Kubernetes-native security tool kit.

Table of Contents

• Introduction
• Getting Started
• Next Steps
• Starboard CLI
  • Installation
    • From the Binary Releases
      • As a kubectl plugin
    • From Source (Linux, macOS)
    • Docker
  • Configuration
• Starboard Operator
  • Deployment
    • With Static YAML Manifests
    • With Helm
    • From OperatorHub.io or ArtifactHUB
  • Environment Variables
  • Install Modes
  • Supported Vulnerability Scanners
• Custom Security Resources Definitions
• Contributing
• Troubleshooting

Introduction

Starboard integrates security tools into the Kubernetes environment, so that users can find and view the risks that relate to different resources in a Kubernetes-native way. Starboard provides custom security resources definitions and a Go module to work with a range of existing security tools, as well as a kubectl-compatible command-line tool and an Octant plug-in that make security reports available through familiar Kubernetes tools.

Starboard can be run in two different modes:

• As a command-line tool, so you can trigger scans and view the risks in a kubectl-compatible way or as part of your CI/CD pipeline.
• As an operator to automatically update security report resources in response to workload and other changes on a Kubernetes cluster - for example, initiating a vulnerability scan when a new pod is started.

You can read more about the motivations and use cases here and join our discussions here.

Getting Started

The easiest way to get started with Starboard is to use Starboard CLI, which allows scanning Kubernetes workloads deployed in your cluster.

NOTE: Even though manual scanning through the command-line is useful, the fact that it's not automated makes it less suitable with a large number of Kubernetes workloads. Therefore, the Starboard Operator provides a better option for these scenarios, constantly monitoring built-in Kubernetes resources, such as Deployments, and running appropriate scanners against the underlying deployment descriptors.

To begin with, execute the following one-time setup command:

$ starboard init

The init subcommand creates the starboard namespace, in which Starboard executes Kubernetes Jobs to perform scans. It also sends custom security resources definitions to the Kubernetes API:

$ kubectl api-resources --api-group aquasecurity.github.io
NAME                   SHORTNAMES    APIGROUP                 NAMESPACED   KIND
ciskubebenchreports    kubebench     aquasecurity.github.io   false        CISKubeBenchReport
configauditreports     configaudit   aquasecurity.github.io   true         ConfigAuditReport
kubehunterreports      kubehunter    aquasecurity.github.io   false        KubeHunterReport
vulnerabilityreports   vulns,vuln    aquasecurity.github.io   true         VulnerabilityReport

There's also a starboard cleanup subcommand, which can be used to remove all resources created by Starboard.

As an example let's run an old version of nginx that we know has vulnerabilities. First, let's create a dev namespace:

$ kubectl create namespace dev

Create an nginx Deployment in the dev namespace:

$ kubectl create deployment nginx --image nginx:1.16 --namespace dev

Run the scanner to find the vulnerabilities:

$ starboard find vulnerabilities deployment/nginx --namespace dev

Behind the scenes, this uses Trivy to identify vulnerabilities in the container images associated with the specified deployment. Once this has been done, you can retrieve the latest vulnerability reports for this workload:

$ starboard get vulnerabilities deployment/nginx \
  --namespace dev \
  --output yaml

Starboard relies on labels and label selectors to associate vulnerability reports with the specified Deployment. For a Deployment with N container images Starboard creates N instances of vulnerabilityreports.aquasecurity.github.io resources. In addition, each instance has the starboard.container.name label to associate it with a particular container's image. This means that the same data retrieved by the starboard get vulnerabilities subcommand can be fetched with the standard kubectl get command:

$ kubectl get vulnerabilityreport \
  --selector starboard.resource.kind=Deployment,starboard.resource.name=nginx \
  --namespace dev \
  --output yaml

In this example, the nginx deployment has a single container called nginx, hence only one instance of the vulnerabilityreports.aquasecurity.github.io resource is created with the label starboard.container.name=nginx.

To read more about custom resources and label selectors check Custom Security Resources Specification.

The Starboard Octant plugin displays the same vulnerability reports in Octant's UI.

Check the plugin's repository for installation instructions.

Next Steps

Let's take the same nginx Deployment and audit its Kubernetes configuration. As you remember we've created it with the kubectl create deployment command which applies the default settings to the deployment descriptors. However, we also know that in Kubernetes the defaults are usually the least secure.

