GEOMESA-3435. mention scylladb in docs

README.md

@@ -29,7 +29,7 @@ geospatial analytics.
 * Quick Starts:
   [Accumulo](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-accumulo.html) |
   [HBase](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-hbase.html) |
-  [Cassandra](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-cassandra.html) |
+  [Cassandra / ScyllaDB](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-cassandra.html) |
   [Kafka](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-kafka.html) |
   [Redis](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-redis.html) |
   [FileSystem](https://www.geomesa.org/documentation/current/tutorials/geomesa-quickstart-fsds.html)
@@ -42,7 +42,7 @@ geospatial analytics.
       
   [**Accumulo**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-accumulo_2.12-5.1.0-bin.tar.gz) |
   [**HBase**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-hbase_2.12-5.1.0-bin.tar.gz) |
-  [**Cassandra**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-cassandra_2.12-5.1.0-bin.tar.gz) |
+  [**Cassandra / ScyllaDB**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-cassandra_2.12-5.1.0-bin.tar.gz) |
   [**Kafka**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-kafka_2.12-5.1.0-bin.tar.gz) |
   [**Redis**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-redis_2.12-5.1.0-bin.tar.gz) |
   [**FileSystem**](https://github.com/locationtech/geomesa/releases/download/geomesa-5.1.0/geomesa-fs_2.12-5.1.0-bin.tar.gz) |

build/templates/README.md

@@ -29,7 +29,7 @@ geospatial analytics.
 * Quick Starts:
   [Accumulo](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-accumulo.html) |
   [HBase](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-hbase.html) |
-  [Cassandra](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-cassandra.html) |
+  [Cassandra / ScyllaDB](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-cassandra.html) |
   [Kafka](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-kafka.html) |
   [Redis](https://www.geomesa.org/documentation/tutorials/geomesa-quickstart-redis.html) |
   [FileSystem](https://www.geomesa.org/documentation/current/tutorials/geomesa-quickstart-fsds.html)
@@ -42,7 +42,7 @@ geospatial analytics.
       
   [**Accumulo**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-accumulo_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
   [**HBase**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-hbase_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
-  [**Cassandra**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-cassandra_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
+  [**Cassandra / ScyllaDB**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-cassandra_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
   [**Kafka**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-kafka_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
   [**Redis**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-redis_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |
   [**FileSystem**](https://github.com/locationtech/geomesa/releases/download/geomesa-${geomesa.release.version}/geomesa-fs_${scala.binary.version}-${geomesa.release.version}-bin.tar.gz) |

docs/common.py

@@ -99,6 +99,8 @@
 
 .. |cassandra_version| replace:: 3
 
+.. |scylladb_version| replace:: 6.2
+
 .. |redis_supported_versions| replace:: versions 5.0 and later
 
 .. |spark_required_version| replace:: %(spark_version)s

docs/tutorials/geomesa-quickstart-cassandra.rst

@@ -1,7 +1,7 @@
-GeoMesa Cassandra Quick Start
-=============================
+GeoMesa Cassandra / ScyllaDB Quick Start
+========================================
 
-This tutorial is the fastest and easiest way to get started with GeoMesa using Cassandra.
+This tutorial is the fastest and easiest way to get started with GeoMesa using Cassandra / ScyllaDB.
 It is a good stepping-stone on the path to the other tutorials, that present increasingly
 involved examples of how to use GeoMesa.
 
