EECS373_IR_Learning_Remote

Creating an IR Learning Remote for our EECS 373 Final Project.

Organization

Trunk:

Trunk houses the current stable build for the STM32 dev board. This can easily be flashed to the board using the STM32CubeIDE and will initialize the controller with a default set of devices and commands which are ready to be programmed!

Command Line Interface:

The CLI is housed under dev/interface. Clone it to interact with the remote! (Note: Currently this is only compatible with Linux and uses /dev/ttyUSB0 by default. The port is changeable at the top of serial_interface.c, visit dev/interface for more information)

Usage:

To edit the remote's current settings:

edit   [option]    [suboption(s)]
       device      device number
       command     device number     command number