Run the scanner to audit the configuration using Polaris:

$ starboard polaris deployment/nginx --namespace dev

Retrieve the configuration audit report:

$ starboard get configaudit deployment/nginx \
  --namespace dev \
  --output yaml

or

$ kubectl get configauditreport \
  --selector starboard.resource.kind=Deployment,starboard.resource.name=nginx \
  --namespace dev \
  --output yaml

Similar to vulnerabilities the Starboard Octant plugin can visualize config audit reports. What's more important, Starboard and Octant provide a single pane view with visibility into potentially dangerous and exploitable vulnerabilities as well as configuration issues that might affect stability, reliability, and scalability of the nginx Deployment.

To learn more about the available Starboard commands and scanners, such as kube-bench or kube-hunter, use starboard help.

Starboard CLI

Starboard CLI is a single executable binary which can be used to find risks, such as vulnerabilities or insecure Pod specs, in Kubernetes workloads. By default, the risk assessment reports are stored as custom security resources.

To learn more about the available Starboard CLI commands, run starboard help or type a command followed by the -h flag:

$ starboard kube-hunter -h

Installation

This guide shows how to install the Starboard CLI from source, or from pre-built binary releases.

From the Binary Releases

Every release of Starboard provides binary releases for a variety of operating systems. These binary versions can be manually downloaded and installed.

1. Download your desired version
2. Unpack it (tar -zxvf starboard_darwin_x86_64.tar.gz)
3. Find the starboard binary in the unpacked directory, and move it to its desired destination (mv starboard_darwin_x86_64/starboard /usr/local/bin/starboard)

From there, you should be able to run Starboard CLI commands: starboard help

kubectl plugin

The Starboard CLI is compatible with kubectl and is intended as kubectl plugin, but it's perfectly fine to run it as a stand-alone executable. If you rename the starboard executable to kubectl-starboard and if it's in your path, you can invoke it using kubectl starboard.

You can also install Starboard as a kubectl plugin with the Krew plugins manager:

$ kubectl krew install starboard
$ kubectl starboard help

From Source (Linux, macOS)

Building from source is slightly more work, but is the best way to go if you want to test the latest (pre-release) version of Starboard.

You must have a working Go environment.

$ git clone [email protected]:aquasecurity/starboard.git
$ cd starboard
$ make

If required, it will fetch the dependencies and cache them. It will then compile starboard and place it in bin/starboard.

Docker

We also release the Docker image aquasec/starboard:$VERSION to run Starboard as a Docker container or to manually schedule Kubernetes scan Jobs in your cluster.

$ docker container run --rm aquasec/starboard:0.4.0 version
Starboard Version: {Version:0.4.0 Commit:dd8e49701c1817ea174061c8731fe5bdbfb73d93 Date:2020-09-21T09:36:59Z}

Configuration

The starboard init command creates the starboard ConfigMap in the starboard namespace, which contains the default configuration parameters. You can change the default config values with kubectl patch or kubectl edit commands.

For example, by default Trivy displays vulnerabilities with all severity levels (UNKNOWN,LOW,MEDIUM,HIGH,CRITICAL). However, you can opt in to display only HIGH and CRITICAL vulnerabilities by patching the trivy.severity value in the starboard ConfigMap:

$ kubectl patch configmap starboard -n starboard \
  --type merge \
  -p '{"data": {"trivy.severity":"HIGH,CRITICAL"}}'

The following table lists available configuration parameters.

CONFIGMAP KEY	DEFAULT	DESCRIPTION
trivy.httpProxy	N/A	The HTTP proxy used by Trivy to download the vulnerabilities database from GitHub. Only applicable if Trivy runs in the Standalone mode.
trivy.githubToken	N/A	The GitHub personal access token used by Trivy to download the vulnerabilities database from GitHub. Only applicable if Trivy runs in the Standalone mode.
trivy.severity	UNKNOWN,LOW,MEDIUM,HIGH,CRITICAL	A comma separated list of severity levels reported by Trivy
trivy.imageRef	docker.io/aquasec/trivy:0.14.0	Trivy image reference
trivy.mode	Standalone	Trivy client mode. Either Standalone or ClientServer.
trivy.serverURL	http://trivy-server.trivy-server:4954	The endpoint URL of the Trivy server. This parameter is required when Trivy runs in the ClientServer mode.
polaris.config.yaml	Check the default value here	Polaris configuration file

Note: You can find it handy to delete a configuration key, which was not created by default by the starboard init command. For example, the following kubectl patch command deletes the trivy.httpProxy key:

$ kubectl patch configmap starboard -n starboard \
  --type json \
  -p '[{"op": "remove", "path": "/data/trivy.httpProxy"}]'

Starboard Operator

This operator automatically updates security report resources in response to workload and other changes on a Kubernetes cluster - for example, initiating a vulnerability scan when a new pod is started. In other words, the desired state for this operator is that for each workload there are security reports stored in the cluster as custom resources.