@@ -12,9 +12,9 @@ In the spirit of keeping things simple, the code in this tutorial only
 does a few small things:
 
 1. Establishes a new (static) SimpleFeatureType
-2. Prepares the Cassandra tables to store this type of data
+2. Prepares the Cassandra / ScyllaDB tables to store this type of data
 3. Creates a few thousand example SimpleFeatures
-4. Writes these SimpleFeatures to Cassandra
+4. Writes these SimpleFeatures to Cassandra / ScyllaDB
 5. Queries for a given geographic rectangle, time range, and attribute
    filter, writing out the entries in the result set
 6. Uses GeoServer to visualize the data (optional)
@@ -27,22 +27,22 @@ Before you begin, you must have the following installed and configured:
 -  `Java <https://adoptium.net/temurin/releases/>`__ JDK 1.8
 -  Apache `Maven <https://maven.apache.org/>`__ |maven_version|
 -  a GitHub client
--  a Cassandra |cassandra_version| instance, either standalone or cluster
--  a Cassandra user that has both create-table and write permissions
+-  a Cassandra |cassandra_version| instance or a ScyllaDB |scylladb_version| instance, either standalone or cluster
+-  a Cassandra / ScyllaDB user that has both create-table and write permissions
    (not needed for standalone instances)
 
-Create A Cassandra Namespace
-----------------------------
+Create A Cassandra / ScyllaDB Namespace
+---------------------------------------
 
-You will need a namespace in Cassandra to contain the tutorial tables. The easiest way to do
+You will need a namespace in Cassandra / ScyllaDB to contain the tutorial tables. The easiest way to do
 this is with the ``cqlsh`` tool provided with Cassandra distributions. Start ``cqlsh``, then type:
 
 .. code-block:: bash
 
     cqlsh>  CREATE KEYSPACE geomesa WITH REPLICATION = {'class': 'SimpleStrategy', 'replication_factor' : 3};
 
 This creates a key space called "geomesa". This is a top-level name
-space within Cassandra and it will provide a place for GeoMesa to put
+space within Cassandra / ScyllaDB and it will provide a place for GeoMesa to put
 all of its data, including data for spatial features and associated
 metadata.
 
@@ -88,20 +88,20 @@ On the command line, run:
 
 where you provide the following arguments:
 
-- ``<host:port>`` the hostname and port your Cassandra instance is
-  running on. For Cassandra standalone this will be ``localhost:9042``. More
+- ``<host:port>`` the hostname and port your Cassandra / ScyllaDB instance is
+  running on. For Cassandra / ScyllaDB standalone this will be ``localhost:9042``. More
   information on how to find your connection is available
-  `here <https://www.geomesa.org/documentation/user/cassandra/install.html#connecting-to-cassandra>`__.
+  `here <https://www.geomesa.org/documentation/user/cassandra/install.html#connecting-to-cassandra-/-scylladb>`__.
 - ``<keyspace>`` keyspace your table will be put into. If you followed the instructions above,
   this will be ``geomesa``. More information on how to setup keyspaces is available
-  `here <https://www.geomesa.org/documentation/user/cassandra/install.html#connecting-to-cassandra>`__.
+  `here <https://www.geomesa.org/documentation/user/cassandra/install.html#connecting-to-cassandra-/-scylladb>`__.
 - ``<table>`` the name of the destination table that will
   accept these test records. This table should either not exist or
   should be empty
-- ``<user>`` (optional) the name of a Cassandra user that has
+- ``<user>`` (optional) the name of a Cassandra / ScyllaDB user that has
   permissions to create, read and write tables
 - ``<password>`` (optional) the password for the previously-mentioned
-  Cassandra user
+  Cassandra / ScyllaDB user
 
 Optionally, you can also specify that the quick start should delete its data upon completion. Use the
 ``--cleanup`` flag when you run to enable this behavior.
@@ -256,7 +256,7 @@ Register the GeoMesa Store with GeoServer
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Log into GeoServer using your user and password credentials. Click
-"Stores" and "Add new Store". Select the ``Cassandra (GeoMesa)`` vector data
+"Stores" and "Add new Store". Select the ``Cassandra / ScyllaDB (GeoMesa)`` vector data
 source, and fill in the required parameters.
 
