Remove unneeded template. (#687) #1609
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: snmalloc CI | |
| # Controls when the workflow will run | |
| on: | |
| # Triggers the workflow on push or pull request events but only for the master branch | |
| push: | |
| branches: [ main ] | |
| pull_request: | |
| branches: [ main, snmalloc1 ] | |
| # Allows you to run this workflow manually from the Actions tab | |
| workflow_dispatch: | |
| jobs: | |
| ubuntu: | |
| strategy: | |
| matrix: | |
| # Build each combination of OS and release/debug variants | |
| os: [ "ubuntu-latest", "ubuntu-20.04" ] | |
| build-type: [ "Release", "Debug" ] | |
| # Extra cmake flags. GitHub Actions matrix overloads `include` to mean | |
| # 'add extra things to a job' and 'add jobs'. You can add extra things | |
| # to a job by specifying things that exist in a job created from the | |
| # matrix definition and adding things. You can specify extra jobs by | |
| # specifying properties that don't match existing jobs. We use | |
| # `cmake-flags` to add cmake flags to all jobs matching a pattern and | |
| # `extra-cmake-flags` to specify a new job with custom CMake flags. | |
| # | |
| # Note that adding new jobs does not *refine* existing matrix entries, | |
| # but rather adds new tuples wholesale. That is, specifying "os" alone | |
| # will result in a tuple without set "build-type" rather than one for | |
| # each existing "build-type" value! | |
| extra-cmake-flags: [ "" ] | |
| # Modify the complete matrix | |
| include: | |
| - os: "ubuntu-20.04" | |
| variant: "C++17" | |
| build-type: "Debug" | |
| extra-cmake-flags: "-DSNMALLOC_USE_CXX17=ON" | |
| # Add the self-host build, using the bounds-checked memcpy in | |
| # maximally paranoid mode (checking loads and stores) | |
| - os: "ubuntu-latest" | |
| build-type: Debug | |
| self-host: true | |
| extra-cmake-flags: "-DSNMALLOC_MEMCPY_BOUNDS=ON -DSNMALLOC_CHECK_LOADS=ON" | |
| # Extra build to check using pthread library for destructing local state. | |
| - os: "ubuntu-latest" | |
| variant: "with pthread destructors" | |
| build-type: Debug | |
| self-host: true | |
| extra-cmake-flags: "-DSNMALLOC_USE_PTHREAD_DESTRUCTORS=On" | |
| # Extra build to check using individual mitigations works. | |
| - os: "ubuntu-latest" | |
| variant: "individual mitigations" | |
| build-type: Release | |
| self-host: true | |
| extra-cmake-flags: "-DSNMALLOC_BENCHMARK_INDIVIDUAL_MITIGATIONS=On -DSNMALLOC_BUILD_TESTING=Off" | |
| # Check that we can build specifically with libstdc++ | |
| - os: "ubuntu-latest" | |
| variant: "libstdc++ (Build only)" | |
| build-type: Release | |
| extra-cmake-flags: "-DCMAKE_CXX_COMPILER=clang++ -DCMAKE_CXX_FLAGS=-stdlib=libstdc++" | |
| build-only: yes | |
| # Replay some of the above tests with clang-10 specifically | |
| - os: "ubuntu-20.04" | |
| variant: "clang-10 (with pthread destructors)." | |
| build-type: Debug | |
| self-host: true | |
| extra-cmake-flags: "-DSNMALLOC_USE_PTHREAD_DESTRUCTORS=On -DCMAKE_CXX_COMPILER=clang++-10 -DCMAKE_C_COMPILER=clang-10" | |
| - os: "ubuntu-20.04" | |
| variant: "clang-10 libstdc++ (Build only)" | |
| build-type: Release | |
| extra-cmake-flags: "-DCMAKE_CXX_COMPILER=clang++-10 -DCMAKE_C_COMPILER=clang-10 -DCMAKE_CXX_FLAGS=-stdlib=libstdc++" | |
| build-only: yes | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| runs-on: ${{ matrix.os }} | |
| name: ${{ matrix.os }} ${{ matrix.build-type }} ${{ matrix.variant }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install build dependencies | |
| run: "sudo apt install ninja-build" | |
| - uses: mjp41/workaround8649@c8550b715ccdc17f89c8d5c28d7a48eeff9c94a8 | |
| with: | |
| os: ${{ matrix.os }} | |
| - name: Configure CMake | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja ${{ matrix.cmake-flags }} ${{ matrix.extra-cmake-flags }} | |