Currently, the operator implements two reconciliation loops and only supports vulnerabilityreports security resources as depicted below. However, we plan to support all custom security resources.

Controller	Description
PodController	Watches for pod events in target namespaces to lookup the immediate owner of a pod. Then it checks whether there's the VulnerabilityReport owned by this owner. If not, it schedules a scan job in the operator's namespace.
JobController	Watches for job events in the operator's namespace. If a given job is completed it parses the logs of the controlee pod and converts the logs output to an instance of the VulnerabilityReport resource.

Deployment

With Static YAML Manifests

You can install the operator with provided static YAML manifests with fixed values. However, this approach has its shortcomings. For example, if you want to change the container image or modify default configuration parameters, you have to create new manifests or edit existing ones.

To deploy the operator in the starboard-operator namespace and configure it to watch the default namespace:

1. Send the definition of the vulnerabilityreports custom resource to the Kubernetes API:

   $ kubectl apply -f deploy/crd/vulnerabilityreports.crd.yaml
   

2. Send the following Kubernetes objects definitions to the Kubernetes API:

   $ kubectl apply -f deploy/static/01-starboard-operator.ns.yaml \
       -f deploy/static/02-starboard-operator.sa.yaml \
       -f deploy/static/03-starboard-operator.clusterrole.yaml \
       -f deploy/static/04-starboard-operator.clusterrolebinding.yaml
   

3. Create the starboard-operator deployment in the starboard-operator namespace to run the operator's container:

   $ kubectl apply -f deploy/static/06-starboard-operator.deployment.yaml
   

With Helm

Helm, which is de facto standard package manager for Kubernetes, allows installing applications from parameterized YAML manifests called Helm charts.

To address shortcomings of static YAML manifests we provide the Helm chart to deploy the Starboard operator. The starboard-operator Helm chart supports all install modes. For example, to install the operator in the starboard-operator namespace and configure it to watch foo and bar namespaces, run:

$ helm install starboard-operator ./deploy/helm \
    -n starboard-operator \
    --create-namespace \
    --set="targetNamespaces=foo\,bar"

From OperatorHub.io or ArtifactHUB

The Operator Lifecycle Manager (OLM) provides a declarative way to install and upgrade operators and their dependencies.

You can install the Starboard operator from OperatorHub.io or ArtifactHUB by creating an optional OperatorGroup, which defines the operator's multitenancy, and Subscription that links everything together to run the operator's pod.

1. Install the Operator Lifecycle Manager:

   $ curl -sL https://github.com/operator-framework/operator-lifecycle-manager/releases/download/0.16.1/install.sh | bash -s 0.16.1
   

2. Create the namespace to install the operator in:

   $ kubectl create ns starboard-operator
   

3. Declare the target namespaces by creating the OperatorGroup:

   cat << EOF | kubectl apply -f -
   apiVersion: operators.coreos.com/v1alpha2
   kind: OperatorGroup
   metadata:
     name: starboard-operator
     namespace: starboard-operator
   spec:
     targetNamespaces:
     - foo
     - bar
   EOF
   

4. Install the operator by creating the Subscription:

   cat << EOF | kubectl apply -f -
   apiVersion: operators.coreos.com/v1alpha1
   kind: Subscription
   metadata:
     name: starboard-operator
     namespace: starboard-operator
   spec:
     channel: alpha
     name: starboard-operator
     source: operatorhubio-catalog
     sourceNamespace: olm
   EOF
   

   The operator will be installed in the starboard-operator namespace and will be usable from foo and bar namespaces.

5. After install, watch the operator come up using the following command:

   $ kubectl get csv -n starboard-operator
   NAME                        DISPLAY              VERSION   REPLACES   PHASE
   starboard-operator.v0.6.0   Starboard Operator   0.6.0                Succeeded
   

Environment Variables

Configuration of the operator is done via environment variables at startup.