 Basic store info:
@@ -269,7 +269,7 @@ Connection parameters:
 
 -  these are the same parameter values that you supplied on the
    command line when you ran the tutorial; they describe how to connect
-   to the Cassandra instance where your data reside
+   to the Cassandra / ScyllaDB instance where your data reside
 
 Click "Save", and GeoServer will search your Cassandra table for any
 GeoMesa-managed feature types.

docs/user/cassandra/commandline.rst

@@ -15,12 +15,12 @@ Once installed, the tools should be available through the command ``geomesa-cass
       Commands:
         ...
 
-All Cassandra commands are described in the common tools chapter :doc:`/user/cli/index`.
+All Cassandra / ScyllaDB commands are described in the common tools chapter :doc:`/user/cli/index`.
 
 General Arguments
 -----------------
 
-Most commands require you to specify the connection to Cassandra. This generally includes a contact point,
+Most commands require you to specify the connection to Cassandra / ScyllaDB. This generally includes a contact point,
 key space, username and password. Specify the contact point and key space with ``--contact-point`` and
 ``--key-space`` (or ``-P`` and ``-k``). Specify the username and password with ``--user`` and ``--password``
 (or ``-u`` and ``-p``). In order to avoid plaintext passwords in the bash history

docs/user/cassandra/configuration.rst

@@ -1,13 +1,13 @@
-Cassandra Configuration
-=======================
+Cassandra / ScyllaDB Configuration
+==================================
 
-This section details Cassandra-specific configuration properties. For general properties,
+This section details Cassandra / ScyllaDB specific configuration properties. For general properties,
 see :ref:`geomesa_site_xml`.
 
 Connection Properties
 ---------------------
 
-The following properties control the configuration of the Cassandra session.
+The following properties control the configuration of the Cassandra / ScyllaDB session.
 
 geomesa.cassandra.connection.timeout
 ++++++++++++++++++++++++++++++++++++

docs/user/cassandra/geoserver.rst

@@ -12,11 +12,11 @@ interface by clicking "Data > Stores" in the left-hand menu and then
 clicking "Add new Store".
 
 If you have properly installed the GeoMesa Cassandra GeoServer plugin as described
-in :ref:`install_cassandra_geoserver`, "Cassandra (GeoMesa)" should be included in the list
+in :ref:`install_cassandra_geoserver`, "Cassandra  / ScyllaDB (GeoMesa)" should be included in the list
 under **Vector Data Sources**. If you do not see this, check that you unpacked the
 plugin JARs into in the right directory and restart GeoServer.
 
-On the "Add Store" page, select "Cassandra (GeoMesa)", and fill out the
+On the "Add Store" page, select "Cassandra / ScyllaDB (GeoMesa)", and fill out the
 parameters. The parameters are described in :ref:`cassandra_parameters`.
 
-Click "Save", and GeoServer will search Cassandra for any GeoMesa-managed feature types.
+Click "Save", and GeoServer will search Cassandra / ScyllaDB for any GeoMesa-managed feature types.

docs/user/cassandra/heatmaps.rst

@@ -1,7 +1,7 @@
 Cassandra Heatmaps
 ==================
 
-Cassandra can generate client-side heatmaps in GeoServer by defining a style and using the built in ``gs:Heatmap``
+Cassandra / ScyllaDB can generate client-side heatmaps in GeoServer by defining a style and using the built in ``gs:Heatmap``
 process within GeoServer.
 
 To start, add a new SLD style to GeoServer named "heatmap" and use this sld

docs/user/cassandra/index.rst

@@ -1,17 +1,25 @@
-Cassandra Data Store
+Cassandra / ScyllaDB Data Store
 ====================
 
 .. note::
 
     GeoMesa currently supports Cassandra version |cassandra_version|.
 
+.. note::
+
+    GeoMesa currently supports ScyllaDB version |scylladb_version|.
+
 The GeoMesa Cassandra Data Store is an implementation of the GeoTools
-``DataStore`` interface that is backed by `Apache Cassandra`_.
+``DataStore`` interface that is backed by `Apache Cassandra`_ or `ScyllaDB`.
 It is found in the ``geomesa-cassandra`` directory of the GeoMesa
-source distribution.
+source distribution. As `ScyllaDB` is API-compatible with `Apache Cassandra`_,
+it is also supported and work with the same configuration
+just by pointing to `ScyllaDB`_ in connection string.
 