| # Build with a nice ninja status line | |
| - name: Build | |
| working-directory: ${{github.workspace}}/build | |
| run: NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| - name: Test file size of binaries is sane | |
| working-directory: ${{github.workspace}}/build | |
| run: "ls -l libsnmallocshim.* ; [ $(ls -l libsnmallocshim.* | awk '{ print $5}') -lt 10000000 ]" | |
| # If the tests are enabled for this job, run them | |
| - name: Test | |
| if: ${{ matrix.build-only != 'yes' }} | |
| working-directory: ${{github.workspace}}/build | |
| run: ctest --output-on-failure -j 4 -C ${{ matrix.build-type }} --timeout 400 | |
| - name: Selfhost | |
| if: ${{ matrix.self-host }} | |
| working-directory: ${{github.workspace}}/build | |
| run: | | |
| mkdir libs | |
| cp libsnmallocshim*.so libs | |
| for lib in `ls libs`; do echo; echo Testing $lib; ninja clean; LD_PRELOAD=libs/$lib ninja libsnmallocshim.so; done | |
| # If this looks remarkably familiar, that's because it is. Sigh. | |
| macos: | |
| strategy: | |
| matrix: | |
| os: [ "macos-12", "macos-14" ] | |
| build-type: [ "Release", "Debug" ] | |
| extra-cmake-flags: [ "", "-DSNMALLOC_USE_CXX17=ON" ] | |
| fail-fast: false | |
| runs-on: ${{ matrix.os }} | |
| name: ${{ matrix.os }} ${{ matrix.build-type }} ${{ matrix.extra-cmake-flags }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install build dependencies | |
| # The homebrew packages are broken at the moment and error out | |
| # after trying to install Python as a dependency of ninja because | |
| # 2to3 exists. As a quick hack, delete it first. This should be | |
| # removed once the homebrew install is fixed. | |
| run: "rm -f /usr/local/bin/2to3 ; brew update && brew install ninja" | |
| - name: Configure CMake | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja ${{ matrix.cmake-flags }} ${{ matrix.extra-cmake-flags }} | |
| # Build with a nice ninja status line | |
| - name: Build | |
| working-directory: ${{github.workspace}}/build | |
| run: NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| - name: Test file size of binaries is sane | |
| working-directory: ${{github.workspace}}/build | |
| run: "ls -l libsnmallocshim.* ; [ $(ls -l libsnmallocshim.* | awk '{ print $5}') -lt 10000000 ]" | |
| # If the tests are enabled for this job, run them | |
| - name: Test | |
| if: ${{ matrix.build-only != 'yes' }} | |
| working-directory: ${{github.workspace}}/build | |
| run: ctest --output-on-failure -j 4 -C ${{ matrix.build-type }} --timeout 400 | |
| - name: Selfhost | |
| if: ${{ matrix.self-host }} | |
| working-directory: ${{github.workspace}}/build | |
| run: | | |
| mkdir libs | |
| cp libsnmallocshim*.so libs | |
| for lib in `ls libs`; do echo; echo Testing $lib; ninja clean; LD_PRELOAD=libs/$lib ninja libsnmallocshim.so; done | |
| # GitHub doesn't natively support *BSD, but we can run them in VMs on Mac / | |
| # Linux runners | |
| freebsd: | |
| strategy: | |
| matrix: | |
| # Build each combination of OS, version, and release/debug variants | |
| # FreeBSD and OpenBSD run on xhyve, netbsd needs qemu | |
| os: | |
| - version: '13.2' | |
| dependencies: pkg ins -y cmake ninja | |
| build-type: [ Release, Debug ] | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| # Kill these jobs if they take too long. | |
| timeout-minutes: 25 | |
| runs-on: ubuntu-22.04 | |
| name: FreeBSD-${{ matrix.os.version}} ${{ matrix.build-type }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - uses: vmactions/freebsd-vm@v1 | |
| with: | |
| release: ${{ matrix.os.version}} | |
| usesh: true | |
| mem: 8192 | |
| copyback: false | |
| prepare: | | |
| ${{ matrix.os.dependencies }} | |
| run: | | |
| set -e | |
| cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja | |
| cd ${{github.workspace}}/build | |
| NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| ctest -j 4 --output-on-failure -E '(perf-.*)|(.*-malloc$)' --timeout 400 | |
