-
Notifications
You must be signed in to change notification settings - Fork 4
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
MLAB-project/Modules#12 Created slicer config for Prusa MINI printer.
- Loading branch information
Showing
1 changed file
with
216 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,216 @@ | ||
| # generated by Slic3r 1.3.1-dev on 2019-12-10 13:21:36 | ||
| adaptive_slicing = 0 | ||
| adaptive_slicing_quality = 75% | ||
| avoid_crossing_perimeters = 0 | ||
| bed_shape = 0x0,180x0,180x180,0x180 | ||
| bed_temperature = 60 | ||
| before_layer_gcode = | ||
| between_objects_gcode = | ||
| bottom_infill_pattern = rectilinear | ||
| bottom_solid_layers = 6 | ||
| bridge_acceleration = 1000 | ||
| bridge_angle = 0 | ||
| bridge_fan_speed = 100 | ||
| bridge_flow_ratio = 0.95 | ||
| bridge_speed = 30 | ||
| brim_width = 0 | ||
| compatible_printers = | ||
| complete_objects = 0 | ||
| cooling = 1 | ||
| cooling_tube_length = 5 | ||
| cooling_tube_retraction = 91.5 | ||
| default_acceleration = 1250 | ||
| deretract_speed = 40 | ||
| disable_fan_first_layers = 1 | ||
| dont_support_bridges = 1 | ||
| duplicate_distance = 6 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\n;End of Gcode | ||
| external_perimeter_extrusion_width = 0.45 | ||
| external_perimeter_speed = 30 | ||
| external_perimeters_first = 0 | ||
| extra_loading_move = -2 | ||
| extra_perimeters = 1 | ||
| extruder_clearance_height = 25 | ||
| extruder_clearance_radius = 45 | ||
| extruder_offset = 0x0 | ||
| extrusion_axis = E | ||
| extrusion_multiplier = 1 | ||
| extrusion_width = 0.45 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 100 | ||
| filament_colour = #FFFFFF | ||
| filament_cost = 25.4 | ||
| filament_density = 1.24 | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 15 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.9 5 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_soluble = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = PLA | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| fill_angle = 45 | ||
| fill_density = 100% | ||
| fill_gaps = 1 | ||
| fill_pattern = rectilinear | ||
| first_layer_acceleration = 800 | ||
| first_layer_bed_temperature = 60 | ||
| first_layer_extrusion_width = 110% | ||
| first_layer_height = 0.3 | ||
| first_layer_speed = 20 | ||
| first_layer_temperature = 215 | ||
| gap_fill_speed = 40 | ||
| gcode_arcs = 0 | ||
| gcode_comments = 0 | ||
| gcode_flavor = reprap | ||
| host_type = octoprint | ||
| infill_acceleration = 1000 | ||
| infill_every_layers = 1 | ||
| infill_extruder = 1 | ||
| infill_extrusion_width = 0.45 | ||
| infill_first = 0 | ||
| infill_only_where_needed = 1 | ||
| infill_overlap = 55% | ||
| infill_speed = 80 | ||
| interface_shells = 0 | ||
| label_printed_objects = 0 | ||
| layer_height = 0.2 | ||
| match_horizontal_surfaces = 0 | ||
| machine_max_acceleration_e = 5000 | ||
| machine_max_acceleration_extruding = 1250 | ||
| machine_max_acceleration_retracting = 1250 | ||
| machine_max_acceleration_x = 1250 | ||
| machine_max_acceleration_y = 1250 | ||
| machine_max_acceleration_z = 400 | ||
| machine_max_feedrate_e = 80 | ||
| machine_max_feedrate_x = 180 | ||
| machine_max_feedrate_y = 180 | ||
| machine_max_feedrate_z = 12 | ||
| machine_max_jerk_e = 10 | ||
| machine_max_jerk_x = 8 | ||
| machine_max_jerk_y = 8 | ||
| machine_max_jerk_z = 2 | ||
| machine_min_extruding_rate = 0 | ||
| machine_min_travel_rate = 0 | ||
| max_fan_speed = 100 | ||
| max_layer_height = 0.3 | ||
| max_print_speed = 150 | ||
| max_volumetric_speed = 0 | ||
| min_fan_speed = 100 | ||
| min_layer_height = 0.07 | ||
| min_print_speed = 15 | ||
| min_shell_thickness = 0.8 | ||
