, 2023

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch 2 times, most recently from 531293f to a222526 Compare August 24, 2023 21:10

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.3~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.4 Aug 24, 2023

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.4~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.8.4 - autoclosed Sep 4, 2023

renovate bot closed this Sep 4, 2023

renovate bot closed this Jan 6, 2024

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch January 6, 2024 18:49

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 Jan 6, 2024

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch January 6, 2024 22:10

renovate bot reopened this Jan 6, 2024

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 317cf82 to 6f3e39f Compare January 6, 2024 22:10

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed Jan 30, 2024

renovate bot closed this Jan 30, 2024

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch January 30, 2024 21:29

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch January 31, 2024 02:07

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 Jan 31, 2024

renovate bot reopened this Jan 31, 2024

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 6f3e39f to c615e3a Compare January 31, 2024 02:07

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed Feb 21, 2024

renovate bot closed this Feb 21, 2024

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch February 21, 2024 15:41

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch February 21, 2024 19:35

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 Feb 21, 2024

renovate bot reopened this Feb 21, 2024

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from c615e3a to 6f60833 Compare February 21, 2024 19:35

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed May 7, 2024

renovate bot closed this May 7, 2024

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch May 7, 2024 22:35

renovate bot changed the title ~~feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 May 8, 2024

renovate bot reopened this May 8, 2024

renovate bot restored the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch May 8, 2024 00:13

feat(container): update image ghcr.io/home-assistant/home-assistant t…

33797ae

…o v2023.12.4 | datasource | package | from | to | | ---------- | ------------------------------------- | -------- | --------- | | docker | ghcr.io/home-assistant/home-assistant | 2023.7.2 | 2023.12.4 |

renovate bot force-pushed the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch from 6f60833 to 33797ae Compare May 8, 2024 00:13

leewardbound closed this May 21, 2024

renovate bot deleted the renovate/ghcr.io-home-assistant-home-assistant-2023.x branch May 21, 2024 22:14

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 #449

feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 #449

renovate bot commented Jul 21, 2023 •

edited

Loading

github-advanced-security bot commented Jul 21, 2023

feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 #449

feat(container): update image ghcr.io/home-assistant/home-assistant to v2023.12.4 #449

Conversation

renovate bot commented Jul 21, 2023 • edited Loading

Release Notes

Configuration

github-advanced-security bot commented Jul 21, 2023

renovate bot commented Jul 21, 2023 •

edited

Loading