添加基础编译

AndroidProducts.mk

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/full_mione.mk

BoardConfig.mk

@@ -0,0 +1,55 @@
+# config.mk
+#
+# Product-specific compile-time definitions.
+#
+
+# The generic product target doesn't have any hardware-specific pieces.
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_KERNEL := true
+
+TARGET_ARCH := arm
+TARGET_ARCH_VARIANT := armv7-a-neon
+TARGET_CPU_ABI := armeabi-v7a
+TARGET_CPU_ABI2 := armeabi
+TARGET_CPU_SMP := true
+ARCH_ARM_HAVE_TLS_REGISTER := true
+
+SMALLER_FONT_FOOTPRINT := true
+MINIMAL_FONT_FOOTPRINT := true
+# Some framework code requires this to enable BT
+BOARD_HAVE_BLUETOOTH := true
+
+WPA_SUPPLICANT_VERSION := VER_0_8_X
+
+TARGET_BOARD_PLATFORM := msm8660
+
+TARGET_USERIMAGES_USE_EXT4 := true
+
+TARGET_SYSTEMIMAGES_USE_EXT4 := true
+
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 214M
+
+# Wifi related defines
+#BOARD_WPA_SUPPLICANT_DRIVER := NL80211
+BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
+BOARD_HOSTAPD_DRIVER        := NL80211
+BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_bcmdhd
+BOARD_WLAN_DEVICE           := bcmdhd
+#BOARD_WLAN_DEVICE_REV	    := bcm4329
+WIFI_DRIVER_MODULE_NAME     := "bcm4329"
+WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/bcm4329.ko"
+WIFI_DRIVER_MODULE_ARG      := "firmware_path=/system/etc/firmware/fw_bcm4329.bin nvram_path=/system/etc/firmware/nvram.txt"
+WIFI_DRIVER_FW_PATH_PARAM   := "/sys/module/bcmdhd/parameters/firmware_path"
+WIFI_DRIVER_FW_PATH_STA     := "/system/etc/firmware/fw_bcmdhd.bin"
+WIFI_DRIVER_FW_PATH_AP      := "/system/etc/firmware/fw_bcmdhd_apsta.bin"
+WIFI_DRIVER_FW_PATH_P2P     := "/system/etc/firmware/fw_bcmdhd_p2p.bin"
+
+BOARD_USES_GENERIC_AUDIO := false
+
+BOARD_HAVE_BLUETOOTH := true
+BOARD_HAVE_BLUETOOTH_BCM := true
+
+BOARD_HAVE_GPS := true
+
+BOARD_USES_ALSA_AUDIO :=true
+

audio_effects.conf

@@ -0,0 +1,133 @@
+# List of effect libraries to load. Each library element must contain a "path" element
+# giving the full path of the library .so file.
+#    libraries {
+#        <lib name> {
+#          path <lib path>
+#        }
+#    }
+libraries {
+  bundle {
+    path /system/lib/soundfx/libbundlewrapper.so
+  }
+  reverb {
+    path /system/lib/soundfx/libreverbwrapper.so
+  }
+  visualizer {
+    path /system/lib/soundfx/libvisualizer.so
+  }
+  pre_processing {
+    path /system/lib/soundfx/libaudiopreprocessing.so
+  }
+  downmix {
+    path /system/lib/soundfx/libdownmix.so
+  }
+}
+
+# list of effects to load. Each effect element must contain a "library" and a "uuid" element.
+# The value of the "library" element must correspond to the name of one library element in the
+# "libraries" element.
+# The name of the effect element is indicative, only the value of the "uuid" element
+# designates the effect.
+# The uuid is the implementation specific UUID as specified by the effect vendor. This is not the
+# generic effect type UUID.
+#    effects {
+#        <fx name> {
+#            library <lib name>
+#            uuid <effect uuid>
+#        }
+#        ...
+#    }
+
+effects {
+  bassboost {
+    library bundle
+    uuid 8631f300-72e2-11df-b57e-0002a5d5c51b
+  }
+  virtualizer {
+    library bundle
+    uuid 1d4033c0-8557-11df-9f2d-0002a5d5c51b
+  }
+  equalizer {
+    library bundle
+    uuid ce772f20-847d-11df-bb17-0002a5d5c51b
+  }
+  volume {
+    library bundle
+    uuid 119341a0-8469-11df-81f9-0002a5d5c51b
+  }
+  reverb_env_aux {
+    library reverb
+    uuid 4a387fc0-8ab3-11df-8bad-0002a5d5c51b
+  }
+  reverb_env_ins {
+    library reverb
+    uuid c7a511a0-a3bb-11df-860e-0002a5d5c51b
+  }
+  reverb_pre_aux {
+    library reverb
+    uuid f29a1400-a3bb-11df-8ddc-0002a5d5c51b
+  }
+  reverb_pre_ins {
+    library reverb
+    uuid 172cdf00-a3bc-11df-a72f-0002a5d5c51b
+  }
+  visualizer {
+    library visualizer
+    uuid d069d9e0-8329-11df-9168-0002a5d5c51b
+  }
+  downmix {
+    library downmix
+    uuid 93f04452-e4fe-41cc-91f9-e475b6d1d69f
+  }
+  agc {
+    library pre_processing
+    uuid aa8130e0-66fc-11e0-bad0-0002a5d5c51b
+  }
+  aec {
+    library pre_processing
+    uuid bb392ec0-8d4d-11e0-a896-0002a5d5c51b
+  }
+  ns {
+    library pre_processing
+    uuid c06c8400-8e06-11e0-9cb6-0002a5d5c51b
+  }
+}
+# Audio preprocessor configurations.
+# The pre processor configuration consists in a list of elements each describing
+# pre processor settings for a given input source. Valid input source names are:
+# "mic", "camcorder", "voice_recognition", "voice_communication"
+# Each input source element contains a list of effects elements. The name of the effect
+# element must be the name of one of the effects in the "effects" list of the file.
+# Each effect element may optionally contain a list of parameters and their
+# default value to apply when the pre processor effect is created.
+# A parameter is defined by a "param" element and a "value" element. Each of these elements
+# consists in one or more elements specifying a type followed by a value.
+# The types defined are: "int", "short", "float", "bool" and "string"
+# When both "param" and "value" are a single int, a simple form is allowed where just
+# the param and value pair is present in the parameter description
+#    pre_processing {
+#        <input source name> {
+#            <fx name> {
+#                <param 1 name> {
+#                    param {
+#                        int|short|float|bool|string <value>
+#                        [ int|short|float|bool|string <value> ]
+#                        ...
+#                    }
+#                    value {
+#                        int|short|float|bool|string <value>
+#                        [ int|short|float|bool|string <value> ]
+#                        ...
+#                    }
+#                }
+#                <param 2 name > {<param> <value>}
+#                ...
+#            }
+#            ...
+#        }
+#        ...
+#    }
+
+#
+# TODO: add default audio pre processor configurations after debug and tuning phase
+#

full_mione.mk

@@ -0,0 +1,24 @@
+# Copyright (C) 2012 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base_telephony.mk)
+$(call inherit-product, build/target/product/generic.mk)
+
+PRODUCT_NAME := full_mione
+PRODUCT_DEVICE := mione
+PRODUCT_BRAND := CNSYS.ORG
+PRODUCT_MODEL := MI-One plus
+
+# default is nosdcard, S/W button enabled in resource
+DEVICE_PACKAGE_OVERLAYS := device/cnsys/mione/overlay
+#PRODUCT_CHARACTERISTICS := nosdcard