| netbsd: | |
| strategy: | |
| matrix: | |
| os: | |
| - version: '9.2' | |
| dependencies: | | |
| /usr/sbin/pkg_add cmake ninja-build gcc10 | |
| build-type: [ Release ] | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| # Kill these jobs if they take too long. | |
| timeout-minutes: 25 | |
| runs-on: ubuntu-22.04 | |
| name: NetBSD-${{ matrix.os.version}} ${{ matrix.build-type }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - uses: vmactions/netbsd-vm@v1 | |
| with: | |
| release: ${{ matrix.os.version}} | |
| usesh: true | |
| mem: 8192 | |
| copyback: false | |
| prepare: | | |
| ${{ matrix.os.dependencies }} | |
| run: | | |
| set -e | |
| cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja -DCMAKE_CXX_COMPILER=/usr/pkg/gcc10/bin/g++ -DCMAKE_C_COMPILER=/usr/pkg/gcc10/bin/gcc | |
| cd ${{github.workspace}}/build | |
| NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| ctest -j 4 --output-on-failure -E '(perf-.*)|(.*-malloc$)' --timeout 400 | |
| ## Without overcommit, or explicit commit the current implementation cannot be made to work on openbsd. | |
| ## We could add a layered pagemap for openbsd, that would address the requirements. | |
| # openbsd: | |
| # strategy: | |
| # matrix: | |
| # # Build each combination of OS, version, and release/debug variants | |
| # os: | |
| # - version: '7.2' | |
| # dependencies: pkg_add -I cmake ninja | |
| # build-type: [ Release, Debug ] | |
| # # Don't abort runners if a single one fails | |
| # fail-fast: false | |
| # # Kill these jobs if they take too long. | |
| # timeout-minutes: 25 | |
| # runs-on: macos-latest | |
| # name: OpenBSD-${{ matrix.os.version}} ${{ matrix.build-type }} | |
| # steps: | |
| # - uses: actions/checkout@v3 | |
| # - uses: vmactions/openbsd-vm@v0 | |
| # with: | |
| # release: ${{ matrix.os.version}} | |
| # usesh: true | |
| # mem: 8192 | |
| # copyback: false | |
| # prepare: | | |
| # ${{ matrix.os.dependencies }} | |
| # run: | | |
| # set -e | |
| # cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja | |
| # cd ${{github.workspace}}/build | |
| # NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| # ctest -j 4 --output-on-failure -E '(perf-.*)|(.*-malloc$)' --timeout 400 | |
| sanitizer: | |
| strategy: | |
| matrix: | |
| # Build just release variant as Debug is too slow. | |
| build-type: [ Release ] | |
| os: ["ubuntu-latest", "ubuntu-20.04"] | |
| include: | |
| - os: "ubuntu-latest" | |
| variant: "libc++ (TSan + UBSan)" | |
| dependencies: "sudo apt install ninja-build" | |
| extra-cmake-flags: "-DCMAKE_CXX_COMPILER=clang++ -DCMAKE_CXX_FLAGS=-stdlib=\"libc++ -g\" -DSNMALLOC_SANITIZER=undefined,thread" | |
| # Also test specifically with clang-10 (on ubuntu-20.04) | |
| - os: "ubuntu-20.04" | |
| variant: "clang-10 libc++ (TSan + UBSan)" | |
| dependencies: "sudo apt install ninja-build" | |
| extra-cmake-flags: "-DCMAKE_CXX_COMPILER=clang++-10 -DCMAKE_CXX_FLAGS=-stdlib=\"libc++ -g\" -DSNMALLOC_SANITIZER=undefined,thread" | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| runs-on: ${{ matrix.os }} | |
| name: ${{ matrix.os }} ${{ matrix.build-type }} ${{ matrix.variant }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install build dependencies | |
| run: ${{ matrix.dependencies }} | |
| - uses: mjp41/workaround8649@c8550b715ccdc17f89c8d5c28d7a48eeff9c94a8 | |
| with: | |
| os: ${{ matrix.os }} | |
| - name: Configure CMake | |
| run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{matrix.build-type}} -G Ninja ${{ matrix.cmake-flags }} ${{ matrix.extra-cmake-flags }} | |
| # Build with a nice ninja status line | |
| - name: Build | |
| working-directory: ${{github.workspace}}/build | |
| run: NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| run: ctest --output-on-failure -j 4 -C ${{ matrix.build-type }} --timeout 400 -E "memcpy|external_pointer" --repeat-until-fail 2 | |