| min_skirt_length = 4 | ||
| min_top_bottom_shell_thickness = 1.2 | ||
| nozzle_diameter = 0.4 | ||
| only_retract_when_crossing_perimeters = 0 | ||
| ooze_prevention = 0 | ||
| output_filename_format = [input_filename_base].gcode | ||
| overhangs = 1 | ||
| parking_pos_retraction = 92 | ||
| perimeter_acceleration = 800 | ||
| perimeter_extruder = 1 | ||
| perimeter_extrusion_width = 0.45 | ||
| perimeter_speed = 40 | ||
| perimeters = 1 | ||
| post_process = | ||
| pressure_advance = 0 | ||
| print_host = | ||
| print_settings_id = | ||
| printer_model = MINI | ||
| printer_notes = | ||
| printer_settings_id = | ||
| printer_technology = FFF | ||
| printer_variant = 0.4 | ||
| raft_layers = 0 | ||
| regions_overlap = 0 | ||
| remaining_times = 1 | ||
| resolution = 0 | ||
| retract_before_travel = 1.5 | ||
| retract_before_wipe = 70% | ||
| retract_layer_change = 0 | ||
| retract_length = 3.2 | ||
| retract_length_toolchange = 4 | ||
| retract_lift = 0.2 | ||
| retract_lift_above = 0 | ||
| retract_lift_below = 179 | ||
| retract_restart_extra = 0 | ||
| retract_restart_extra_toolchange = 0 | ||
| retract_speed = 70 | ||
| seam_position = nearest | ||
| sequential_print_priority = 0 | ||
| serial_port = | ||
| serial_speed = 250000 | ||
| shortcuts = support_material | ||
| skirt_distance = 2 | ||
| skirt_height = 3 | ||
| skirts = 1 | ||
| slice_closing_radius = 0.049 | ||
| slowdown_below_layer_time = 20 | ||
| small_perimeter_speed = 25 | ||
| solid_infill_below_area = 5 | ||
| solid_infill_every_layers = 0 | ||
| solid_infill_extruder = 1 | ||
| solid_infill_extrusion_width = 0.45 | ||
| solid_infill_speed = 80 | ||
| spiral_vase = 0 | ||
| standby_temperature_delta = -5 | ||
| start_filament_gcode = "; Filament gcode\n" | ||
| start_gcode = ;D3D:START:START\nT0\nM104 S215 T0\n\nG21\nG90\nM107\nT0\nG28\nG29\nM109 T0 S215 T0\nG0 F3000\nM107\nT0\nG92 E0\nG0 X0 Y149 Z0.1 F3600\nG1 Y49 E6.5 F1200\nG0 Z1\nG92 E0 | ||
| support_material = 0 | ||
| support_material_angle = 0 | ||
| support_material_auto = 1 | ||
| support_material_buildplate_only = 0 | ||
| support_material_contact_distance = 0.1 | ||
| support_material_enforce_layers = 0 | ||
| support_material_extruder = 1 | ||
| support_material_extrusion_width = 0.35 | ||
| support_material_interface_contact_loops = 0 | ||
| support_material_interface_extruder = 1 | ||
| support_material_interface_layers = 2 | ||
| support_material_interface_spacing = 0.2 | ||
| support_material_interface_speed = 100% | ||
| support_material_max_layers = 0 | ||
| support_material_pattern = pillars | ||
| support_material_pillar_size = 2.5 | ||
| support_material_pillar_spacing = 10 | ||
| support_material_spacing = 2 | ||
| support_material_speed = 40 | ||
| support_material_threshold = 55 | ||
| temperature = 210 | ||
| thin_walls = 1 | ||
| threads = 8 | ||
| toolchange_gcode = | ||
| top_fill_pattern = rectilinear | ||
| top_infill_extrusion_width = 0.4 | ||
| top_infill_pattern = rectilinear | ||
| top_solid_infill_speed = 40 | ||
| top_solid_layers = 6 | ||
| travel_speed = 150 | ||
| use_firmware_retraction = 0 | ||
| use_relative_e_distances = 0 | ||
| use_set_and_wait_bed = 0 | ||
| use_set_and_wait_extruder = 0 | ||
| use_volumetric_e = 0 | ||
| variable_layer_height = 1 | ||
| vibration_limit = 0 | ||
| wipe = 1 | ||
| wipe_into_infill = 0 | ||
| wipe_into_objects = 0 | ||
| wipe_tower = 0 | ||
| wipe_tower_bridging = 10 | ||
| wipe_tower_rotation_angle = 0 | ||
| wipe_tower_width = 60 | ||
| wipe_tower_x = 170 | ||
| wipe_tower_y = 140 | ||
| wiping_volumes_extruders = 70,70 | ||
| wiping_volumes_matrix = 0 | ||
| xy_size_compensation = 0 | ||
| z_offset = 0 | ||
| z_steps_per_mm = 0 |