 .. _Apache Cassandra: https://cassandra.apache.org/
 
+.. _ScyllaDB: https://www.scylladb.com/
+
 .. toctree::
     :maxdepth: 1
 

docs/user/cassandra/install.rst

@@ -5,6 +5,10 @@ Installing GeoMesa Cassandra
 
     GeoMesa currently supports Cassandra version |cassandra_version|.
 
+.. note::
+
+    GeoMesa currently supports ScyllaDB version |scylladb_version|.
+
 .. note::
 
     The examples below expect a version to be set in the environment:
@@ -14,23 +18,25 @@ Installing GeoMesa Cassandra
         $ export TAG="|release_version|"
         $ export VERSION="|scala_binary_version|-${TAG}" # note: |scala_binary_version| is the Scala build version
 
-Connecting to Cassandra
------------------------
+Connecting to Cassandra or ScyllaDB
+-----------------------------------
 
-The first step to getting started with Cassandra and GeoMesa is to install
-Cassandra itself. You can find good directions for downloading and installing
-Cassandra online. For example, see Cassandra's official `getting started`_ documentation.
+The first step to getting started with Cassandra / ScyllaDB and GeoMesa is to install
+Cassandra / ScyllaDB itself. You can find good directions for downloading and installing
+Cassandra / ScyllaDB online. For example, see Cassandra's official `getting started`_ or official `ScyllaDB's getting started`_  documentation.
 
 .. _getting started: https://cassandra.apache.org/doc/latest/getting_started/index.html
 
-Once you have Cassandra installed, the next step is to prepare your Cassandra installation
-to integrate with GeoMesa. First, create a key space within Cassandra. The easiest way to
-do this with ``cqlsh``, which should have been installed as part of your Cassandra installation.
+.. _ScyllaDB's getting started: https://opensource.docs.scylladb.com/stable/getting-started/index.html
+
+Once you have Cassandra / ScyllaDB installed, the next step is to prepare your Cassandra / ScyllaDB installation
+to integrate with GeoMesa. First, create a key space within Cassandra / ScyllaDB. The easiest way to
+do this with ``cqlsh``, which should have been installed as part of your Cassandra / ScyllaDB installation.
 Start ``cqlsh``, then type::
 
     CREATE KEYSPACE mykeyspace WITH REPLICATION = {'class': 'SimpleStrategy', 'replication_factor' : 3};
 
-This creates a key space called "mykeyspace". This is a top-level name space within Cassandra
+This creates a key space called "mykeyspace". This is a top-level name space within Cassandra / ScyllaDB
 and it will provide a place for GeoMesa to put all of its data, including data for spatial features
 and associated metadata.
 
@@ -40,12 +46,12 @@ installation. To set the variable add the following line to your ``.profile`` or
 
     export CASSANDRA_HOME=/path/to/cassandra
 
-Finally, make sure you know a contact point for your Cassandra instance.
-If you are just trying things locally, and using the default Cassandra settings,
+Finally, make sure you know a contact point for your Cassandra / ScyllaDB instance.
+If you are just trying things locally, and using the default Cassandra / ScyllaDB settings,
 the contact point would be ``127.0.0.1:9042``. You can check and configure the
-port you are using using the ``native_transport_port`` in the Cassandra
+port you are using using the ``native_transport_port`` in the Cassandra / ScyllaDB
 configuration file (located at ``conf/cassandra.yaml`` in your Cassandra
-installation directory).
+installation directory, ``/etc/scylla/scylla.yaml`` for ScyllaDB accordingly).
 