| qemu-crossbuild: | |
| strategy: | |
| matrix: | |
| build-type: [ Release, Debug ] | |
| arch: | |
| - name: armhf | |
| system-processor: arm | |
| triple: arm-linux-gnueabihf | |
| rtld: ld-linux-armhf.so.3 | |
| ld-flavour: lld | |
| host-os: ubuntu-latest | |
| - name: arm64 | |
| system-processor: aarch64 | |
| triple: aarch64-linux-gnu | |
| rtld: ld-linux-aarch64.so.1 | |
| ld-flavour: lld | |
| host-os: ubuntu-latest | |
| - name: ppc64el | |
| system-processor: powerpc64le | |
| triple: powerpc64le-linux-gnu | |
| rtld: ld64.so.2 | |
| ld-flavour: lld | |
| # See https://github.com/microsoft/snmalloc/issues/576 | |
| host-os: ubuntu-20.04 | |
| - name: riscv64 | |
| system-processor: riscv64 | |
| triple: riscv64-linux-gnu | |
| rtld: ld-linux-riscv64-lp64d.so.1 | |
| extra-packages: binutils-riscv64-linux-gnu | |
| ld-flavour: bfd | |
| ld: /usr/bin/riscv64-linux-gnu-ld.bfd | |
| host-os: ubuntu-latest | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| runs-on: ${{matrix.arch.host-os}} | |
| name: ${{matrix.build-type}} cross-build for ${{ matrix.arch.triple }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: "Install cross-compile toolchain and QEMU (ubuntu-20.04)" | |
| # Install the dependencies and clang 13. Earlier versions of clang don't | |
| # find the multilib things for this week's Ubuntu filesystem layout. | |
| if: matrix.arch.host-os == 'ubuntu-20.04' | |
| run: | | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add - | |
| sudo add-apt-repository "deb http://apt.llvm.org/focal/ llvm-toolchain-focal-13 main" | |
| sudo apt update | |
| sudo apt install libstdc++-9-dev-${{ matrix.arch.name }}-cross qemu-user ninja-build clang-13 lld-13 | |
| sudo apt install ${{matrix.arch.extra-packages}} | |
| - name: "Install cross-compile toolchain and QEMU (ubuntu-latest)" | |
| if: matrix.arch.host-os == 'ubuntu-latest' | |
| run: | | |
| sudo apt update | |
| sudo apt install libstdc++-12-dev-${{ matrix.arch.name }}-cross qemu-user ninja-build | |
| sudo apt install ${{matrix.arch.extra-packages}} | |
| - name: Reconfigure for PowerPC64LE | |
| if: startsWith(matrix.arch.triple, 'powerpc64le') | |
| # The default PowerPC qemu configuration uses the wrong page size. | |
| # Wrap it in a script that fixes this. | |
| run: | | |
| sudo update-binfmts --disable qemu-ppc64le | |
| sudo sh -c 'echo ":qemu-ppc64le:M:0:\x7f\x45\x4c\x46\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x15\x00:\xff\xff\xff\xff\xff\xff\xff\xfc\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\x00:`pwd`/ppc64.sh:" > /proc/sys/fs/binfmt_misc/register' | |
| echo '#!/bin/sh' > ppc64.sh | |
| echo '/usr/bin/qemu-ppc64le -p 65536 $@' >> ppc64.sh | |
| chmod +x ppc64.sh | |
| - name: Configure | |
| env: | |
| SNMALLOC_CI_CLANG_VERSION: ${{ (matrix.arch.host-os == 'ubuntu-latest') && 14 || 13 }} | |
| RTLD_NAME: ${{ matrix.arch.rtld }} | |
| ARCH: ${{ matrix.arch.system-processor }} | |
| TRIPLE: ${{ matrix.arch.triple}} | |
| run: > | |
| cmake | |
| -B ${{github.workspace}}/build | |
| -DCMAKE_BUILD_TYPE=${{matrix.build-type}} | |
| -G Ninja | |
| -DSNMALLOC_CI_BUILD=ON | |
| -DSNMALLOC_QEMU_WORKAROUND=ON | |
| -DSNMALLOC_STATIC_LIBRARY=OFF | |
| -DCMAKE_TOOLCHAIN_FILE=ci/Toolchain.cmake | |
| -DSNMALLOC_LINKER=${{matrix.arch.ld}} | |
| -DSNMALLOC_LINKER_FLAVOUR=${{matrix.arch.ld-flavour}} | |
| - name: Build | |
| working-directory: ${{github.workspace}}/build | |
| run: NINJA_STATUS="%p [%f:%s/%t] %o/s, %es" ninja | |
| # For debugging: verify that we've actually cross-compiled. | |
| - name: Run `file` for inspection | |
| working-directory: ${{github.workspace}}/build | |
| run: file func* | |
| # Run the tests, skipping the -malloc and perf- tests (perf doesn't make | |
| # sense in an emulator and the pass-through malloc is slightly flaky in | |
| # QEMU) | |