NAME	DEFAULT	DESCRIPTION
OPERATOR_NAMESPACE	N/A	See Install modes
OPERATOR_TARGET_NAMESPACES	N/A	See Install modes
OPERATOR_SCANNER_TRIVY_ENABLED	true	The flag to enable Trivy vulnerability scanner
OPERATOR_SCANNER_AQUA_CSP_ENABLED	false	The flag to enable Aqua vulnerability scanner
OPERATOR_SCANNER_AQUA_CSP_IMAGE	aquasec/scanner:5.0	The Docker image of Aqua scanner to be used
OPERATOR_LOG_DEV_MODE	false	The flag to use (or not use) development mode (more human-readable output, extra stack traces and logging information, etc).
OPERATOR_SCAN_JOB_TIMEOUT	5m	The length of time to wait before giving up on a scan job
OPERATOR_METRICS_BIND_ADDRESS	:8080	The TCP address to bind to for serving Prometheus metrics. It can be set to 0 to disable the metrics serving.
OPERATOR_HEALTH_PROBE_BIND_ADDRESS	:9090	The TCP address to bind to for serving health probes, i.e. /healthz/ and /readyz/ endpoints.

Install Modes

The values of the OPERATOR_NAMESPACE and OPERATOR_TARGET_NAMESPACES determine the install mode, which in turn determines the multitenancy support of the operator.

MODE	OPERATOR_NAMESPACE	OPERATOR_TARGET_NAMESPACES	DESCRIPTION
OwnNamespace	operators	operators	The operator can be configured to watch events in the namespace it is deployed in.
SingleNamespace	operators	foo	The operator can be configured to watch for events in a single namespace that the operator is not deployed in.
MultiNamespace	operators	foo,bar,baz	The operator can be configured to watch for events in more than one namespace.
AllNamespaces	operators		The operator can be configured to watch for events in all namespaces.

Supported Vulnerability Scanners

To enable Aqua as vulnerability scanner set the value of the OPERATOR_SCANNER_AQUA_CSP_ENABLED to true and disable the default Trivy scanner by setting OPERATOR_SCANNER_TRIVY_ENABLED to false.

To configure the Aqua scanner create the starboard-operator secret in the operators namespace:

$ kubectl create secret generic starboard-operator \
 --namespace $OPERATOR_NAMESPACE \
 --from-literal OPERATOR_SCANNER_AQUA_CSP_USERNAME=$AQUA_CONSOLE_USERNAME \
 --from-literal OPERATOR_SCANNER_AQUA_CSP_PASSWORD=$AQUA_CONSOLE_PASSWORD \
 --from-literal OPERATOR_SCANNER_AQUA_CSP_VERSION=$AQUA_VERSION \
 --from-literal OPERATOR_SCANNER_AQUA_CSP_HOST=http://csp-console-svc.aqua:8080

Custom Security Resources Definitions

This project houses CustomResourceDefinitions (CRDs) related to security and compliance checks along with the code generated by Kubernetes code generators to write such custom resources in a natural way.

NAME	SHORTNAMES	APIGROUP	NAMESPACED	KIND
vulnerabilityreports	vulns,vuln	aquasecurity.github.io	true	VulnerabilityReport
configauditreports	configaudit	aquasecurity.github.io	true	ConfigAuditReport
ciskubebenchreports	kubebench	aquasecurity.github.io	false	CISKubeBenchReport
kubehunterreports	kubehunter	aquasecurity.github.io	false	KubeHunterReport

See Custom Security Resources Specification for the detailed explanation of custom resources used by Starboard and their lifecycle.

Contributing

At this early stage we would love your feedback on the overall concept of Starboard. Over time we'd love to see contributions integrating different security tools so that users can access security information in standard, Kubernetes-native ways.

• See CONTRIBUTING.md for information about setting up your development environment, and the contribution workflow that we expect.
• See ROADMAP.md for tentative features in a 1.0 release.
• Join our discussions.

Troubleshooting

"starboard" cannot be opened because the developer cannot be verified. (macOS)

Since Starboard CLI is not registered with Apple by an identified developer, if you try to run it for the first time you might get a warning dialog. This doesn't mean that something is wrong with the release binary, rather macOS can't check whether the binary has been modified or broken since it was released.

To override your security settings and use the Starboard CLI anyway, follow these steps:

1. In the Finder on your Mac, locate the starboard binary.

2. Control-click the binary icon, then choose Open from the shortcut menu.

3. Click Open.

   

   The starboard is saved as an exception to your security settings, and you can use it just as you can any registered app.

You can also grant an exception for a blocked Starboard release binary by clicking the Allow Anyway button in the General pane of Security & Privacy preferences. This button is available for about an hour after you try to run the Starboard CLI command.

To open this pane on your Mac, choose Apple menu > System Preferences, click Security & Privacy, then click General.