 Installing from the Binary Distribution
 ---------------------------------------

docs/user/cassandra/usage.rst

@@ -3,17 +3,17 @@
 Cassandra Data Store Parameters
 ===============================
 
-Use the following parameters for a Cassandra data store (required parameters are marked with ``*``):
+Use the following parameters for a Cassandra / ScyllaDB data store (required parameters are marked with ``*``):
 
 ==================================== ======= ========================================================================================
 Parameter                            Type    Description
 ==================================== ======= ========================================================================================
 ``cassandra.catalog *``              String  The name of the GeoMesa catalog table (previously ``geomesa.cassandra.catalog.table``)
 ``cassandra.contact.point *``        String  The connection point for Cassandra, in the form ``<host>:<port>`` - for a default
                                              local installation this will be ``localhost:9042``
-``cassandra.keyspace *``             String  The Cassandra keyspace to use (must exist already)
-``cassandra.username``               String  Cassandra user
-``cassandra.password``               String  Cassandra password
+``cassandra.keyspace *``             String  The Cassandra / ScyllaDB keyspace to use (must exist already)
+``cassandra.username``               String  Cassandra / ScyllaDB user
+``cassandra.password``               String  Cassandra / ScyllaDB password
 ``geomesa.query.audit``              Boolean Audit queries being run. Queries will be written to a log file
 ``geomesa.query.timeout``            String  The max time a query will be allowed to run before being killed. The
                                              timeout is specified as a duration, e.g. ``1 minute`` or ``60 seconds``
@@ -25,7 +25,7 @@ Parameter                            Type    Description
 Programmatic Access
 -------------------
 
-An instance of a Cassandra data store can be obtained through the normal GeoTools discovery methods,
+An instance of a Cassandra / ScyllaDB data store can be obtained through the normal GeoTools discovery methods,
 assuming that the GeoMesa code is on the classpath.
 
 .. code-block:: java

geomesa-cassandra/geomesa-cassandra-datastore/pom.xml

@@ -9,7 +9,7 @@
     <modelVersion>4.0.0</modelVersion>
 
     <artifactId>geomesa-cassandra-datastore_2.12</artifactId>
-    <name>GeoMesa Cassandra DataStore</name>
+    <name>GeoMesa Cassandra / ScyllaDB DataStore</name>
 
     <dependencies>
         <dependency>

geomesa-cassandra/geomesa-cassandra-datastore/src/main/scala/org/locationtech/geomesa/cassandra/data/CassandraDataStoreFactory.scala

@@ -130,8 +130,8 @@ object CassandraDataStoreFactory extends GeoMesaDataStoreInfo {
       null,
       Map(Parameter.DEPRECATED -> true, Parameter.IS_PASSWORD -> true).asJava)
 
-  override val DisplayName = "Cassandra (GeoMesa)"
-  override val Description = "Apache Cassandra\u2122 distributed key/value store"
+  override val DisplayName = "Cassandra / ScyllaDB (GeoMesa)"
+  override val Description = "Apache Cassandra / ScyllaDB \u2122 distributed key/value store"
 
   override val ParameterInfo: Array[GeoMesaParam[_ <: AnyRef]] =
     Array(

geomesa-cassandra/geomesa-cassandra-gs-plugin/pom.xml

@@ -10,7 +10,7 @@
     </parent>
 
     <artifactId>geomesa-cassandra-gs-plugin_2.12</artifactId>
-    <name>GeoMesa Cassandra GeoServer Plugin</name>
+    <name>GeoMesa Cassandra / ScyllaDB GeoServer Plugin</name>
     <packaging>pom</packaging>
 
     <dependencies>

geomesa-cassandra/pom.xml

@@ -8,7 +8,7 @@
     <modelVersion>4.0.0</modelVersion>
 
     <artifactId>geomesa-cassandra_2.12</artifactId>
-    <name>GeoMesa Cassandra</name>
+    <name>GeoMesa Cassandra / ScyllaDB</name>
     <packaging>pom</packaging>
 
     <properties>