| - name: Test | |
| working-directory: ${{github.workspace}}/build | |
| run: ctest -j 2 --output-on-failure -E '(perf-.*)|(.*-malloc$)' --timeout 400 | |
| timeout-minutes: 30 | |
| windows: | |
| strategy: | |
| matrix: | |
| # Build each combination of OS and release/debug variants | |
| os: [ windows-2019 ] | |
| build-type: [ Release, Debug ] | |
| arch: [ Win32, x64 ] | |
| toolchain: [ "", "-T ClangCL" ] | |
| extra-cmake-flags: [ "" ] | |
| # Add an extra check for the Windows 8 compatible PAL | |
| include: | |
| - os: windows-2019 | |
| build-type: Release | |
| arch: x64 | |
| toolchain: "" | |
| extra-cmake-flags: -DWIN8COMPAT=TRUE | |
| variant: Windows 8 compatible | |
| - os: windows-2022 | |
| build-type: Release | |
| arch: Win32 | |
| toolchain: "" | |
| - os: windows-2022 | |
| build-type: Debug | |
| arch: Win32 | |
| toolchain: "" | |
| - os: windows-2022 | |
| build-type: Release | |
| arch: x64 | |
| toolchain: "" | |
| - os: windows-2022 | |
| build-type: Debug | |
| arch: x64 | |
| toolchain: "" | |
| - os: windows-2022 | |
| build-type: Release | |
| arch: ARM64 | |
| toolchain: "" | |
| build-only: yes | |
| - os: windows-2022 | |
| build-type: Debug | |
| arch: ARM64 | |
| toolchain: "" | |
| build-only: yes | |
| - os: windows-2022 | |
| build-type: Release | |
| arch: ARM64EC | |
| toolchain: "" | |
| extra-cmake-flags: -DCMAKE_SYSTEM_VERSION="10.0.22621.0" | |
| build-only: yes | |
| - os: windows-2022 | |
| build-type: Debug | |
| arch: ARM64EC | |
| toolchain: "" | |
| extra-cmake-flags: -DCMAKE_SYSTEM_VERSION="10.0.22621.0" | |
| build-only: yes | |
| # Don't abort runners if a single one fails | |
| fail-fast: false | |
| runs-on: ${{ matrix.os }} | |
| name: ${{ matrix.os }} ${{ matrix.arch }} ${{ matrix.build-type }} ${{ matrix.toolchain }} ${{ matrix.variant }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Configure CMake | |
| run: | | |
| cmake -B ${{github.workspace}}/build -A ${{ matrix.arch }} ${{ matrix.toolchain }} ${{ matrix.extra-cmake-flags }} -DSNMALLOC_CI_BUILD=On -DSNMALLOC_RUST_SUPPORT=On | |
| # Build with whatever version of msbuild was configured, for a single build configuration. | |
| - name: Build | |
| run: cmake --build ${{github.workspace}}/build -- /m /p:Configuration=${{ matrix.build-type }} | |
| # Run the tests. | |
| - name: Test | |
| if: ${{ matrix.build-only != 'yes' }} | |
| working-directory: ${{ github.workspace }}/build | |
| run: ctest -j 2 --interactive-debug-mode 0 --output-on-failure -C ${{ matrix.build-type }} --timeout 400 | |
| timeout-minutes: 20 | |
| # Job to run clang-format and report errors | |
| format: | |
| runs-on: ubuntu-22.04 | |
| # We don't need to do the build for this job, but we need to configure it to get the clang-format target | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install clang-tidy and clang-format | |
| run: | | |
| sudo apt update | |
| sudo apt install clang-tidy-15 clang-format-15 | |
| - name: Configure CMake | |
| run: cmake -B ${{github.workspace}}/build -DSNMALLOC_USE_CXX17=ON | |
| # Run the clang-format check and error if it generates a diff | |
| - name: Run clang-format | |
| working-directory: ${{github.workspace}}/build | |
| run: | | |
| set -eo pipefail | |
| make clangformat | |
| git diff --exit-code | |
| - name: Run clang-tidy | |
| run: | | |
| clang-tidy-15 src/snmalloc/override/malloc.cc -header-filter="`pwd`/*" -warnings-as-errors='*' -export-fixes=tidy.fail -- -std=c++17 -mcx16 -DSNMALLOC_PLATFORM_HAS_GETENTROPY=0 -Isrc | |
| if [ -f tidy.fail ] ; then | |
| cat tidy.fail | |
| exit 1 | |
| fi | |
| all-checks: | |
| # Currently FreeBSD and NetBSD CI are not working, so we do not require them to pass. | |
| needs: [ubuntu, macos, freebsd, netbsd, sanitizer, qemu-crossbuild, windows, format] | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Dummy step | |
| run: true |